topblog Ivoire blogs

12/04/2017

BMW E-Sys 3.28.1 Download Free & Install on Windows XP

Free download BMW E-Sys v3.28.1 Psdzdata Lite v3.61.1 on Mega: NO Pass

 

E-Sys 3.28.1 is the newest version, but not tested by professionals yet. You may try on your own risk when using ver. 3.28.1.

 

Download E-sys software v3.23.4: 100% Tested & Working Perfectly

Coding no issues for BMW F series with an ENET cable

 

How to install E-Sys 3.28.1 Psdzdata 3.61.1 on Windows XP

 

1     You must uninstall the existing E-SYS version before installing new E-SYS 3.28.1. After installing tested it with Launcher 2.7.0 and it works.

2     E-SYS Launcher Premium V2.7.0 Build 132(require NET Framework 4.5.2 or later)

3     E-SYS Launcher Premium V2.7.0info

Added cheat code selection

Change Code Default Values button name to DO NOT USE!!! (VERWENDEN SIE KEINE!!!)

 

 

How to install BMW E-sys 3.28

 

Run E-Sys_Setup_3_26_1_b42487.exe

Select language, click “Next” then “I accept the agreement” then “Next”.

Click “Browse” to choose where to install E-Sys. The default location is C:EC-AppsESGE-Sys.

download-bmw-e-sys-3-28-1-1

 

Set the data path for E-Sys, the default is C:Data.

download-bmw-e-sys-3-28-1-2

 

Click next until the installation begins.

download-bmw-e-sys-3-28-1-3

 

Click “Finish” to complete the basic installation procedure for E-sys.

Then you need to make it work.

You will see two folders, one is a “Patch” the other is “Token Generator”.

download-bmw-e-sys-3-28-1-4

 

The patch folder contains 2 files

download-bmw-e-sys-3-28-1-5

 

Copy the svc0x80.jar file to the lib directory (C: /EC-Apps/ESG/E-Sys/lib)

Place the E-Sys.bat (batch file) in the same directory as the .exe file. Replace the .bat file in that directory (C: /EC-Apps/ESG/E-Sys)

Use the Token Software, enter a username as you like and password.

 

 

How to install Psdzdata?

 

This is an important and final step of the installation process. The E-Sys installation doesn’t contain any data so you must copy the data into the right folder.

 

It’s recommended to use the Psdzdata “Lite” version because it has all the Firmware data removed so it saves a lot of space!

 

Extract Psdzdata using Winrar. Right click it and click “extract here”.

 

After that go to C:Data and erase the existing “Psdzdata” folder and copy this extracted new one in the same location.

 

 

What can you do with bmw esys enet for bmw coding?

Programming = Flashing a module, which means changing the actual software. Best done with a BMW ICOM emulator.

Coding = Reading and writing the memory which contains the configuration. Can be done with an ENET cable.

 

With bmw enet esys, you can hide modules or code a module

 

  1. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic)
  2. Can operate the navigation menu including watching dvd when driving( for driving safety. Let the side driver operate the navigation menu )
  3. Display engine output and torque meter ( purely fun, look engine output )
  4. Cancel confirmation screen big screen boot delay
  5. Open the voice recognition function
  6. Three kind of bluetooth phone ringtones ( personality only )
  7. Increasing the cic memory address to 50
  8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting )
  9. The digital speed display ( fun only )
  10. Air-conditioned memory of the last off state ( without air conditioning season is more convenient )
  11. Indoor cycling memories of the last time the state when engine off
  12. A-pillar electric tailgate buttons and remote control a key to close the power tailgate. At any time terminate the reverse operation ( turn off 15 minutes or more reset )
  13. Increasing shift paddles
  14. The small screen to the large-screen display modify
  15. Pdc display vertical and horizontal
  16. Disable the seat belt status display – passenger seat
  17. Disable the seat belt status display – driver seat
  18. Disable seat belt reminder mistake ! The link is invalid. Device – passenger seat
  19. Disable seat belt reminder – driving position
  20. Disabled unfasten their seat belts voice prompts – passenger seat
  21. Disabled unfasten their seat belts voice prompts – driving position
  22. Intersection vehicle high beam automatic control ( no condition tested. Do not know if it is valid )
  23. Angel eyes open and cancel functions

24 turn off the engine start-stop function turned on by default

25, gps time synchronization

  1. Foot open the back cover
  2. Ds show s1-s7 selection
  3. Active sports gearbox program sport +
  4. Single microphone settings
  5. Engine off automatically unlock
  6. Internet applications
  7. Armrest usb playback video
  8. The maximum distance disable front camera view
  9. The maximum distance to disable the rear camera view
  10. Maximum speed disable front camera view
  11. The maximum speed to disable the rear camera view

