topblog Ivoire blogs

17/10/2015

Golf 7 GTD 2014 rpm not stable, how to diagnose and tune

Problem:

I've problem with Golf 7 GTD 2014

Golf 7 GTD 2014 rpm which have not stable I made a diag with original vcds I got only ASAM file not found EV_ECM20TDI01104

2 unknown error

 

The engine speed is a bit low, I need more power for this car.

 

Here is the flash I read it using mpps 16.1.02 

Vehicle Vin Number: WVWZZZAUZEW012758

VW Hardware Number: 04L906021EE

VW Software Number: 5225

VW System Type: R4 2,0L EDC 

VW Engine Code: CRVA

VW System Data: EV_ECM20TDI01104

BTW, I made a mistake I was thinking mpps can read read golf 7 edc17c64.  

my mpps is clone one so in the menu have EDC17xx uds that's why I think it can read it.

 

The professional advice I got:

Tuning is no good way to "repair" car.

Better to repair your car...and after that using a tuned file...at contrary, you can damage more...please do a log of your car and see where is the problem before..also a good diagnose with good tools...

 

Problem solved:

It was very simple I made a good diagnosis as advice me.

With original v15.7 vcds

I have not found any of default

I just made an adaptation for the acceleration of idle speed

 

But the customer still wants to tune his car. I thought the kess v2 will do can read. 

And I get professional advice: kess v2 clones not work on golf 7 yet. 

CMD CAN Flasher and maybe original ktag 7.008 or magpro x17 will do. 

Considering CMD CAN Flasher is cheapest and working, I already got the CMD CAN Flasher when I'll read the ecu I'll post the dump here. According to its description, it is packed with only one single USB CAN cable and one CD, and golf 7 is in the vehicle supported list.

cmd-can-flasher-v1251-04.jpg

04:24 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

16/10/2015

How to: Mercedes 722.9 7-G Tronic Change plate process

Here is the full document on changing Mercedes-Benz 722.9 7-G Tronic transmission plate with Mercedes dealer Star diagnostic system and special software. 

 

Aim:

This is a ML W164 320 CDI with problem in plate on automatic gearbox (7G Tronic). It needs to change the plate. 

star-diagnosis-videmo-coding-1.jpg

Solution:

Install it then carry out Star Diagnosis SCN coding (Online Mb account)

Next Programming 

Later adaptations (you can save from your old computer and enter a new one, or just ride by car) 

It is good to also do at the same time the engine programming. 

 

If you have Vediamo, we can read the old Unit string and paste it into the new one.

If you have FVDI Abrites Commander, it will do the job as well.

 

Tools needed:

MB Star C3 diagnostic system (I am using Super MB Star MUX)

Vediamo 4.2 

 

NOTE: If you using MB SD Connect C4 system, you have to use Vediamo V05.00.05.

 

How to:

722.9 7-G Tronic Change plate process

For this procedure must have Star Diagnostic DAS developer and VEDIAMO software.

In Vediamo must install in this folder:

star-diagnosis-videmo-coding-2.jpg

And com port fix to work on same prt like DAS.

star-diagnosis-videmo-coding-3.jpg

Before work with DAS read and save SCN coding from old plate on your computer.

 

Then follow instruction below:

In Star diagnosis DAS –developer choose “Development data”

star-diagnosis-videmo-coding-4.jpg

All process is automatic just read and do what DAS ask 

star-diagnosis-videmo-coding-5.jpg

All process is automatic just read and do what DAS ask after that

star-diagnosis-videmo-coding-6.jpg

You must do offline programming with new software from DVD

star-diagnosis-videmo-coding-7.jpg

In some version of DAS you have option to delete old coding from plate! 

Job with DAS is done 

Now VEDIAMO procedure-

star-diagnosis-videmo-coding-8.jpg

Setup option for MB Star C3 mux.+ install com port fix!!! Do following settings:

star-diagnosis-videmo-coding-9.jpg

star-diagnosis-videmo-coding-10.jpg

star-diagnosis-videmo-coding-11.jpg

star-diagnosis-videmo-coding-12.jpg

star-diagnosis-videmo-coding-13.jpg

star-diagnosis-videmo-coding-14.jpg

star-diagnosis-videmo-coding-15.jpg

star-diagnosis-videmo-coding-16.jpg

star-diagnosis-videmo-coding-17.jpg

This is option to coding from selection but in manual coding you can read coding from your car and save to your pc- look picture below

star-diagnosis-videmo-coding-18.jpg

And after procedure with DAS you can return coding to new module.

star-diagnosis-videmo-coding-19.jpg

Ps:

This is not cheap. The most cost-optimal way is to order the bundle package:

 

SD Connect multiplexer + Dell HDD+ Dell laptop + Free Vediamo V5.00.5

http://www.obd2express.co.uk/wholesale/mb-sd-connect-comp...

08:39 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

15/10/2015

VAS 5054a ODIS 2.2.6+ PostSetup 6.70.1 Win 7 installation

VAG Volkswagen VAS 5054A ODIS diagnostic software for VW, Audi, Skoda, Seat, Bentley & Lamborghini is newly updated to 2.2.6 version with PostSetup 6.70.150. Here is the instruction on installing ODIS V2.2.6 on Windows 7 operating system. 

 

Software version: ODIS 2.2.6 + Postsetup 6.70.150+ free license 

Hardware: The new ODIS 2.26 software works with vas 5054 interface pass-thru SP33, SP33-B, SP33-C and SP33-BO (NO SP33-D !!!)

