topblog Ivoire blogs

23/05/2019

How to use Launch X431 V code E60 BMW 535xi (N54) INJECTORS?

Look here: how to use Launch X431 V to recode or change the injector flow rate for BMW’s, this was done a 2008 E60 535xi with the N54 direct injection twin turbo engine.

 

Select "BMW" - then "OK" to confirm the BMW newest Version (V50.00) is not the newest version, here is just an example.

launch_x431_how_to_code_e60_bmw_535xi_n54_injectors-01 launch_x431_how_to_code_e60_bmw_535xi_n54_injectors-01 launch x431 how to code e60 bmw 535xi n54 injectors 3

Automatically search.

launch x431 how to code e60 bmw 535xi n54 injectors 4

 

Information

1.If equipped with two socket, 20-pin and 16-pin, please use [BMW-20] connector.

launch x431 how to code e60 bmw 535xi n54 injectors 5 launch x431 how to code e60 bmw 535xi n54 injectors 6 launch x431 how to code e60 bmw 535xi n54 injectors 7

 

Read out the BMW information.

launch x431 how to code e60 bmw 535xi n54 injectors 8 launch x431 how to code e60 bmw 535xi n54 injectors 9

 

Help Information:

To ensure the accuracy of the test results, Do the following:

  1. Turn off the Ignition Switch.
  2. Wait 10 seconds.
  3. Turn on the ignition switch.

launch x431 how to code e60 bmw 535xi n54 injectors 10 launch x431 how to code e60 bmw 535xi n54 injectors 11 launch x431 how to code e60 bmw 535xi n54 injectors 12 launch x431 how to code e60 bmw 535xi n54 injectors 13

 

Select "System Scan".

launch x431 how to code e60 bmw 535xi n54 injectors 14

Select "Drive" , then "ECM (Engine Control Module -DME/DDE)".

launch x431 how to code e60 bmw 535xi n54 injectors 15 launch x431 how to code e60 bmw 535xi n54 injectors 16

 

ECU Identify.

launch x431 how to code e60 bmw 535xi n54 injectors 17

 

Special Function.

launch x431 how to code e60 bmw 535xi n54 injectors 18

 

Select "Adjust Injectors."

launch x431 how to code e60 bmw 535xi n54 injectors 19

 

Selection:

  1. Description of Injector Rate Adjustment.

launch x431 how to code e60 bmw 535xi n54 injectors 20 launch x431 how to code e60 bmw 535xi n54 injectors 21 launch x431 how to code e60 bmw 535xi n54 injectors 22 launch x431 how to code e60 bmw 535xi n54 injectors 23

  1. Perform Injector Quantity Compensation.

launch x431 how to code e60 bmw 535xi n54 injectors 24 launch x431 how to code e60 bmw 535xi n54 injectors 25 launch x431 how to code e60 bmw 535xi n54 injectors 26

 

End the session.

Launch X431 V to recode or change the injector flow rate for E60 BMW 535xi (N54),works  done!

Enjoy.

 

www.obdexpress.co.uk

 

 

 

http://www.obdexpress.co.uk/service/launch-x431-v-to-reco...

22/05/2019

Yanhua Mini ACDP On BMW Mini Cooper key programming: 100% Work!

Confirmed: BMW Mini Cooper remote programming can be done by Yanhua Mini ACDP programmer.

If it is CAS3, ACDP can do via OBD, if it is CAS3+, ACDP can do only after dismantling the CAS3+ and program new key using interface board.

