topblog Ivoire blogs


How to use WIFI BMW ICOM A2+B+C Software

Best ICOM A2+B+C for BMW with latest 2015.3 software,New adds WIFI function. With second generation diagnose and programming system,More convenient to use,But in the course you maybe still encounter some problems.


What should you pay attention when use USB WIFI for WIFI BMW ICOM:

1)  Insert USB WIFI to your PC USB port first


2) Turn off the computer WIFI and other added WIFI. Your PC only can use our USB WIFI. Wired Ethernet port of your PC cannot connect internet and LAN cable for ICOM.

3) Make sure all above you have done, then start your PC.

4) After your PC is started. then make sure internet are all turned off or do not connect any LAN cable


Attention: this DWA-131 is our USB WIFI. You CANNOT turn off it. It is normal to show X.


5) Start the ICOM software, tick "wifi for ICOM"


6) After done. Now connect your ICOM firmware with your car. Wait for 20-60 second, then you will see the light on the ICOM main unit will flash slowly or do not flash. Then it means USB WIFI and ICOM A2 WIFI are matched ok and have communication.


7) Now you can use diagnose and programming software. Click OK if you meet the following prompt.


8) This interface cannot be closed. Only can be minimized.


9) Software can recognize firmware normally.


04:37 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


How to install Clone FgTech Galletto 4 V54 Master software

China clone 2014 FgTech Galletto 4 V54 Master with BDM-OBD function is the user-friendly ECU programmer that is respected by most professional tuners. Still some FgTech galletto beginners are seeking the software installation guide. Following is the step-by-step installation guide provided. 


Operating system:

Windows XP, Vista, Win7 (better to use our win XP O/S)


How to install FgTech Galletto 4 V54 ECU tuning software step-by-step?


Pre-install caution:



Video instruction:


Easy 10 steps:

1) Insert the CD software in package into computer 

2) Open “My Computer”, locate and open “FG TECH V54 (E:)” 


3) Open and install “FGtech Galletto Edited v1.0 Galletto setup” 


Follow the system prompt step-by-step: 

Click “Next” to install Galletto setup wizard-> Select “Destination location to C://FGTech”->Tick Create a desktop icon” and “Create a Quick Launch icon” on desktop

4) Un-tick “Launch Galletto”, click “Finish” when complete installing wizard  

5) Select “Install from a list or specific location (advanced)”


6) Browse and save files to “C://FGTech//fgtech-new-deriver”


7) Open Galletto software on the desktop 

The system will display a WinLicense prompt “This application has been registered to dragan xp”, click on “OK” button to continue 

8) Re-install “FGtech Galletto Edited v1.0 Galletto setup” again, follow the same above procedure or simply follow system prompts 


This time tick “Launch Galletto” and click “Finish” button if wizard is completely installed 

Press “OK” when EOBD message displays 

Launching FgTech Galletto software, accept EOBD2 warning message by clicking on “OK”


9) Select software language 

Multi language available: Italian, English, Deutsch, French, Spanish, Portuguese, Czech, Turkish


10) Select vehicle make, model, ECU type to read/write ECU


PS: If you fail to install FGTech Galletto v54 software on your computer, you can try our Win XP O/S. 


08:26 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Launch X431 5C vs. Launch X431 5C PRO vs. Launch X431 V PRO

Original LAUNCH X431 5C / LAUNCH X431 5C Pro Wifi and Bluetooth tablet diagnostic tool is designed to replace the previous Launch X431 V (PRO). What exactly the difference between the 3 automotive multi-brand OBD2 scanners? Better check out the table below:

Launch X431-1.jpg

Launch X431-2.jpg

05:03 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)