topblog Ivoire blogs

10/05/2018

How to use CarProg for Audi A3, TT, R8 dashboard 2010+

Here, i’d like to share a tutorial released by codecard.eu. It’s for the educational purpose only.

Car: Audi A3, TT, R8 2010+

Purpose: read/write EEPROM, change odometer, read/write immo data for key programming or dashboard cloning

Optional tools: Carprog copy version or genuine, or VVDI2 Xhorse

Tutorial:How to get CarProg to work for Audi A3, TT, R8 (2010+):

 
  • CarProg changes mileage in the car by OBDII:

Connect CarProg with A1 adapter to car OBDII.

Load A3/TT 2009-2011 OBDII software. Switch ignition ON.

Push “Prepare Unlock Dump” – odometer will be reseted to 0km.

Push “Change KM”

CarProg will show 0km

Enter new odometer value and push “OK”

Odometer correction is complete!

 

  • CarProg adds new key (if one working key exists):

connect CarProg with A1 adapter to car OBDII.

Load A3/TT 2009-2011 OBDII software.

Switch ignition ON.

Note original odometer value. Push “Prepare Unlock Dump”.

Odometer will be changed to 0km.

Swich ignition OFF.

 

  1. Remove dash from car and read EEPROM 24C32 manualy (using CarProg EEPROM software);
    2. Save this EEPROM dump;
    3. Put dash back to car and connect via OBDII again;
    4. Press button “Load unlock dump” and load saved eeprom file.
    5. Now you can read IMMO file with button “Read immo”
    6. Save this immo file;
    7. Load VAG KEY software;
    8. Open immo file, put transponder to the Carprog A3 antena and press write button;
    9. Choose new key possition and save new immo file;
    10. Load A3/TT 2009-2011 OBDII software;
    11. Press button “Load unlock dump” and load saved EEPROM file again. Load new immo file with “Open” button.
    12. Write immo file with “Write immo” button. Write old odometer with “Change KM” button
  • CarProg programs new keys when all keys are lost (IMMO IS ACTIVE):
  1. Remove dash from car and read eeprom 24C32 manualy (using CarProg EEPROM software);
    2. Save this EEPROM dump to have backup;
    3. Fill EEPROM dump range 0x812 – 0x9BF in hex editor with FF FF … ;
    4. Write this damaged dump to EEPROM;
    5. Put dash back to car and connect via OBDII again; Cluster display will show “Error”;
    6. Push “Prepare Unlock Dump”; Odometer will reset to 0km;
    7. Remove dash from car and read EEPROM again 24C32 manualy (using CarProg EEPROM software)
    8. Save this eeprom dump (THIS ONE WILL BE UNLOCK DUMP FILE);
    9. Put dash back to car and connect via DIAG now( Load A3/TT 2009-2011 OBDII software);
    10. Press button “Load unlock dump” and load saved UNLOCK DUMP file;
    11. Load your saved backup (original eeprom) and press write;
    12. Now you can read IMMO file with button “Read immo”;
    13. Save this immo file;
    14. Load VAG KEY software;
    15. Open immo file, put transponder to the Carprog A3 antena and press write button;
    16. Choose new key possition and save new immo file;
    17. Load A3/TT 2009-2011 OBDII software;
    18. Press button “Load unlock dump” and load UNLOCK DUMP file again. Load new immo file with “Open” button.
    19. Write immo file with “Write immo” button. Write old odometer with “Change KM” button

carprog-audi-a3-2010

 

NOTE: you could change km and program new keys with CarProg original. With CarProg HQ china clone, you can change km but need luck with key programming.

 

For VAG immo, Xhorse VVDI2 is the best option.

VVDI2 VAG 5.3.0 supports Audi A3, TT, R8 dashboard Micronas CDC3217/3297+24C32

 

 

vvdi2-audi-a3-dashboard

 

 

 

http://blog.obdexpress.co.uk/2018/05/09/carprog-for-audi-...

How to use CarProg for Audi A3, TT, R8 dashboard 2010+

Here, i’d like to share a tutorial released by codecard.eu. It’s for the educational purpose only.

Car: Audi A3, TT, R8 2010+

Purpose: read/write EEPROM, change odometer, read/write immo data for key programming or dashboard cloning

Optional tools: Carprog copy version or genuine, or VVDI2 Xhorse

Tutorial:How to get CarProg to work for Audi A3, TT, R8 (2010+):

 
  • CarProg changes mileage in the car by OBDII:

Connect CarProg with A1 adapter to car OBDII.

Load A3/TT 2009-2011 OBDII software. Switch ignition ON.

Push “Prepare Unlock Dump” – odometer will be reseted to 0km.