 

Method 1: ACDP program remote on Mini Cooper using the interface board

 


Method 2: ACDP program remote on Mini Cooper via OBD

Obd port: located in the driver side, on the left

Yanhua-ACDP-CAS3-add-key-1

Connection: Mini ACDP is connected to the car, through OBD

Yanhua-ACDP-CAS3-add-key-2 Yanhua-ACDP-CAS3-add-key-3

The test:

Insert the key

Run Mini ACDP application on the mobile

Run BMW module programming

Yanhua-ACDP-CAS3-add-key-4

Select CAS3/CAS3+

Yanhua-ACDP-CAS3-add-key-5

OBD mode

Yanhua ACDP CAS3 add key-6

Immobilizer

Yanhua ACDP CAS3 add key-7

Step 1: read CAS data

Step 2: generate a dealer key/program a key

Step 3: write new key data into CAS

Step 1: read CAS data

ACDP is gonna to read CAS data

Yanhua ACDP CAS3 add key-8

Pop-up: Take out the key and wait for 5 min.

If the key without ignition-start function, take the key outside the car, 3m away

Read immo data successfully

Yanhua ACDP CAS3 add key-9

File (CAS3_ORGKEYxxxx.bin) has been backup.

Yanhua ACDP CAS3 add key-10

Upload bin file

Save the immo data to generate a dealer key

Yanhua ACDP CAS3 add key-11

 

Step 2: generate a dealer key/program a key

Yanhua ACDP is gonna to add a new key

Check the connection of BAV adapter

Prepare a blank key

Choose the correct bin file with immo data

Yanhua ACDP CAS3 add key-12

Here select Key 5 to program

Yanhua ACDP CAS3 add key-13

Note: Gray number is used for the original key

The black numbers are available for calculation

Pop-up: It’s one of keys available. If you enable a new key, the original key will not work anymore.

Yanhua ACDP CAS3 add key-14

Select a method to generate a dealer key

Here: add a new key with a working key

Yanhua ACDP CAS3 add key-15

Check if the key is a smart one or not. If yes, you have to choose Key 1-3

Here: it’s not a smart key

Go to add a new key

Insert the blank key to program

Yanhua ACDP CAS3 add key-16

Programming...

ACDP successfully programmed a new key

The generated CAS data includes the new key info.

Pls go to write new data into CAS

Yanhua ACDP CAS3 add key-17

File is backup

Upload file (will be written into CAS...DLRKEY...bin)

 

Step 3: write new key data into CAS

Insert the original key before you’re gonna to write data into CAS

Yanhua ACDP CAS3 add key-18

Go to update key data

Select the correct bin file

Yanhua ACDP CAS3 add key-19

Select a method to generate a dealer key

Here: add a new key with a working key

Updating new immo data

(writing the key data into CAS)

Immo data is updated successfully.

Yanhua ACDP CAS3 add key-20

Backup data

Please install the CAS into the car and try the new key to start.

Yanhua ACDP CAS3 add key-21 Yanhua ACDP CAS3 add key-22

The ELV is faulty; you should synchronize it

 Yanhua ACDP CAS3 add key-23

Go to special function, synchronize CAS and ELV

 Yanhua ACDP CAS3 add key-24

Synchronize CAS and ELV successfully

 Yanhua ACDP CAS3 add key-25

Backup data

Insert the new key again to start

 Yanhua ACDP CAS3 add key-26

The dashboard works well, without fault codes

 Yanhua ACDP CAS3 add key-27

 

Done.

 

 

http://blog.obdexpress.co.uk/2019/05/21/acdp-on-bmw-mini-...

17/05/2019

MOE BMW engineering system for programming and coding to 2019

MOE BMW engineering system contains the most famous BMW software for programming and coding E,F and G series, database up to 2019.

Has the famous software of navigation , FSC , NBT, ECU programming, cheat coding...

