topblog Ivoire blogs

04/01/2016

Techstream and MVCI on 64bit Windows 8.1 & Win 10 works!

Especially download Windows XP system for Techstream interface (suggested by obd2express technicians), just to shut off the DRL'S. Then leaved it aside.

Recently, wanted to shut off the passenger side seatbelt warning. My little daughter are always annoyed with that. No way!! But, only with Win 8 now.

Found this last week, had a tried, and it worked wonderfully on my Asus Windows 8.1 Intel i3 notebook:
http://blog.diyobd2.fr/2015/08/12/how-to-install-techstream-v10-10-018-in-windows-78-64bit-os/

The thread includes a dropbox link where you can download "all" of the needed files, but really all you need from there is the MVCI driver and the .reg registry hack file.

Get the latest Techstream from:
http://www.chinaautodiag.com/download/toyota-techstream-10.10.018.zip

There are a number of steps to getting the driver installed manually, be sure to follow ALL of them before plugging the cable in.
On my 8.1 installation, when I plugged in the TIS cable, Windows automatically looked for and installed the driver, so if you haven't followed the instructions to that point, it will load the 32 bit driver.

After installing the driver, you need to run the registry hack. Mine downloaded as mvci-x64.reg.txt (might be a Dropbox restriction), simply rename to mvci-x64.reg
After renaming the registry hack file you then need to run the file, which will merge the contents with the registry (will probably get a Windows modification confirmation) 

Once the driver was loaded and I verified with the firmware update utility that it was communicating (don't try to update the firmware), I was ready to install and run Techstream.

Again, follow the directions on installation.
One .ini file needs to be edited to "activate" the program.

Upon loading, you'll need to select "Europe" and then your preferred language. The key thing is that only the "Europe" option works.
For the user and all other blank mandatory fields, I just typed in "111" and left the default "Albania" 

Next, select VIM type xHorse
Now, you'll want to set your preferences for units. It defaults to metric, and it also defaults to absolute for the TPMS so at first you'll be scratching your head at the 46psi tire pressure... set that one to "gauge"

There is no need to launch anything in XP compatibility or anything (at least not on my Windows 8.1 system)

PS. Yesterday, I found some tested TIS on Win10 X64! Then tested this version on my wife's Corolla using 32 bit Windows 10 just to see if it would work. It did. Also noticed that Win10 put in its own driver for the Techstream cable which seemed to work just fine with the program. 

Oh, yes. This may work for MVCI cable also, with the same software Techstream.

07:50 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

01/01/2016

New arrival European software for XPROG 5.55 ATMEGA64 Repair Chip

ATMEGA64 Repair Chip update XPROG-M ECU Programmer from V5.0/V5.3/V5.45/V5.50 to V5.55 Full Authorization (Including CAS4) with stable European software is available at obdexpress.co.uk

ATMEGA64-Repair-Chip-300x249.jpg


New features of the XPROG 5.55 ATMEGA64 Repair Chip
1. European solution on XPROG-M software, tested for all versions, very reliable.
2. Supports any XPROG-M Version update, all can be updated to latest V5.55
3. Supports ALL authorizations (including CAS4).

How to use the xprog update chip:
First, Our update chip and software suitable for any version XPROG-M Hardware. Our package only include update chip and software, not include XPROG-M hardware.
Second, we ship the update chip and software from European directly by post service.
Third, after you receive the update chip, solder new Atmega64 MCU to your xprog. Overwrite all files and folders from Xprog_Preinstalled,to your native Xprog install. Usualy C:Program FilesELDBXprogor C:Program Files(X86)ELDBXprog.
You can now start and Run Xprog. If you want to use this version on brand new PC, please install Xprog 5.0 and Adobe acrobat reader prior to files copy.

