topblog Ivoire blogs

22/03/2017

Skoda Rapid 2016 steering angle learning with Launch X431 V 8 inch

Here is my experience of using Launch X431 V 8 inch tablet ,

I have fun with it,I use it to steer angle learning and 

calibration on my 2016 Skoda Rapid,Put it here and wish 

it helps.

 

Purpose:

steering angle learning/calibration

 

Car:

Skoda Rapid 2016

 

Tool i used:

My new-coming scan tool: Launch X431 V 8 inch tablet

 

 

 

 

 

 

 

 

 

 

Background information:

SAS, steering angle sensor is a significant element of the ESC system which control the steering wheel position angle and rate of turn. To keep it easy, the steering in a car or other vehicle is the mechanical parts of it which make it possible to steer. The SAS is located in a sensor cluster in the steering column. The cluster normally is compatible with more than one steering position sensor for confirming data. The ESC module has to receive two signals to confirm the steering wheel position. These signals are often out of phase with each other.

 

Steering Angle Calibration though Launch X431V:

  1. To reset the steering angle, first find the relative zero point position for the car

to drive in straight line. Taking this position as reference, the ECU can

calculate the accurate angle for left and right steering.

  1. After replacing the steering angle position sensor, replacing steering

mechanical parts (such as steering gearbox, steering column, end tie rod,

steering knuckle), performing four-wheel alignment, or recovering car body,

you must reset the steering angle.

 

How to do a steering angle learning with 2017 launch x431 v scan tool:

Go to launch x431 v app

LAUNCH-x431-v8-inch-app

 

Register an account and download VW software

 

LAUNCH-x431-v-8-inch-software-download-update-(1)

 

LAUNCH-x431-v-8-inch-software-download-update-(2

new-launch-x431-v-skoda-2016-(3)

 

Then special functions for steering angle learning

  

new-launch-x431-v-skoda-2016-(10)

 

new-launch-x431-v-skoda-2016-(11

 

new-launch-x431-v-skoda-2016-(12

steps as the tablet displays:

1 start the vehicle

2 drive in a short distance straight line on a level surface at a speed not higher than 20km/h

3 while driving turn the steering wheel one turn to the right and one turn to the left

4 when having the steering wheel straight again stop the vehicle with the wheel’s pointed straight

5 ensure that the steering wheel is not moved again

6 keep the engine running and do not switch off the ignition

7 system voltage at least 12.0v

 

 

Result: OK!

 

 

 

 

 

20/03/2017

Renault CAN CLIP V166 Free Download

Renault CAN CLIP V166 software is working now? Free download CAN CLIP V166 for Renault on Mega and try on your own risk:
 
So can you use CLIP V166 safely?
NO! Have better not.
 
Can clip v166 download links are shared individually in some communities like forum.
No tested by professionals yet. but our engineers are testing now… wait for the result if you wanna the newest CLIP software.
 
For sake of SECURITY, go for a tested version of Renault can clip diagnostic software. Here you go…
Post: Renault Can CLIP V165 Test Report
 Renault Can CLIP V165 (1)

 

 Renault Can CLIP V165 (2)
 
Source: Renault Can CLIP V165 software
http://www.obd2express.co.uk/wholesale/cd-software-for-renault-can-clip-v139-14609.html
 
Note: CLIP V165 is a crack version, tested to work 100% with renault can clip diagnostic interface china clone:
Four versions available: cheapest, best-quality, good quality, most populous
Renault CLIP buying guide:
http://obd2-diag.blogspot.com/2016/12/how-to-choose-renault-can-clip.html
 
best-quality CAN CLIP chips without communication issues:
 
most populous Renault CAN CLIP in U.K.:
 
It’s necessary to get the details if you wanna buy a working renault can clip diagnostic tool from china.
 
Source:http://blog.obd2express.co.uk/2017/03/20/download-renault-can-clip-v166/
 
www.golotool.com

18/03/2017

New Genius Windows 7 XP Videos

Here, you will get the step-by-step instruction on

how to install New Genius software clone on Windows XP/ Windows 7 system,

how to use K-touch read write ECU data,

how to reset New Genius TF card when TF files fail to work

 

How to Install New Genius Software on Windows 7:

How to Install New Genius K Touch on Windows XP :

How to use New Genius clone to Read and Write K Touch Data:

How to reset New Genius TF card when TF files fail to work:

 

 

you can read / program the ECU in modern vehicles over OBD2. It is able to work without connection to a computer during the critical phases of reading and writing of the ECU, ensuring the process is executed in complete safety. As a completely independent tool, the risks of working with a PC can be avoided, risks such as stalling, Windows crashes, power failure etc…

 

clone New Genius review…here you go

have tested it ok to read/write ECU on vehicles:

2014 Ford Fiesta Ecoboost 1.0 125hp auto

2013 Mitsubishi ASX/Outlander Sport 2.0 4B11 CVT

2014 Chevrolet Orlando 1.8 Petrol Auto

2015 Mitsubishi Montero Sport/Pajero Sport 2.5DiD 178hp auto

Opel Zafira , Combo , Meriva Denso

Mercedes EDC16C2 ID