Manual coding and automatic programming

all software are original use of BMW

Some of software like / istap/ ista D / esys/ esys launcher /ISN editor, HUTool, Cas3 repair, FSC coding, AI Coder bmw, Dr gini BMW, use manuals , hardware repair manual,... and much more

moe-bmw-engineering-system-for-programming-and-coding-01 moe-bmw-engineering-system-for-programming-and-coding-02

 

In details with images:

  1. ISTA+ May 12, 2019

moe-bmw-engineering-system-for-programming-and-coding-03 moe-bmw-engineering-system-for-programming-and-coding-04

 

ISTA+ is Multilanguage available

moe-bmw-engineering-system-for-programming-and-coding-5

 

ISTA /P version: 66.0.200

moe-bmw-engineering-system-for-programming-and-coding-6

 

Launcher PRO V3.1.1.133

Tick on "High" then click on "Launch Now".

moe-bmw-engineering-system-for-programming-and-coding-7 moe-bmw-engineering-system-for-programming-and-coding-8

 

BMW PSdZData Tool -ISTA-P.

moe-bmw-engineering-system-for-programming-and-coding-9

 

AI Coder bmw

moe-bmw-engineering-system-for-programming-and-coding-10 moe-bmw-engineering-system-for-programming-and-coding-11

Freischalt-Tool 02.02.00

moe-bmw-engineering-system-for-programming-and-coding-12

 

Inpa

moe-bmw-engineering-system-for-programming-and-coding-13 moe-bmw-engineering-system-for-programming-and-coding-14 moe-bmw-engineering-system-for-programming-and-coding-15

 

TestO [26-Jun-2017] - [ECU List]

moe-bmw-engineering-system-for-programming-and-coding-16

HU Tool v2.6. PRE

moe-bmw-engineering-system-for-programming-and-coding-17

CIC Special Service Utility.

moe-bmw-engineering-system-for-programming-and-coding-18

 

CIC Language Coding Utility.

moe-bmw-engineering-system-for-programming-and-coding-19

 

Dr.Gini B021 - Basic

moe-bmw-engineering-system-for-programming-and-coding-20

Perfekt Toolbox (32-bit) 0.1a

moe-bmw-engineering-system-for-programming-and-coding-21

HU - Service Manager ver.0.2 beta by BMWTOOLS.INFO

22

ISN ver [0.12.04.16]

moe-bmw-engineering-system-for-programming-and-coding-23

BMW CIC / NBT FSC Generator

moe-bmw-engineering-system-for-programming-and-coding-24

 

SW ID reader (DE) v1.2.1

moe-bmw-engineering-system-for-programming-and-coding-25

SW ID reader (1B) v1.2.1

moe-bmw-engineering-system-for-programming-and-coding-26

BMW_CIC_FSC_Generator

moe-bmw-engineering-system-for-programming-and-coding-27

Swt to FSC.

moe-bmw-engineering-system-for-programming-and-coding-28

Explorer.

moe-bmw-engineering-system-for-programming-and-coding-29

EWS Editor v3.2.0

moe-bmw-engineering-system-for-programming-and-coding-30

IBAC Activation codes Ge...

moe-bmw-engineering-system-for-programming-and-coding-31

Avtotools DME/DDE Password Extractor.

moe-bmw-engineering-system-for-programming-and-coding-32

CAS4 Mileage Tool r20140617

moe-bmw-engineering-system-for-programming-and-coding-33

CAS 3+ Editor

moe-bmw-engineering-system-for-programming-and-coding-34

Siemens MS41 ews delete

moe-bmw-engineering-system-for-programming-and-coding-35

DDE/DME SA-option Helper v1.1

moe-bmw-engineering-system-for-programming-and-coding-36

BMW Coding Database.

moe-bmw-engineering-system-for-programming-and-coding-37

KSD 2.

moe-bmw-engineering-system-for-programming-and-coding-38

ETK 3.1.90

moe-bmw-engineering-system-for-programming-and-coding-39

Tools.

moe-bmw-engineering-system-for-programming-and-coding-40

Manuals.

moe-bmw-engineering-system-for-programming-and-coding-41

MOE BMW engineering system

http://www.obdexpress.co.uk/wholesale/moe-bmw-engineering...

 

500GB

in HDD or SSD

Running WIN10


http://blog.obdexpress.co.uk/2019/05/17/moe-bmw-engineeri...

11:00 Publié dans car diagnosis tool | Tags : moe bmw | Lien permanent | Commentaires (0)