topblog Ivoire blogs

31/07/2019

How to do EGR off of Zafira 2.2 dti with MPPS V18

Need to do EGR off of Zafira 2.2 dti, I read it with MPPS v18, but I can't write any file I have changed. Mpps can't do it and winols doesn't recognize a ECU.

https://mega.nz/#!1UoRTQAL!nbgp2BJ8zWOxSys3jDCZz-44jpbXVJ...

 

Answer:

I am reading it directly, my mpps works without any problem, I can read and write files to psg16 without any problem but only original ones without modifications. I need good file with correct checksum.

 

Finally, I have done it already with my file, and everything is ok.

 

For all with problems like mine:

The problem was in the security access, the first try is unsuccessful and you must not power off the ecu, a second try is with success. That was my fault, every time I was resetting a pump.

 

 http://blog.obdexpress.co.uk/2019/07/31/egr-off-of-zafira...

30/07/2019

How to read Kia kefico m7.9.8 with trastata, Ktag and FGTech?

Have Kia kefico m7.9.8 to read the ECU pinout boot mode or BDM, need Ktag, FGTech, transdata.This article is available with how to read FGTECH and how to read with transdata and Ktag etc.

 

read-kia-kefico-m7.9.8-00

 

  1. Read Kia kefico m7.9.8 with FGTech, here is a tutorial

http://blog.obdexpress.co.uk/2017/08/08/fgtech-galletto-v...

 

  1. Read Kia kefico m7.9.8 with transdata and Ktag, here is a tutorial.

 

BOSCH_M798_KIA

The LAY by pins are located on the lower part of the ECU

PLUGIN 167

read-kia-kefico-m7.9.8-01

 

Connect the power (+12v) only for DIRECT CONNECTION,

do not connect power (+12V) with DIMA CONNECTION

read-kia-kefico-m7.9.8-02

DIRECT CONNECTION

Connect the universal wiring to POL4 & POL5 and to the ECU connector as shown in the pictures.

read-kia-kefico-m7.9.8-03

 

DIMA CONNECTION

Connect the blue wire to POL5 and to DIMA adapter as shown in the picture.

read-kia-kefico-m7.9.8-04 read-kia-kefico-m7.9.8-05

 

I would advise using pencil, it is always faster, comfortable and clean to work.

read-kia-kefico-m7.9.8-06

 

From http://www.obdexpress.co.uk/wholesale/bdm-frame-cmd-bdm10...

 

 

http://blog.obdexpress.co.uk/2019/07/30/how-to-read-kia-k...

08:49 Publié dans Car ECU programmer | Tags : ktag | Lien permanent | Commentaires (0)

29/07/2019

How to use JMD OBD to calibrate the odometer on Buick Excelle 2013?

Look here:Buick Excelle 2013 odometer correction with JMD OBD

jmd-obd-calibrates-odometer-on-buick-excelle-2013-01

Prepare:

Use a phone to download JMD APP on the official site

http://www.handy-baby.net/download.html

 

Have one JMD OBD

jmd-obd-calibrates-odometer-on-buick-excelle-2013-00

From http://www.obdexpress.co.uk/wholesale/jmd-obd-adapter-for...

Youtube video demo:

 

Firstly, start up the dashboard.

The old mileage is 81385 kilometer.

 

jmd-obd-calibrates-odometer-on-buick-excelle-2013-3

Insert the JMD OBD into the OBD2 port of the car.

jmd-obd-calibrates-odometer-on-buick-excelle-2013-2

Open the JMD APP.

Find out "OBD".

jmd-obd-calibrates-odometer-on-buick-excelle-2013-4

 

Tap "Band".

Add bind

Menu updates, download from internet.

Loading IMMO data, please wait.

Loading Match data, please wait.

Loading ODO data, please wait.

Tap ODO -> America -> Buick -> Excelle GT/XT -> IC -> Odometer Calibration.

Input a new mileage like 81384.

Writing the new mileage

Mileage calibration success.

Have new mileage 81384 on the dashboard.

jmd-obd-calibrates-odometer-on-buick-excelle-2013-5

jmd-obd-calibrates-odometer-on-buick-excelle-2013-6

jmd-obd-calibrates-odometer-on-buick-excelle-2013-7

jmd-obd-calibrates-odometer-on-buick-excelle-2013-8

jmd-obd-calibrates-odometer-on-buick-excelle-2013-9

jmd-obd-calibrates-odometer-on-buick-excelle-2013-10

jmd-obd-calibrates-odometer-on-buick-excelle-2013-11

jmd-obd-calibrates-odometer-on-buick-excelle-2013-12

jmd-obd-calibrates-odometer-on-buick-excelle-2013-13

 

Source:http://www.mileageprogrammer.com/jmd-obd-calibrates-odome...