Push “Change KM”

CarProg will show 0km

Enter new odometer value and push “OK”

Odometer correction is complete!

 

  • CarProg adds new key (if one working key exists):

connect CarProg with A1 adapter to car OBDII.

Load A3/TT 2009-2011 OBDII software.

Switch ignition ON.

Note original odometer value. Push “Prepare Unlock Dump”.

Odometer will be changed to 0km.

Swich ignition OFF.

 

  1. Remove dash from car and read EEPROM 24C32 manualy (using CarProg EEPROM software);
    2. Save this EEPROM dump;
    3. Put dash back to car and connect via OBDII again;
    4. Press button “Load unlock dump” and load saved eeprom file.
    5. Now you can read IMMO file with button “Read immo”
    6. Save this immo file;
    7. Load VAG KEY software;
    8. Open immo file, put transponder to the Carprog A3 antena and press write button;
    9. Choose new key possition and save new immo file;
    10. Load A3/TT 2009-2011 OBDII software;
    11. Press button “Load unlock dump” and load saved EEPROM file again. Load new immo file with “Open” button.
    12. Write immo file with “Write immo” button. Write old odometer with “Change KM” button
  • CarProg programs new keys when all keys are lost (IMMO IS ACTIVE):
  1. Remove dash from car and read eeprom 24C32 manualy (using CarProg EEPROM software);
    2. Save this EEPROM dump to have backup;
    3. Fill EEPROM dump range 0x812 – 0x9BF in hex editor with FF FF … ;
    4. Write this damaged dump to EEPROM;
    5. Put dash back to car and connect via OBDII again; Cluster display will show “Error”;
    6. Push “Prepare Unlock Dump”; Odometer will reset to 0km;
    7. Remove dash from car and read EEPROM again 24C32 manualy (using CarProg EEPROM software)
    8. Save this eeprom dump (THIS ONE WILL BE UNLOCK DUMP FILE);
    9. Put dash back to car and connect via DIAG now( Load A3/TT 2009-2011 OBDII software);
    10. Press button “Load unlock dump” and load saved UNLOCK DUMP file;
    11. Load your saved backup (original eeprom) and press write;
    12. Now you can read IMMO file with button “Read immo”;
    13. Save this immo file;
    14. Load VAG KEY software;
    15. Open immo file, put transponder to the Carprog A3 antena and press write button;
    16. Choose new key possition and save new immo file;
    17. Load A3/TT 2009-2011 OBDII software;
    18. Press button “Load unlock dump” and load UNLOCK DUMP file again. Load new immo file with “Open” button.
    19. Write immo file with “Write immo” button. Write old odometer with “Change KM” button

carprog-audi-a3-2010

 

NOTE: you could change km and program new keys with CarProg original. With CarProg HQ china clone, you can change km but need luck with key programming.

 

For VAG immo, Xhorse VVDI2 is the best option.

VVDI2 VAG 5.3.0 supports Audi A3, TT, R8 dashboard Micronas CDC3217/3297+24C32

 

 

vvdi2-audi-a3-dashboard

 

 

 

http://blog.obdexpress.co.uk/2018/05/09/carprog-for-audi-...

02/03/2018

Carprog v10.93 v9.31 v8.21 read/verify EEPROM 93C46: All OK!

Hi to all,

Technicians working for obdexpress.co.uk today confirmed that Carprog software v10.93 v9.31 v8.21 all car able to read/verify EEPROM 93C46.

 

Look here…

 

Carprog 10.93 reads EEPROM 93C46: success!

carprog-931-read-eeprom(1) carprog-931-read-eeprom(2) carprog-931-read-eeprom(3) carprog-931-read-eeprom(4) carprog-931-read-eeprom(5) carprog-931-read-eeprom(6)

Carprog 9.31 reads EEPROM 93C46: success!

carprog-10.93-download-install-1(1) carprog-10.93-download-install-1(2)

 

Carprog 8.21 reads EEPROM 93C46: success!

carprog-821-read-eeprom-1(1)

Note that Carprog v8.21 software is different from version 10.93 and 9.21.

Version 8.21 needs activation. (help by obdexpress.co.uk)

carprog-821-read-eeprom-1(1)

Reading EEPROM 93C46

carprog-821-read-eeprom-1(2) carprog-821-read-eeprom-1(3) carprog-821-read-eeprom-1(4) carprog-821-read-eeprom-1(5) carprog-821-read-eeprom-1(6) carprog-821-read-eeprom-1(7)

In summary, Carprog v10.93 v9.31 v8.21 all can read and verify 93C46.

BTY,the installtion video:

How to Install Carprog V10.93 software(SE53)

How to Install Carprog V10.93 Online Version Firmware on Win 7(SE53-B)