topblog Ivoire blogs

12/02/2016

Digiprog 3 Odometer Programmer error solution

After i use this digiprog 3 several time, today when i power on the machine, it gives me prompt like this: "INFORMATION: This equipment is intended for repair purposes only! Adjusting the speedometer on any vehicle which intent to defraut is a serious criminal offence, which normally carries a custodial sentence."

digiprog3-odometer-programmer-s0-1.jpg

Solution: This one is the normal prompt. Click the √, and input password 1, then go on to use it as before.

More information:http://www.obdexpress.co.uk/wholesale/main-unit-digiprog3...

09:02 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

11/02/2016

Scania SDP3 2.24 (Fix) Free Download

Scania Diagnos & Programmer 3 SDP3 2.24 and SDP3 Fix files free download here.

Free download SDP3 files:
SDP3 2.24.1
https://mega.nz/#!EQ1ShIyR!eg2987wBD4xMl29FNqMYmWD97PYjPf...
Fix Scania SDP3 2.24 
https://mega.nz/#!P4JSzShL!sL7D_ID9xGVtlyQwCSJzwHb5junpKd...

Operation system:
WIN 7 32bit only

Multi-language: 
English/ German/ Spanish/ French/ Japanese/ Dutch/ Polish/ Portuguese/ Swedish/ Norwegian/ Suomi/ Turkish/ Italian/ Czech/ Russian/ Chinese.

Compatible devices:
Scania truck diagnostic tool:
VCI 2

vci 2.jpg
VCI 3

vci 3.jpg
Why to get SDP3 2.24.1?
Problems solved with this extra release
Solved the following FQ items:
FQIT241264
Not able to see guide Cylinder output test in SDP3, affected products all EMS S6.
FQIT241255
Not possible to access adjustable parameters in ELC4 due to a faulty parameter settings
module in SDP3. For instance Lowering the tag axle. Affected vehicles PGR-trucks and FKNbus with ELC4
FQIT242105
Not possible to spare part program new ECU EMS S7 replacement.

How to install Scania VCI 2 SDP3 V2.24 in Win 7?
http://blog.obdexpress.co.uk/2016/01/20/install-sdp3-v2-2...

What can you do with SDP3 2.24 with VCI 2 / VCI 3?
Stored fault codes, proposals for remedial action and delete option.
Control unit configuration and settings.
Information about electrical components and their location.
Input and output signals.
Activation of components.
Spare part programming.
Circuit diagrams. For each circuit there is a diagram which clearly shows how the particular circuit is implemented in the respective vehicle.
Chassis data. The vehicle gives the program a description of itself and how it is configured.
User functions. In order to meet service market requirements to work more effectively, there is an option to troubleshoot via user functions, e.g. cruise control.

12:26 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

10/02/2016

MB SD Connect Compact 4 activation and Installation FAQ

MB SD Connect Compact 4 Star Diagnosis Wireless Latest Version supports K line, CAN BUS and UDS protocol. MB SD C4 can reading and erasing trouble code, reading the real-time data of sensor and actuator, coding and programming,also support Multi-language.

Here is MB SD Connect Compact 4 activation and Installation FAQ

About MB SD Installation

Q: I got this error reading " A disk read error occurred, Press Ctrl+Alt+Del to restart" after I insert the hard disk of SD Compact 4 into the computer.

A: the hard disk has a poor connection with the computer or the hard disk is broken.

Q: MB SD C4 has error after click "Select MUX", Status "No Signal".

A: Please connect to "Local area connection", and set IP address: 172.29.127.114, Subnet mask: 255.255.0.0. for the details, please watch the video tutorial by clicking https://youtu.be/_7HJeT63VLQ.

Q: How to install MB SD connect c4 starfinder?

A: it doesn't need to install starfinder, directly open "c:program filesweb_etmindex.html ".

Q: My moveable hard disk of MB SD connect C4 has no display. Does it use USB cable to connect the hard disk and then active?

A: Yes, use USB cable to connect the moveable hard disk and the computer, firstly install "setup.exe", and then import Mercedes Benz software, the computer configuration should not be too low.

Q: After I connect MB SD C4 to the car, SD C4 has no voltage on the PIN8 OBD cable, but when the ignition key on the second position, the PIN8 cable voltage is 12V. What's the problem?

A: It suggests you don't start the car, after the car start, the PIN8 will display voltage value.

Q: Working with SP100, I wanted to change the way fuel consumption is calculated in the KIW module. This is done in option 1772 of KIW, only adaptable with the developer version of DAS (see FOTO.JPG). Since when starting I have to agree to the special "dangers" the developer version implements, I thought I would be able to change that value. But there is no modify option available

A: the way of fuel consumption cannot be changed; you are allowed to choose option 1772 of KIW.

Q: Xentrty error reading "Internal error: (3.17)-3.173 you must contact the User Help Desk"

A: Don't set the file "lic-key-2" as read only.

About MB SD Activation

Q: when I setup SD connect compact 4 hard disk; I got a message reading "No access authorization code! Please contact the Star diagnosis call center".

A: It needs activation, please send us Hardware fingerprint, LAN-ID and HW-ID, then we will help you active. As for how to get Hardware fingerprint, LAN-ID and HW-ID, please refer to this file:

Q: When I open EPC of MB SD C4 (SP100), I got error message "unable to start application program", what's the reason?

A: Firstly, make sure EPC is activated. Secondly, make sure enter EPC from "EPC NET EXPLORER " and find out LAN ID, finally active it. (A part of users tend to directly start EPC from Xentrty, this is not correct.) Still have got the same error? Please contact us for remote assistance.

Q: After I get MB SD connect c4 activation file, I have no idea how to use it, active by star utilities or by EWA NET?

A: We have video tutorial, please click https://youtu.be/Qg3STy24Pmc to watch. Important note: make sure enter EPC from "EPC NET EXPLORER" and find out LAN ID, finally active it.

Q: I insert the DELL D630 hard disk of MB STAR compact C4 into the computer and then turn on the computer; it asked me for administrator code, what is this code?

A: This administrator code is: User$star2004

12:24 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)