topblog Ivoire blogs

25/04/2017

How to install Vag can pro VCP+K v5.5.1

OBDexpress had cracked the VAG PRO v5.5.1 software ,Here is the Free download VAG CAN PRO v5.5.1 patch on Mega:

https://mega.nz/#!zFgQgCbB!rOdRRC2W00u8Ribmbxz7zqiVrfDMvq...

crack

no password required

without USB dongle

never expired

Windows XP, Windows 7.. all OK

 

Then, How to install VAG CAN PRO 5.5.1 crack on Windows xp

 

Open disk E: VCP6

Copy folder Driver VCP

Paste it on Desktop

Open folder vcp6 and unzip

 

Open vagcanpro properties

Find target:

Open sp275 patch on Desktop

Copy PSA.dll & SCard.dll

Replace files with the 2 application on C:VCP6

 

This wizard helps you install software for FT245R USB FIF0

Select: Install from a list or specific location (Advanced)

Click on Next

Select: Include this location in the search

Browse: Desktop/Driver VCP

Next

Finish installation of USB Serial Converter

vag-can-pro-5.5.1-crack-download-1

This wizard helps you install software for USB Serial Port

Select: Install from a list or specific location (Advanced)

Click on Next

Next

Finish installation of USB Serial Port

vag-can-pro-5.5.1-crack-download-2

Connect the vag can pro cable for use

Open vagcanpro on Desktop

softwere-vag-can-pro-5.5.1-crack-download-3

It’s VCP+K v5.5.1 2016 version

softwere-vag-can-pro-5.5.1-crack-download-4

Go to diagnosis, (better than VAS 5054A-vag pro runs FASTER than 5054a)

Can coding and programming

softwere-vag-can-pro-5.5.1-crack-download-5 softwere-vag-can-pro-5.5.1-crack-download-6

NO need engineer codes for coding or programming

http://blog.obdexpress.co.uk/2017/04/25/vag-can-pro-vcpk-...

13/04/2017

(€210 saved)Allscanner VXDIAG A3 = ICOM A2 + 5054A odis + JLR SDD v148

€210 saved to get the new Allscanner VXDIAG A3 scan tool can be used as a full diagnostic & programming tool for BMW, Volkswagen, Audi, Skoda, Bentley, Lamborghini , LAND ROVER &JAGUAR.

ALLSCANNER VXDIAG A3 Support BMW LAND ROVER & JAGUAR and VW with 500GB Hard Drive

 

 

 

 

 

 

So, SAVED €210.99 with a VXDIAG A3 diagnostic tool!

 

Here comes the question.

 

Can VXDIAG A3 can perform as well as ICOM A2, Vxdiag vcx nano 5054 & JLR SDD 145? No issues in basic diagnostic test, coding, ecu programming and key programming?

 

Yes! Vxdiag A3 can perform diagnostic test (read live data stream, fault codes..), actuation test, monitoring, utility testing,reprogramming, ecu programming, coding, key programming, though USB/ WIFI / wired cable, in multilanguage: English / Japanese / Portuguese / Romanian / Korean / Dutch / Polish / Turkish / Spanish / French / Italian / Croatian / Danish / German / Swedish / Finnish / Slovenian / Czech / Russian / Greek / Chinese

 

 

 

  1. VXDIAG A3 for BMW

The new BMW software can perform programming and coding for all BMW E/ F/ G series cars, same as BMW ICOM A1 / A2 / A3. Very good at fiber programming.

 

The main diagnostic software includes:

Diagnosis: ISTA-D v40.01.21

Programming: ISTA-P v3.59.4.004

BMW Group ISPI (the fourth generation of BMW diagnostic software client);

E-SYS (Engineer Software for F series, available for programming, coding, Chinesization, realize hidden functions, advanced features);

WINKFP (for E series: programming, upgrade and downgrade);

Tool32 (enter key, import codes, delete certification, advanced features of BMW series);

INPA (read vehicle information, diagnosis, read and clear trouble codes);

BMW Coding (for E series: import data, change the code or realize hidden functions);

KSD2 (offer full vehicle repairing information for diagnosis or programming);

NCS-Expert tool (for E series: set codes, realize hidden functions and change settings);

BMW software includes the engineer version, which is the quick and easy diagnostic programming and coding system that German BMW engineers are using. The system is designed in English and German. The Engineer version is so practical and powerful that it can achieve professional features which all the original professional computers can realize, can change the language into Chinese through the OBD port for import cars (Europe regulation cars, the United States and the United States, Africa, etc.). Features mainly include: diagnosis, programming (incl. programming one module only), coding, realize hidden function, new features activation, the module system update.

 

Following functions can be activated based on the existing configuration model:

01 use the button in the cab to close the trunk (electric tailgate), to terminate the reverse operation at any time (available in cars with the electric tailgate)

02 activate the Bluetooth phone function, to automatically play the music inside the phone every time you start the car. (Available in models with a USB port in the armrest box or gear)

03 support audio and video playback via USB cable as well as via iPod.

