topblog Ivoire blogs

16/05/2016

Review on Foxwell NT510 Multi-system Scanner

Here I want to share a wonderful online shopping experience because of the patient service and cost-effective product, foxwell NT510 multi-system scanner.

I possessed a small workshop and I usually fixed and sold cars I was familiar with. I mainly worked on Chrysler, vw/Audi, BMW, Ford, and GM. Several days ago, I wanted to look for a scanner which supports full functions for some specific car models. My friend online introduced Nt510 supported my vehicles including Chrysler, VW, BMW. I also had a US made Ford F250 Pickup Truck. It seemed that NT510 did not support ford. So I asked the customer service of shop online if there was better products for me to scan and program features for Chrysler, VW ,BMW and Ford. Besides, if I bought a car brand for NT510, could I full access to all computer features of that vehicle and beyond my basic OBDII readout, such as SRS, ABS, Airbags, etc?

The customer service brought good news for me that their factory just released American ford software the day before yesterday. What a coincidence! I could order it and choose American ford software, but I had to pay for the additional software for Chrysler. After negotiation, I purchased the Chrysler NT510 and paid 60$ to have both the GM and Ford software added to the device I purchased (originally cost 200$).

After 3 days delivery, I received my package without damage. There was a scan tool, a user guide, a memory card, a USB cable, a CD software and a nylon carry pouch in the package. They provided me free update online before delivery.

foxwell-nt500-package.jpg
I tested the function of programming control modules I desired with foxwell NT510 as soon as possible successfully. The only regret was that the NT510 could not disable features like seat belt warning chimes and lights, which was my additional requirement. Even so, I was still satisfied with this shopping experience so much .

05:57 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

13/05/2016

How to diagnose Mercedes Benz W211 with jDiag Elite J2534

This post mainly display how to step-by-step diagnose Mercedes Benz W211 with Jdiag Elite J2534.

What is Jdiag Elite J2534?
JDiag Elite J2534 made by JDiag Inc is a diagnostic and coding programming Tool, it is the new generation J2534 tool. It can perform module programming, diagnostic functions, key programming and data monitoring. It is built with JDiag Tablet touch screen. It features in the  pre-installed software and free update for life time. It is compatible with 3 optional operation systems including WIN7,64Bit; WIN8.1,64Bit, and when you turn on the PC, you are supposed to choose a system and all are preinstalled.

To check the similarities and differences among JDiag Elite J2534 and other multi-brand diagnostic programming tools e.g AUTOBOSS V30 ELITE, LAUNCH X431 V and Autel MaxiSys Pro MS908P, browse:
http://www.obdexpress.co.uk/upload/pro/jdiag-comparison-o...

jdiag-elite-diagnostic-and-coding-programming-tool-n8.jpg
Step-by-step to diagnose Benz E-class/CLS W211 with JDiag Elite J2534:
1. Open DAS/Xentry

das xentry-01.jpg
2. Connect USB cable to laptop, OBDII cable to car OBDII port.
3. Switch the ignition on
4. Go to test it, details as follows.

5. Press "F2", Data are being determined, please wait.
Select "Cars", click "F2"

cars-02.jpg
6. Select "E-class/CLS"

e class-03.jpg
7. Select W211

211-04.jpg
8.Wait...it will automatically inititializing, checking....

9. Select "Control units", data are being determined, please wait...

Control units-05.jpg
10. Select "Drive"

drive-06.jpg
11. select ME-SF 2/8-Motor electronics 2.8-07, communication with the control module group gasoline engine is being established.

Select ME-SF 2 8-Motor electronics 2.8-07.jpg
12. I herewith confirm that I have read the safety notes

I herewith confirm that I have read the safety notes-08.jpg
13. Select "control unit version"

control unit version-09.jpg
14. Select "Vatual values"

Vatual values-10.jpg

Vatual values-11.jpg
15. Select "preconditions for test"

preconditions for test-12.jpg
16. Check engine at cold start and in warmng-up phase

 

check engine at cold start and in warmng-up phase-13

http://www.mileageprogrammer.com/

08:14 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

12/05/2016

How to make key for Mazda 6 2013 using OBDSTAR F-100

This post step-by-step shows how to make new key for Mazda 6 2013 using OBDSTAR F-100, according the following parts, you will find it is very easy to use F100 key programmer, since the machine will display the instruction to guide you how to do next.

Car model:
Mazda 6 2013

Mazda key programmer to use:
OBDSTAR F-100 key programmer

It is very easy to operate by following next instruction:
Get on the car Mazda 6 2013, this is Mazda 6 key

OBDSTAR F-100 key programmer-1.jpg

OBDSTAR F-100 key programmer-2.jpg
Press the lock and unlock buttons of the following right key.

OBDSTAR F-100 key programmer-3.jpg
Connect OBDSTAR F100 key pro to the device and open it, you will find it can automatically read out Mazda V30.15.

OBDSTAR F-100 key programmer-4.jpg
Then loading…initializing..Authorizing
Select Atenza.

OBDSTAR F-100 key programmer-5.jpg
With smart

OBDSTAR F-100 key programmer-6.jpg
Get message reading "All smart keys lost, add smart key, switch ignition on". Then select "Switch ignition on ".
Then get another message reading "All the smart key out of the car 1 meters away. " Then you should take the two smart keys out of the car 1 meter away.
Communication….
Then get prompt reading "Press and hold the vehicle start button for 10 seconds, Start button indicator li-"

OBDSTAR F-100 key programmer-7.jpg
(Press and hold the stat button till it turn red)

OBDSTAR F-100 key programmer-8.jpg
Back to the options "All smart keys lost, add smart key, switch ignition on", and select "All smart keys lost" then get instruction "All smart keys will be erased. Min keys are required". Press ENTER to continue, press ESC to return.
Then "Switch ignition on"
Get prompt "Current number of smart keys: 2. Press ENTER to continue, press ESC to return.
Configuring the system, please wait..
Reading vehicles information…
Ignition switch status is open? Click F100 button "ESC", and according to the prompt to press and hold the vehicle start button for 10 seconds, Start button indicator light from green to yellow, Press the start button again, instrument to open.

Then configuration system…
Get message "Current number smart keys:0"

Erase complete
Take the keys back to the car.
Configuring the system, please wait…
Switch ignition off..
Switch ignition on.
Use a new smart key to contact start button, press Enter to continue.
After configuring the system, it will read out current number of smart keys is 1.
Program successfully.

To program next one, press ENTER to continue.
Turn off ignition-configuring the system- turn on ignition.
Use a new smart key to contact start button, press Enter to continue.
After configuring the system, it will read out current number of smart keys are 2.
Program successfully.

Press ESC to exist. Then get prompt reading "You have to complete the following procedures, engine can be started"
1.Switch ignition off.
2.Put on the brakes, the key 1 press start button to start the engine for 1 second, then turn off the ignition switch.
3.If you want to add more keys, please repeat procedure 2 , complete.
Test the new key, it is working.

10:46 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)