topblog Ivoire blogs

23/03/2016

VVDI Prog Programmer 4.4.0 Test Results from Customers

The is customer feedback collections of VVDI Prog Programmer (2.2.0-4.4.0) at OBDexpress.

vvdi-prog-package.jpg

Feedback on http://www.obdexpress.co.uk/wholesale/vvdi-prog-vvdi-prog...

VVDI Prog 4.4.0 on BMW cars
Cas 3 0L15Y read/write eep+flash ok
Cas 3+ 0M23S read/write eep+flash ok
Cas 2 2K79X read/write eep+flash ok
Program BMW CAS4+ All Key Lost...test ok
Read BMW CAS2, CAS3, CAS3+ and CAS4 ECU...test ok
Read BMW Engine ECU ISN...test ok
read out BMW 5 series CAS data
adds BMW CAS4 key
Can't find a way to read Cas 1 for E65 mask 0K50E

VVDI Prog on Mercedes Benz
W211 ezs 4L40K read/write eep+flash ok

VVDI PROG programmer 4.1.4 on Great Wall, Delphi
Read Great Wall Delphi EEPROM 93C66...test ok
Read 5M48H and common 8pin IC...test ok

VVDI Prog 2.2.0 on VW
The programmer read VW 44 IC EEPROM
Calculate password

VVDI Prog on MCU Motorola 912Xd256
MCU Motorola 912Xd256 unsecured it
read ok
eeprom and flash write ok
wont write new data on
always says erase error
eeprom flash not

VVDI Prog get PIN code of Ford, Nissan, Hyundai, VW
Ford password calculation (get Incode with Outcode)

vvdi-prog -4.4-get-pin-code (1).jpg
calculate Nissan 20 digital PIN code

vvdi-prog -4.4-get-pin-code (2).jpg
Calculate Hyundai PIN code by VIN

vvdi-prog -4.4-get-pin-code (3).jpg
Load data to calculate VW PIN

vvdi-prog -4.4-get-pin-code (4).jpg

04:44 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

22/03/2016

E-SYS changes manufacturing date to recode BMW module

As we all know, Zeitkriterium or manufacturing date is an important part of most retrofits that enables the use of Esys interface to recode a BMW module in order to activate the retrofit. And here, obdexpress guides you to change zeitkriterium or manufacturing date.

ENET-CABLE.jpg
For example, some F10 models came with halogen lights and most owners want to retrofit the LCI xenon headlights for better looks and visibility. The DRL is also very weak on halogen headlights and that ruins the way the car looks compared to the xenon equipped ones.

In this tutorial, we will show you how to do it step by step.

Connect to E-sys cable and choose your chassis

esys-change-manufaturing-date (1).jpg
Read FA and activate FA

esys-change-manufaturing-date (2).jpg
Click on Save and give the file any name you wish, then click on Edit. Right click on the FA and click Calculate FP.

esys-change-manufaturing-date (3).jpg
Edit the Zeitkriterium value accordingly to your needs

esys-change-manufaturing-date (4).jpg
Calculate FP again then save

esys-change-manufaturing-date (5).jpg
Go to the VCM tab, load the file and calculate FP again

esys-change-manufaturing-date (6).jpg
Select VCM Master and Write FA FP

esys-change-manufaturing-date (7).jpg
Now that the FA FP has been written to the car you can go ahead and recode your module by going back to the Expert Mode Coding tab, Read SVT to see the modules list, right click on the module name (Ex: FRM) and click on “Code”.
Wait for the process to finish and you`re done!

07:11 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

21/03/2016

Tech 2 TIS2000 Cannot Connect with Error 666 (SOLVED)

Tried to do SPS/TIS programming, etc. with my GM Tech 2 scanner. But I cant get it to work when i connected to my PC with windows XP system! Stupid serial ports, I don’t know why GM has not made the Tech 2 USB yet. Most computers don’t even come with legacy ports anymore.

It’s almost as if the Tech 2 knows the PC is there, but the PC doesn’t know the Tech 2 is there. Because when I plug it in and turn on the Tech 2, it says "waiting for download" for a second on the tech 2 screen. When I try to connect with the PC, it hangs for a second then says "cannot connect".

Surfed the Internet and read many posts.

And finally found that there is a setting that is kind of hard to find that will set COM port.

It's under CONFIGURATION>I/O MANAGEMENT>TECH2>PROPERTIES.

Normal TIS2000 software that comes with it requires a USB security dongle. Go figure. TIS2000 is COM yet the security is USB. This REALLY screws up things sometimes.

If you do need the dongle and don't have one, it will error with:

E666: Access to Service Programming Server was denied.

tech2-tis200-error-E666-1.jpg

tech2-tis200-error-E666-2.jpg

I happened to meet with this issue before. This can also mean it doesn't "see" the dongle, and you forgot to install the dongle driver.

06:54 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)