04 connect to the phone through the Wi-Fi (mobile phones are required to install software)

05 open the voice recognition function (currently only available in English digital telephone dialing)

06 operate the navigation menu when driving, watch DVD (Even the original car is available with CD, you can also watch DVD)

07 Active internet applications (available in post 2012.09 models with professional navigation, but some unsupported with unclear reasons)

08 immediately fold the rear-view mirror with the remote control (for the original car, owners need to press the lock key for 1.5 seconds)

09 activate gearbox program on the sport cars, at a quicker response for speeding up. But it will cause fault codes in ECU test in the 4S shop. (NOT recommended)

10 effectively prevent rear-end collision because brake lights flash quickly when braking severely (for 3 Series 5 Series, testing)

11 use mobile phone traffic to surf the Internet on iDrive via the phone Bluetooth (not tested yet)

12 adjust the warning speed of changing a lane (available in high-end cars with the rearview mirror with the dead angle warning indicator) (not tested yet)

13 automatically released the handbrake (parking button) when the vehicle is started (testing)

14 add the lane departure system and roadside warning identification function (available in optional cars with front cameras) (not tested yet)

15 L7 around Sound Pro

Personalized Customization

  1. Set Seat Belt Alarm time (second/sec)
  2. Disable passenger Seat Belt Alarm
  3. Disable driver Seat Belt Alarm
  4. Set the engine on/off status the same as that before the ignition off or the default status off.
  5. Set the central lock automatically unlock when ignition off
  6. Set Fuel Economy Mode as default mode after ignition on
  7. Enable roll up window when open car door
  8. Enable the option of DRL (Day Running Lights) on or off.
  9. Set Highlight auxiliary and intersection traffic light “Automatic”
  10.  Enable to adjust DRL brightness (the default factory setting is brightest)
  11.  Set fog light turn on while headlight is on
  12. Enable to Lock/Unlock sound  and adjust the volume
  13.  Enable auto close sunroof when raining (May lead to initialize sunroof, it will work only after ignition on for 10 seconds, not very effective.)
  14.  Set windshield wiper Back in place when ignition off
  15. Set sunroof automatically close in a tilted state (It needs to initialize sunroof)
  16. Set the turn signal light on/off times (F30)
  17.  Enable CIC menu display CI version
  18.  Three Bluetooth phone rings available
  19.  Enlarge phone number and text storage (25 to 50)

 

A/C (Automatic Air Conditioning)

20.  Set indoor internal circulation memory the same as that when the ignition off last time.

  1. Set air conditioning memory the same as that when ignition off last time.
  2.  Display engine output power and torque on navigation screen
  3.  Cancel home screen boot delay confirm message
  4.  Cancel rear view camera statement when reversing
  5.  Display available gas station on navigation
  6. Display speed limit info (Need hardware support)
  7. Display engine torque menu
  8. Auto headlight
  9. TPMS
  10. Display tire pressure and temperature (Need hardware support)
  11. Adjust mile to kilometer
  12. GPS time synchronization
  13. Dashboard stimulate instant fuel consumption: change from 20 to 30
  14. Enable dashboard light on always
  15. Enable dashboard light always on at night (For BMW 535, GT, 7 series and part of BMW 530)
  16. Enable dashboard light always on at daytime (For BMW 535, GT, 7 series and part of BMW 530)
  17. Enable dashboard lights turn grey (For BMW 535, GT, 7 series and part of BMW 530)
  18. Enable dashboard lights turn orange or grey (For BMW 535, GT, 7 series and part of BMW 530)
  19. DS Mode display current shift from S1 to S7
  20. Set Head-Up Display (Navigation map distance and turn signal, etc.) (Need hardware support)

42 PDC reversing radar is changed vertically and horizontally

 

 

 

  1. Vxdiag A3 for LAND ROVER &JAGUAR JLR SDD148

 

The newest JLR IDS V148 can perform online programming ecu, diagnosis test and programming key with Incode, Chinese localization, etc.

 

For the 2014 Range Rover Executive Edition and new Range Rover Sports, since the communication protocol was changed, only ALLSCANNER VXDIAG A3 is verified to be able to diagnose. JLR Mangoose cable can’t cover any longer, if JLR Mangoose cable is plugged into the vehicle, all the dashboard warning lights will be on and lead to the vehicle malfunction; VCM can’t cover neither, although it can cover the newer Jaguar and Land Rover.

 

 

 

  1. Vxdiag A3 for VW 

VW function:

Support obdii diagnostics, ecu programming, offline flash, key programming

Support the ODIS 3.1.0 software and UDS protocol.