 

08/04/2017

How To Install FGTech Galletto V54 correctly with Win 7

Here is our customer experience of how to install FGTech Galletto V54 correctly with Windows 7

(Big thanks to Mr.Tim Thiessen ,good info to share with  FGTech Galletto users in obd2express.co.uk)

 

Here is the error when he was installed the FGTech Galletto V54 on Windows 7

FGTech-Galletto-V54-install-on-win7-error

 

Solution :

Hello, I would like to explain to you step by step how to install your FGTech Galletto V54 correctly with Windows 7. To do this, you must first uninstall the already installed software and the drivers.

Then we start with step:

1. Run “FGTech Galletto Edited v1.0.exe” as an administrator. Important: Do not create a desktop icon and run the program yet.

2. Next, connect the Galletto device to the power supply and then connect it via USB. The automatic driver installation fails. But do not worry, the installation is done manually.

3. Right-click on the “Computer” icon and select “Manage”. As soon as the window opens, click on Device management and select the USB port “FGTech”. Here you have to click “Update driver software”. And then click “Browse the computer for driver software”, then “Select from a list of device drivers on the computer”, then “Have Disk” and “Browse”.

4. Now look for the folder of “FGTech” on drive C. Here you open the folder “fgtech_new_driver” and select the following file: “fgtibus.inf”! Confirm everything, wait for the installation, and close all windows.

5. Run “FGTech Galletto Edited v1.0.exe” again as an administrator. Important: Do not create a desktop icon and run the program yet.

6. Run “Galletto win7.exe” as administrator. Create and install the desktop icon. If the installation is complete, start the program as an administrator.

7. Ignore the next two windows with hints and confirm with OK. FINISHED!!!

Hopefully this guide is understandable.

06/04/2017

SDconnect C4 Wlan Error 2 Solved: Reset IP address

I have bought a Chinese SD Connect C4 MUX. Connected via the green LAN cable everything is working great on a EVG7 tablet with SSD and 2017.3 Xentry.

 

Problem is i cannot get the wireless working.

MUX display WLanError 2 , and the Wlan mac id is blank on the unit.

 

the Wlan Error2

sdconnect-c4-wlan-error-2-message-2

see the screenshots

 

sdconnect-c4-wlan-error-2-message-1 sdconnect-c4-wlan-error-2-message-2 sdconnect-c4-wlan-error-2-message-3

Here is a solution…tested OK by professionals.

 

RESET LAN & WLAN IP address as follows:

 

On Desktop, right click to go to Personalize

sdconnect-c4-reset-ip-1

Control Panel-> Network and Internet-> Network and Sharing Center

sdconnect-c4-reset-ip-2 sdconnect-c4-reset-ip-3

Network Connection-> Local Area Connection 2 Properties-> Internet Protocol Version 4 (TCP/Pv4) Properties

Use the following IP address:

IP address: 172.29.127.119

Subnet mask: 255.255.255.0

sdconnect-c4-reset-ip-4

Change adapter settings

sdconnect-c4-reset-ip-5

Network Connection-> Wireless Network Connection 3 Properties-> Internet Protocol Version 4 (TCP/Pv4) Properties

Use the following IP address:

IP address: 192.168.2.110

Subnet mask: 255.255.255.0

sdconnect-c4-reset-ip-6

 

Open Road24h Ad-Hoc Connector for C4 Mux

Click on -1- Make Roard24h Ad-hoc Profile, then OK

sdconnect-c4-reset-ip-7

Click on -2- Connect to MUX via Road24h, then OK

sdconnect-c4-reset-ip-8 sdconnect-c4-reset-ip-9

Road24h now is connecting

sdconnect-c4-reset-ip-10

 

Open Administration

SDconnect Toolkit

Information

sdconnect-c4-reset-ip-11

Register/Configure

Setup Encryption: WEP/ Hex

sdconnect-c4-reset-ip-12

Enter the key

sdconnect-c4-reset-ip-13

Copy the key as the network security key

sdconnect-c4-reset-ip-14

Start

sdconnect-c4-reset-ip-15

Road14h is connected

sdconnect-c4-reset-ip-16

The network location is now Work

sdconnect-c4-reset-ip-17

SDconnect Toolkit Preview

sdconnect-c4-reset-ip-18

 

 

It’s working!

 

Xentry/DAS can be used via WIFI.

http://blog.obdexpress.co.uk/2017/04/06/sdconnect-c4-wlan...