topblog Ivoire blogs


UPA USB No Programmers Connected to the USB Module Error

Here is the UPA USB device programmer “No Programmers Connected to the USB Module” error possible causes and proper solution provided to deal with the communication error. 



When installing UPA USB serial programmerV1.3.0.14 software on Win 7 operating system, the UPA software is well loaded, but the system give an error message when connect UPA USB programmer with computer:


No Programmers Connected to the USB Module


Error photo taken:



Possible reason:

1)Drive software issue 

2)Computer issue 

3)Device is damaged 


Proper solution:

1)Check if the UPA USB driver is correctly and well installed which means UPA USB V1.3.014 software can only works with corresponding UAP USB device (green color). Do not load UPA V1.2, V1.3 software with UPA USB V1.3.0.14 full adapter hardware. Otherwise, the system will not detect the driver. 

2)Change another laptop running Win XP operating system and re-install the software 

If the above procedure is done properly, your UPA USB ECU programmer is damaged. Send your main unit back to your dealer for repair.

10:26 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


ODIS V2.23 software for VAS 5054A VAG groups technical support

After i install and activate the software, when i open the software from desktop, it gives this prompt "required java runtime version 1.7u4 not fould". what should i do next?



Reason: This problem is caused by your system java does not support this ODIS software.


Solution: 1) do not open the software from the screenshot of your desktop. Open the software from start, then see if you can start this software.

2) If still have this prompt. You need to change to use our WIN7 system, then install this software again. For WIN7 system, please send email to to ask for the download link.

09:45 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

How to add tokens for KESS V2 V2.13 FM4.036 ECU tuning kit

KESS V2 V2.13 firmware V4.036 Manager Tuning Kit master comes with no token limitation. KESS V2 V2.13/V2.12 software CD comes with token program, you can program tokens without removing chips or desoldering chips. 


One of our customer reported that he fails to add token according to the video when he has only 9 tokens left. Here is the step-by-step adding KESS V2 tokens instruction. 


How to program and add tokens for V2.13 or V2.12 KESS V2 ECU Programmer?



Please disable both local area connection and wireless network connection, otherwise the KESS V2 ECU tuning device will be damaged. 


Extract “Tool” Zip File;

Copy all the files under “Tool” Folder to the desktop;

Copy “K-Suite_tokens” zip File into Local Dick C and unzip the file;


Run “K10033818 K2-TR ECU TUNERS”;

Click “OK” to continue;


Browse the folder to C:KSuite tokensKSuite;

Click OK;


Click “Rest Token Count” button;


Click OK and then wait for loading;

Next close the window;

Delete previously unzipped “K-Suite_tokens” Folder in C:;

Re-extract “K-Suite_tokens” Zip File again;

Re-name “Token1.tok” on the desktop as “Token2.tok”;

Copy “Token2.tok” to the “Tokens” Folder;


Open “K10033818 K2-TR ECU TUNERS” again;

Select location as C:KSuite tokensKSuite again;

Click “Rest Token Count”;

Wait until the KESS V2 main menu window displays;


Adding tokens for KESS V2 V2.13 or KESS V2 V2.12 is completed.

05:53 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)