Support Volkswagen, Audi, Skoda, Bentley, Lamborghini

 

ODIS language available:

English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/French/Italian/Croatian/Danish/German/Swedish/Finnish/Slovenian/Czech/Russian/Greek/Chinese

 

System Requirements: Dual-core processor, better above I5; over 4G of memory

Bus protocol: 

  1. J1850PWM / SCP
  2. ISO9141 / KWP2000
  3. ROSCO
  4. Medium Speed CAN
  5. CAN Bus (capable of ISO 15765, GMLAN, and ISO14229)

 

http://vxdiagtool.blogspot.com/2017/04/210-savedallscanne...

Switch-mode K+DCAN cable manual: a lot of reviews of DCAN USB interface

How to use/switch/connect to K-Line or Dcan pin 7&8? I have one of those K+DCAN USB cables and I am confused about how to switch the modes of it. Here are good tips i found, of the switch-mode k+dcan usb cable user manual. All i’ve collected just for education.

 

 

About the switch-mode K+DCAN interface

I assume the reasons being that on DCAN cars one pin is used for a ethernet connection and the other to the K data line – on K line cars, both pins are connected to K data lines and that creating a switch mode circuit would cost more than the interface is worth. The 2 most sensible options are both hardware-related:-

  1. Use an adapter (such as the one sold by One Stop electronics) which internally bridges pins 7 & 8 or,
  2. Mount a small switch on the OBD plug end of your adapter, which can bridge (for K line) or separate (for DCAN) the connection between pins 7 & 8.

 

Tip: the normal dcan cable vs. switch-mode k+dcan cable:
http://blog.obdexpress.co.uk/2016/04/27/2016-new-bmw-kdca...

 

 

 

– So you have to physically connect (K-Line) or disconnect (DCAN) pin 7&8?

– Yes, I think connection by soldering is a bad option as it limits the usefulness of the interface, I have an adapter but consider a switch to be a better option.

 

 

– Is there anything else to do for switching from K-Line to DCAN then disconnecting pin 7&8? Unfortunately I don’t have a DCAN model available.

– As soon as you connect the interface to the car and your computer, run DCAN.exe to configure the comms rate. I have only used my K+DCAN interface with DCAN cars.

 

 

– Is it necessary to do so every time I want to use DCAN or is the interface staying in DCAN mode once I ran DCAN.exe?

– You only need to run it when you are switching between modes. If you run it the first time you connect to a DCAN car, your computer will retain the settings.

 

 

– How do I switch back to K-Line? Just by connecting the two pins or is further action on the computer required?

– Earlier e39 had both the OBD port in the cabin and the round 20 pin connector under the hood.

 

The OBD port only allowed access to limited modules, I think only the DME in fact.

 

I always switch my K+D CAN adapter between K and D CAN protocols as I need to, depending on the car that I’m connecting to.

I use the DOS version of the DCAN utility. As mentioned if you only use the adapter on the e39, run the utility once and set the adapter to K CAN and leave it at that.

 

In fact thinking about it I use the same adapter for INPA, DIS and ISID.

 

With these K DCAN cables there are two subtle different versions, one with pin 8 enabled, one with it disabled. The one with it disabled is ideal for e90 newer than 03/07 & that era, these leads often come with a black adapter to re-enable the pin 8 (by just tying it to pin 9) so it will also be suitable for e46/e39/e63 etc. The ones with pin 8 active are just older versions of the cable. Worst cast scenario you just need to modify the cable & stuck a switch on it to toggle pin 8 on/off as needed.

 

Finally there are a lot of rubbish adapter cables out there. Finding a good one can be tricky.

 

 

– I have a 2003 E39 so there is no OBD1 anymore. How do you switch the modes physically? Do you use such a adapter to connect Pin 7&8?

– If you don‘t plan to use the cable on any cars that have DCAN(2007+) then you can pop open the case and solder a jumper between them. When you do this the DCAN functionality will no longer work though.

http://blog.obdexpress.co.uk/2017/04/13/switch-mode-kdcan...

page, enter the dealer to the account and password;

how-to-use-allscanner-cloud-diagnostic8how-to-use-allscanner-cloud-diagnostic9

 

4.Select the required models in the main interface Icon;

 

how-to-use-allscanner-cloud-diagnostic10

Select "Open Cloud diagnostics" and enter the cloud server(Note: to enter the cloud server must be connected to the device);

how-to-use-allscanner-cloud-diagnostic11

 

how-to-use-allscanner-cloud-diagnostic12how-to-use-allscanner-cloud-diagnostic13

 

how-to-use-allscanner-cloud-diagnostic14how-to-use-allscanner-cloud-diagnostic15

5.Open diagnostic software for vehicle diagnosis。

 

how-to-use-allscanner-cloud-diagnostic16 how-to-use-allscanner-cloud-diagnostic17

how-to-use-allscanner-cloud-diagnostic18

Related Information:http://www.vxdiag.net/

Allscanner Cloud diagnostics user manual PDF

 

http://blog.obdexpress.co.uk/2016/10/14/allscanner-cloud-...