 

Operating system: Windows 7 (32-bit is better)

vas-5054a-odis-2.2.6-1.jpg

vas-5054a-odis-2.2.6-2.jpg

vas-5054a-odis-2.2.6-3.jpg

vas-5054a-odis-2.2.6-4.jpg

ODIS engineering 2.2.6 software installation on Win 7:

Main steps:

Step1: Install Driver 

Step 2: Install ODIS software 

Step 3: Activate/Validate license 

Step 4: Mount PostSetup-6.70.150

Step 5: Activate ODIS 2.2.6

Step 6: Connect vas 5054 via USB

Step 7: Bluetooth connection

 

Step1: Install Driver 

Open ODIS 2.2.6 software CD

Copy and paste Daemon-Tools-4.49.1356 zip file to desktop

vas-5054a-odis-2.2.6-install-1.jpg

Unzip the file 

Open Daemon-Tools-4.49.1356 folder, mount “InstalGadget” and run as administrator

vas-5054a-odis-2.2.6-install-2.jpg

Accept security warning, click “Install”

Adding virtual device

vas-5054a-odis-2.2.6-install-3.jpg

Click “Install”

System will detect driver and automatically install it

vas-5054a-odis-2.2.6-install-4.jpg

Step 2: Install ODIS software 

Open Daemon-Tools folder on desktop 

Open 01.Setup folder 

Open ODIS-S v2.2.6-RC369L-P6-Setup

vas-5054a-odis-2.2.6-install-5.jpg

Select language 

Install Offboard Diagnostic Information System Service setup, click “Continue”

vas-5054a-odis-2.2.6-install-6.jpg

Select target folder, press “Continue”

Select language again 

Press “Continue” until the system asks to select the license file 

Search license file to C:ODIS-2.2.6/02.Patch License/license.dat

vas-5054a-odis-2.2.6-install-7.jpg

vas-5054a-odis-2.2.6-install-8.jpg

Press Continue 

Click “Finish” when ODIS setup is well installed

vas-5054a-odis-2.2.6-install-9.jpg

Step 3: Activate/Validate license 

Open ODIS 2.2.6 CD

Open 02.Patch License folder 

Copy OffboardDiagLauncher and follow next step

vas-5054a-odis-2.2.6-install-10.jpg

Right click Offboard Diagnostic System Service software on desktop>>Properties>>Open File Location>> paste and replace OffboardDiagLauncher on the existing folder

vas-5054a-odis-2.2.6-install-11.jpg

Open Daemon tools folder 

If the system prompts “unable” to find activated DAEMON Tools Lite license, press “Continue”

Choose license type: Free license and click “Activate”

vas-5054a-odis-2.2.6-install-12.jpg

Click “Validate” to confirm license info.

License was validated successfully. 

 

Step 4: Mount PostSetup-6.70.150

Add image to “Image Catalog”

Browse image to C:/ODIS 2.2.6/03.Postsetup 6.70.150/ Postsetup 6.70.150

vas-5054a-odis-2.2.6-install-13.jpg

Mount PostSetup-6.70 iso

vas-5054a-odis-2.2.6-install-14.jpg

Step 5: Activate ODIS 2.2.6

Open ODIS v2.2.6 software on desktop 

Select Local directory to BD-ROM Drive (G:100)/Postsetup

vas-5054a-odis-2.2.6-install-15.jpg

Enter activation User name: abc and Keyword: abc (both low-case “abc”), press forward arrow to see Postsetup version

vas-5054a-odis-2.2.6-install-16.jpg

vas-5054a-odis-2.2.6-install-17.jpg

Press forward arrow to download 384 files ODIS.data file, the procedure takes about 30 minutes

vas-5054a-odis-2.2.6-install-18.jpg

Download completely will open ODIS automatically 

ODIS release notes information 

Click “Admin” on the right 

Select software language 

Exit the ODIS 

 

Step 6: Connect vas 5054 via USB

Open Computer 

Eject BD-ROM Drive (G:100)

vas-5054a-odis-2.2.6-install-19.jpg

Connect vas5054a interface with computer and vehicle 

System will automatically install vas 5054a device driver 

Open Computer>>Manager>>Device Manager>>Softing Vehicle Interface>> VAS5054 to make sure well communication is built

vas-5054a-odis-2.2.6-install-20.jpg

Run ODIS software on desktop 

Press “Start diagnosis”

Turn ignition switch 

Select vehicle information, model, year, engine etc

vas-5054a-odis-2.2.6-install-21.jpg

Select model and function your need diagnose 

 

Step 7: Bluetooth connection

If you need to diagnose wirelessly, follow these steps to add Bluetooth. 

Tick the Bluetooth icon on toolbar, click “Add a device”

vas-5054a-odis-2.2.6-install-22.jpg

Select “VAS5054” and add to device

vas-5054a-odis-2.2.6-install-23.jpg

Enter Bluetooth pair password: 082145725

vas-5054a-odis-2.2.6-install-24.jpg

Open Computer>>Manager>>Device Manager>> check Com port was set to COM4 >>Network adapters Bluetooth Device to check Bluetooth connection is well built

vas-5054a-odis-2.2.6-install-25.jpg

Open ODIS Service Diagnostic Interface Configurator on desktop 

Click “Add EDIC”

Select “VAS5054” to install

vas-5054a-odis-2.2.6-install-26.jpg

Select Local Bluetooth COM Port (COM4)

vas-5054a-odis-2.2.6-install-27.jpg

Run ODIS software 

Star diagnose vehicle wirelessly

 

PP077 ODIS 2.2.6+ vas5054a

http://www.obdexpress.co.uk/wholesale/best-quality-vas-50...

08:48 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)