topblog Ivoire blogs


Lexia 3 PP2000 Diagbox with original 921815C works on 407/C5

Some Lexia 3/XS Evolution diagnostic interface owners reported that normal lexia-3 PP2000 V25 Diagbox V7.57 can not work on Peugeot 407, but better quality lexia3 firmware are possible to access even Pug407 till 2014 year. has several lexia cables in stock. Item No SP08-C is the best quality with original 921815C chip that works on Peugeot 407 and Citroen C5. 


If you want to get real picky and go for best quality chips and check for NEC chips exactly like ours:


Best quality LEXIA 3 V48 PP2000 V25 Diagbox V7.57 with original 921815C chip PCB board:









PS: Different Lexia 3 PP2000 Diagbox comparison table list:


08:18 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Read vehicle wiring diagrams with Multi-diag J2534 Pass-Thru

Multi-Diag access J2534 Pass-thru is able to access wiring diagrams for multi-brand foreign and domestic cars, trucks, Van engines (diesel, gasoline, flexfuel etc) through years 1996-2014. The wiring diagram is easy to read detail with symbol description. It is extremely helpful for those who want to trace down circuit, radio diagram, A / C circuit, engine wiring etc.


How to read vehicle's wiring diagram with Multi-Di @ g Access J2534 pass-thru?

Follow the instruction:

Well install ACTIA Multi-diag J2534 software (current software 2014.01V / Ⅰ-2014)

Connect the Multi-diag J2435 interface with vehicle via OBD socket

Start using the Multi-diag software, select vehicle model, year etc, then come to Technical information program

Press theactia-multi-diag-j2534-wiring-diagram-0.jpgbutton and select vehicle cylinder number, the Multidiag software will display wiring diagram


Click on the "?" Icon to get a description of symbols


Hover the mouse over the diagram to view additional comments and notes where available.




07:50 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Corolla 2012 G type add key


I did many Corolla G type before and always success to add a key on corolla 2011-2012 and it allways gscan asked for any working key, but now i get error "not a master key".


Optional solution one:

Add key no need immobox if u have Toyota Techstream, try using Techstream is better than x100. 

Techstream can't reset immo. 


When you get error "not a master key", try to read pg1 and see. 

You need master key, you can check it by insert key in switch ,if immo light goes immediately its master , if not its valid and need to get immo out.


Optional solution two:

I have done many of these Toyota G keys when all key lost, you need to remove the whole dash to retrieve the Immo box which has 93C66 , writing Master G key by Tango key programmer to start car. You can add key only when you have master key. I was told that in USA you can reset the Immo using MVP Key Programmer, but it is only for USA.


08:19 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)