XPROG-M V5.55 Software Display:

atmega64-repair-chip-update-xprog-m-programmer-a-1.jpg

atmega64-repair-chip-update-xprog-m-programmer-a-2.jpg

atmega64-repair-chip-update-xprog-m-programmer-a-3.jpg

atmega64-repair-chip-update-xprog-m-programmer-a-4.jpg

atmega64-repair-chip-update-xprog-m-programmer-a-5.jpg

atmega64-repair-chip-update-xprog-m-programmer-a-6.jpg

atmega64-repair-chip-update-xprog-m-programmer-a-7.jpg

atmega64-repair-chip-update-xprog-m-programmer-a-8.jpg

atmega64-repair-chip-update-xprog-m-programmer-a-9.jpg

10:47 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

31/12/2015

VVDI MB Tool 2.0.4 Add Mercedes BGA Key Step by Step

OBDEXPRESS technicians has successfully added BGA keys of Benz W166, 197, 212, 218, 246, with Mercedes key programmer- vvdi mb bga tool 2.0.4. Here is the instruction for you.

Tool used:
laptop
Original VVDI MB tool

vvsi-mb-tool-add-bga-key-(0).jpg
Successfully added BGA key includes:
Mercedes Benz W166, 197, 212, 218, 246

Step-by-step procedure to add bga key:

Step 1 Read EIS data
Connect VVDI MB BGA Tool to the laptop.
Go to EIS Tools. And click Read EIS data.

vvsi-mb-tool-add-bga-key-(1).jpg
Reading data success.

vvsi-mb-tool-add-bga-key-(2).jpg
Step 2 Password Calculation
Go to Password Calculation.
Select the Chassis: W166, 197, 212, 218, 246 and Mode: OBD
And click Data Acquisition.

vvsi-mb-tool-add-bga-key-(3).jpg
Do follow the prompt on the screen.
Insert the working key to EIS, and then click OK to go on.

vvsi-mb-tool-add-bga-key-(4).jpg
Insert working key to Device IR Reader, and click OK.
Insert the working key to EIS, and then click OK.
Insert working key to Device IR Reader, and click OK.
Processing data acquisition... (5 minute needed)
Insert the working key to EIS, and then click OK.
Insert working key to Device IR Reader, and click OK.
Data reading success.
Save data.

Step 3 Upload data to send acquisition data
Acquisition finished. Click OK.
Upload the saved data with Upload Data for password.

vvsi-mb-tool-add-bga-key-(5).jpg
Upload success. Click OK.

Step 4 Queue result to get result
Queue number 1, require 1 minute to finish. Click OK.

vvsi-mb-tool-add-bga-key-(6).jpg
Find correct password. Click Copy.

vvsi-mb-tool-add-bga-key-(7).jpg
Password was copied to clip board.

Step 5 Paste password and save EIS data
Go to EIS Tools.
Click Read EIS data.
Click Paste to get key password.

vvsi-mb-tool-add-bga-key-(8).jpg
Click Save EIS data.
Click OK to save HC05 format file.

Step 6 Prepare key file
Go to Prepare Key File.
Click Load EIS file.

vvsi-mb-tool-add-bga-key-(9).jpg
Select the file to load, and click Prepare Key File.
Prepare Key File...
Save key file.
Preparing keys...
All key files

vvsi-mb-tool-add-bga-key-(10).jpg
Step 7 Read and Write Key
Go to Read Write Key.
Click Identification key.
Reading data success.
Again, click Identification key.
Reading data success.

vvsi-mb-tool-add-bga-key-(11).jpg
Click Load key file to get it. (here: key8_F7CCD165_used_051)
Click Write.
Writing data success.

vvsi-mb-tool-add-bga-key-(12).jpg
Click Identification key.
Reading data success.

vvsi-mb-tool-add-bga-key-(13).jpg
Add BGA key success.

Other successful case about vvdi mb tool:
Change EIS on W172, 204, 207....OK
Calculate EIS 221 password....OK
All key lost on W172, 204, 207....OK
Read and renew ELV on W204, 207, 212....OK
Renew EIS on W172 204 207....OK

07:03 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (2)