topblog Ivoire blogs

07/08/2019

How to solve Renault Can Clip don't support a MAJ

Everything is in the title: My probe Renault Can Clip (SP19-A) bought at the beginning of the year worked very well, but I had not used it since the summer. When I launched the app this week end, he indicated an error message, then tried to do a firmware update (I had yet put on 4 indicator Quivabien, but this was not enough seems he: besides, the messages that appeared were not those that others mention).

In any case, now she is crackedWhen I plug it into my computer, it no longer appears any device, but only an unidentified hub (which must be the common part to 4 devices that were supposed to appear).

I was already on the V174 (which worked well, until this problem, and continues to open normally).

Question:

Is there anything to do to avoid buying a whole? I read somewhere on the internet that it was possible to change one of the chips? (not the cypress, but a Motorola) Some of you have they done (and succeeded) that?

 

Possible reason:

I really think the problem is in the probe, now, because the device manager sees nothing when I plug it except a hub. If it was just a driver pb, he would see behind unknown devices, each with its VID and PID

 

Finally Solved:

Finally my probe works perfectly! I read that the standard procedure requires to connect not only the USB side + 5V but also the side of the vehicle + 12V. By doing so, it starts well

The funny thing is that when I received it and started to use it, I could start the probe without the 12V, (that is, the two red lights already lighted up with only USB, and that seems to have changed.

 

How to solve Renault Can Clip don't support a MAJ

Everything is in the title: My probe Renault Can Clip (SP19-A) bought at the beginning of the year worked very well, but I had not used it since the summer. When I launched the app this week end, he indicated an error message, then tried to do a firmware update (I had yet put on 4 indicator Quivabien, but this was not enough seems he: besides, the messages that appeared were not those that others mention).

In any case, now she is crackedWhen I plug it into my computer, it no longer appears any device, but only an unidentified hub (which must be the common part to 4 devices that were supposed to appear).

I was already on the V174 (which worked well, until this problem, and continues to open normally).

Question:

Is there anything to do to avoid buying a whole? I read somewhere on the internet that it was possible to change one of the chips? (not the cypress, but a Motorola) Some of you have they done (and succeeded) that?

 

Possible reason:

I really think the problem is in the probe, now, because the device manager sees nothing when I plug it except a hub. If it was just a driver pb, he would see behind unknown devices, each with its VID and PID

 

Finally Solved:

Finally my probe works perfectly! I read that the standard procedure requires to connect not only the USB side + 5V but also the side of the vehicle + 12V. By doing so, it starts well

The funny thing is that when I received it and started to use it, I could start the probe without the 12V, (that is, the two red lights already lighted up with only USB, and that seems to have changed.