topblog Ivoire blogs

16/07/2019

MB SD Connect C4 DOIP XENRTY Test On BENZ E213

In this article, Newest SDC4 Mercedes Benz Xentry diagnosis software is used to test Actuation of function "Ethernet communication (DOIP). It is better than old sdc4 without installing the battery when upgrading the firmware, it is better than vxdiag C6 because it can directly run the original software.

 

Mercedes Benz SD C4 with 1:1 copy program is supposed to be the best DOIP diagnostic tool, it features in:

  1. When it upgrades the firmware, you don't need to install the batteries as the old SDC4, which is convenient and avoid the damage to the hardware.

 

  1. The Wifi will be automatically connected after starting on SDC4 and it is very stable. You can use the WIFI to surf the net and diagnose Benz, so the testing job can be finished remotely.

 

  1. New SDC4 is made of superb craftsmanship and good quality, waterproof, shockproof and tamper-proof.

 

  1. Can directly run the original software.

 

How to's of Newest SDC4 test Doip?

VIDEO DEMO:

 

Enter VIN number.

xentry-test-actuation-of-function-ethernet-communication-doip-01

 

Click on "Xentry Diagnosis".

xentry-test-actuation-of-function-ethernet-communication-doip-02

 

Determination of vehicle data.

xentry-test-actuation-of-function-ethernet-communication-doip-03

 

The diagnosis application is being started.

The boundary conditions are recorded.

The control units are being initialized.

Check of VIN.

The coding of the control unit is read.l

The emissions-relevant data are read out from the vehicle.

xentry-test-actuation-of-function-ethernet-communication-doip-04

 

Click on "Initial Quick Test".

xentry-test-actuation-of-function-ethernet-communication-doip-05xentry-test-actuation-of-function-ethernet-communication-doip-06

 

Click on "A26/17 -Audi 20 (Head unit).".

xentry-test-actuation-of-function-ethernet-communication-doip-07

 

Click on "Continue".

xentry-test-actuation-of-function-ethernet-communication-doip-08xentry-test-actuation-of-function-ethernet-communication-doip-09xentry-test-actuation-of-function-ethernet-communication-doip-10xentry-test-actuation-of-function-ethernet-communication-doip-11xentry-test-actuation-of-function-ethernet-communication-doip-12

 

Actuations -> Actuation of function "Ethernet communication (DOIP)"

xentry-test-actuation-of-function-ethernet-communication-doip-13xentry-test-actuation-of-function-ethernet-communication-doip-14xentry-test-actuation-of-function-ethernet-communication-doip-15xentry-test-actuation-of-function-ethernet-communication-doip-16xentry-test-actuation-of-function-ethernet-communication-doip-17xentry-test-actuation-of-function-ethernet-communication-doip-18xentry-test-actuation-of-function-ethernet-communication-doip-19

 

Done.

 The newest BENZ C4 DOIP Diagnostic tool For sale:

http://www.obdexpress.co.uk/wholesale/mb-sd-c4-doip-diagn...

 

 

Source:http://blog.obdexpress.co.uk/2019/07/16/xentry-ethernet-c...

06/04/2017

SDconnect C4 Wlan Error 2 Solved: Reset IP address

I have bought a Chinese SD Connect C4 MUX. Connected via the green LAN cable everything is working great on a EVG7 tablet with SSD and 2017.3 Xentry.

 

Problem is i cannot get the wireless working.

MUX display WLanError 2 , and the Wlan mac id is blank on the unit.

 

the Wlan Error2

sdconnect-c4-wlan-error-2-message-2

see the screenshots

 

sdconnect-c4-wlan-error-2-message-1 sdconnect-c4-wlan-error-2-message-2 sdconnect-c4-wlan-error-2-message-3

Here is a solution…tested OK by professionals.

 

RESET LAN & WLAN IP address as follows:

 

On Desktop, right click to go to Personalize

sdconnect-c4-reset-ip-1

Control Panel-> Network and Internet-> Network and Sharing Center

sdconnect-c4-reset-ip-2 sdconnect-c4-reset-ip-3

Network Connection-> Local Area Connection 2 Properties-> Internet Protocol Version 4 (TCP/Pv4) Properties

Use the following IP address:

IP address: 172.29.127.119

Subnet mask: 255.255.255.0

sdconnect-c4-reset-ip-4

Change adapter settings

sdconnect-c4-reset-ip-5

Network Connection-> Wireless Network Connection 3 Properties-> Internet Protocol Version 4 (TCP/Pv4) Properties

Use the following IP address:

IP address: 192.168.2.110

Subnet mask: 255.255.255.0

sdconnect-c4-reset-ip-6

 

Open Road24h Ad-Hoc Connector for C4 Mux

Click on -1- Make Roard24h Ad-hoc Profile, then OK

sdconnect-c4-reset-ip-7

Click on -2- Connect to MUX via Road24h, then OK

sdconnect-c4-reset-ip-8 sdconnect-c4-reset-ip-9

Road24h now is connecting

sdconnect-c4-reset-ip-10

 

Open Administration

SDconnect Toolkit

Information

sdconnect-c4-reset-ip-11

Register/Configure

Setup Encryption: WEP/ Hex

sdconnect-c4-reset-ip-12

Enter the key

sdconnect-c4-reset-ip-13

Copy the key as the network security key

sdconnect-c4-reset-ip-14

Start

sdconnect-c4-reset-ip-15

Road14h is connected

sdconnect-c4-reset-ip-16

The network location is now Work

sdconnect-c4-reset-ip-17

SDconnect Toolkit Preview

sdconnect-c4-reset-ip-18

 

 

It’s working!

 

Xentry/DAS can be used via WIFI.

http://blog.obdexpress.co.uk/2017/04/06/sdconnect-c4-wlan...