topblog Ivoire blogs


Best V2.13 KTM100 KTAG FW V7.003 ECU Programming Tool

The new K-TAG KTM100 is 100% J-Tag compatible, but in a completely different way.Recognize vehicle ECU via ID automatically. One button click to charge tokens. Software is more easily to use than any other version. New adds BMW F** and Benz W222 series. Get free gift TITANIUM V1.61 software.

FREE DOWNLOAD: V2.13 KTM100 K-TAG KTAG supported vehicle list


1) Latest version for both software and firmware:
Software Version: V2.13 (New KTM100 software, much better than ordinary Ksuite software)
Hardware Version: V7.003

2) Multi-Language: English, Italian, Portuguese

3)Supported operation system: MOST XP, WIN7 and WIN8.
This software can be installed on most XP and win7 system. For win8 system, we do not test. If your PC does not fit this software and get error when installation, please use our XP english system.

KTAG Connection Picture Display:


What is the difference between all K-TAG:

What is the difference between all K-TAG.jpg
KTM100 K-TAG KTAG error solution
Q: After i follow the video install the software. I get prompt "interface connected. Error: [e000079] customer code invalid." I can see driver on device manager. I turn off internet when i install this software. No anti-virus software too.

A: For this prompt, please check the following: Computer cannot connect the internet. Check driver is installed successfully or not.
Since your first two are all ready, check the TF card on the main unit. Resert it to main unit again. Then this problem will be solved.

What should you pay attention when you use this KTM100:
1) DO NOT USE internet when you use this software.
2) DO NOT update the software or firmware online.
3) DO NOT use anti-virus software.

07:49 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


CBAY Handy Baby Auto Key Programmer 4.2 Free Download

(Nov. 18th, 2015) The newest CBAY Handy Baby V4.2 has released. Here, obd2express offers tips for you to get the latest Handy Baby V4.2.

Free download CBAY Handy Baby V4.2:
*Content included:
USB Driver
handy baby 4.2 update
NET framework

Compatible device:
Clone Handy Baby Auto Key Programmer for 4D/46/48 Chips copy




CBAY Handheld Car Key Copy Software display:




How to use CBAY HADY BABY to copy4D/46/48 Chips:

08:00 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


VCM II IDS Clone Recommendations and Advice

There are a lot of the cheap VCM II clone in the market, and which one is better to get? Any advice to follow, please have a look at the following parts for reference.

(Tested) VCM II from this site is verified working well.
This one VCM-II works:
I can verify it does seem to run faultless & already wifi enabled.

This one VCM-II works:
It’s done all I've asked off it, Pcm update, pump/inj learns, config. Runs fine on my w7 notebook and iPhone.

More recommendations and advices on VCM II:
Apart from the hardware differences between the clones, there could be software trouble.....
The last calibration DVD is version c81. The last (hacked) version of ids is 86.
You could install both and enjoy dealer level diagnostics and module updates up to 2011/2012 vehicles.

Later version of IDS requires online activation and calibration downloads.
There are some tricks/hacks which make use of the 3 day grace period after installation.
But I have no idea if it will download all the calibrations.....

If you buy a VCM (whatever version you fancy) its firmware must match with the ids version you want to use.
For instance you buy a cheap VCM clone made for ids 86. When you upgrade to ids version 91, you need to update the VCM's firmware...... You can't do this with (most) the clone; you will break it due to blacklisting or incompatibilities.

So the advice...... For most people: go to the dealer for all the updates and buy a modified elm327 with the free software.
If you really want a VCM; you will have to simply try.

Just be careful - updating a module isn't simple and if you get it wrong or the IDS your using isn't up to scratch then you could render the car unusable! Just don't update all modules at the same time!

You need to support the battery with a support unit rather than a charger to cope with the amount of Amps drawn. If the battery voltage drops below 12v the IDS will drop comms and half way through an update will blank the module.

07:11 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)