topblog Ivoire blogs

10/03/2017

Carprog V8.21 change Golf VI 2011 mileage & read& write Immo data

Here tested  Carprog V8.21 two function on  Golf VI 2011 :Immobilizer and odometer ajustment.

 

 

1.Carprog V8.21 change Golf VI 2011 mileage just 1 step!

 

Click “Change KM” and it will show the old value both in KM and ML. Choose “ML” option and enter a new value then click “Change”. In this way, Carprog V8.21 change mileage for Golf VI 2011 easily!

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-12

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-12

 

 

 

Carprog V8.21 read& write Golf VI 2011 Immo data in 3 steps

 

Step1. Open Carprog V8.21 software then choose “DASHBOARD”→ “VW” → “GOLF 2009 ONLINE DIAG V0.2”.

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-1

 

Click “Read Immo” and wait its connecting.

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-2

 

Create a txt file on desktop named “Immo-Data-for-Golf- VI” as below:

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-3

 

 

When Carprog read out the Immo data, copy the VIN, PIN, CS and MAC to txt file “ori-cluster-2011” section.

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-4

 

Step2. Go to main menu and choose “TRANSPONDER” → “VAG NEC KEY V0.1”.

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-5

 

Choose “VW (TP23)”, click the third button at top then click “Write”.

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-6

 

Click “OK” to start write then write OK.

 

Click the first button at top to open folder “VW-Golf- VI-2011”, choose “Immo-Data-for-Golf- VI-2011-carprog-read” then click “Open”.

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-7

 

Click “Write” then write OK.

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-8

 

Write key to Immo file: Choose “Key 3” then click “OK”. Choose “Immo-Data-for-Golf- VI-2011-carprog-read” file and change the file name as “Immo-Data-for-Golf- VI-2011-carprog-read-with-key-3”. Click “Save”.

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-9

 

Step3. Back to “DASHBOARD”→ “VW” → “GOLF 2009 ONLINE DIAG V0.2”.

 

Click “Open”

 

Open “Immo-Data-for-Golf- VI-2011-carprog-read-with-key-3”

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-10

 

Click “Write Immo”, click “OK” then wait it OK.

 

carprog-v8-21-online-vw-golf-6-mileage-immo-key-11

 

Source:http://www.mileageprogrammer.com/carprog-v8-21-read-write...

 

 

 

 

 

www.golotool.com

22/08/2016

How to reset BMW airbag with Carprog v8.21 v9.31

It just takes 1 minute to reset and repair airbag computer in your office, with the new CarProg v8.21 or CarProg v9.31 airbag reset tool.

 

Why you need to reset or replace airbag tool?

BWM airbag sensor after car crash and airbag deployment can by locked (Control unit faulty) and

must be replaced. Even after small accident Airbag sensor will write in internal memory special

error message "crash data stored" or “computer fault” and after you need to exchange very

expensive sensor to new one.

 

What is best for airbag reset?

You are advice the new Carprog airbag reset tool, not the old one

New airbag reset tool vs old airbag reset tool

airbag-reset-tool-new-old

+/- supported units ZAE, MRSZ, MRSZ3, MRSZ4 (not all)

+ supported units BAE, ZAE, ZAE2, MRSZ, MRSZ2, MRSZ3, MRSZ4

 

How to use new CarProg for BMW Airbag ECUs?

1- BAE

bmw-airbag-bae-1

bmw-airbag-bae-2

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

2- ZAE

No need to remove from car!

EEPROM read/write, Crash Data clear, Error Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

3- ZAE2

No need to remove from car!

EEPROM read/write, Crash Data clear, Error Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

4- MRSZ

bmw-airbag-mrsz-1

bmw-airbag-mrsz-2

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

5- MRSZ2

bmw-airbag-mrsz2-1

bmw-airbag-mrsz2-2

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

6- MRSZ3 - Temic

 

bmw-airbag-mrsz3-temic-1

bmw-airbag-mrsz3-temic-2

 

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

7- MRSZ3 - Bosch

bmw-airbag-mrsz3-bosch-1

bmw-airbag-mrsz3-bosch-2

 

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

8- MRSZ4 - Temic

bmw-airbag-mrsz4-temic-1

bmw-airbag-mrsz4-temic-2

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

9- MRSZ4 - Bosch

bmw-airbag-mrsz4-bosch-1

bmw-airbag-mrsz4-bosch-2

No need to remove from car!

EEPROM read/write, Crash Data clear, Error

Memory read/erase.

Pin 9 – K line

Pin 5 - +12V

Pin 6 - GND

 

Using these pictures you can erase airbag “on the table” – you must connect GND, +12V,

and Diagnostic line between airbag sensor and BMW Airbag Eraser, connect power supply to GND and +12V and use Eraser like in the car. After erasing don’t connect power supply again – BMW airbag sensor is very sensitive and can write “controller malfunction” error after connection on the table without car.

 

OBDII – BMW 20 pin connection diagram

Also, you can user any OBDII to BMW converter

BMW 20 pin connector

bmw-20-pin-connector

BMW OBDII connector

bmw-obdii-connectorbmw-obd2-connector-20pin-connector

source:http://www.obdexpress.co.uk/service/how-to-reset-bmw-airb...

08:26 Publié dans Blog | Tags : carprog v8.21 | Lien permanent | Commentaires (0)