topblog Ivoire blogs

26/08/2017

R280 BDM programmer work perfect on BMW F series CAS4

R280 BDM programmer is verified to work perfect with BMW F series and BMW CAS4 cars.

 

Here is the car and ECU list... Tested no issues by uob

 

Support R280 BMW F series:

BMW 1 series – F20, F21 chassis – pre-2016

BMW X1 series – E84 chassis – pre-2016

BMW 3 series – F30, F31 and F35 chassis – pre-2016

BMW X3 series – F25 chassis – pre-2016

BMW 5 series – F10, F11 and F18 chassis – pre-2016

BMW X5 series – F15 chassis – pre-2016

BMW 6 series – DMEM/F12 F13 chassis – pre-2016

BMW X6 series – F16 chassis – pre-2016

BMW 7 series – F01, F02, F03, F04 chassis – pre-2016

BMW GT series – F07 chassis – pre-2016

Support for BMW EWS4 (2L86D).

Support EZS:

1J35D/2J74Y/4J74Y/0L02M/1L02M/3K85K/3K91D/1L85D/1L59W/3L40K/4L40K, etc.

Support a variety of SRS computers:

9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K79X/5H55W, etc.

Support M35080 series:

quick wipe, read and write 35080/35080-V6/35080-VP/080D0WQ/160D0WQ/35160, etc.

Support FLASH 0K50E online write.

 

Support for BMW CAS and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.).

R280 CAS4:

R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(1) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(2) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(3) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(4) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(5) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(6) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(7) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(8) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(9) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(10) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(11) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(12) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(13) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(14) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(15) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(16) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(17) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(19) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(20) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(21) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(22) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(23) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(24) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(24) R280-BMW-CAS4-programmer-read-write-5M48H-eeprom-(25)

Src:

16/08/2017

Where to download Mazda IDS v106 software

Free download Mazda IDS v106 software to work with Vxdiag Vcx Nano Mazda:

http://pan.baidu.com/s/1qYnwXIk

Password: r5oi

Released by Allscanner Vxdiag Vcx Nano

Allscanner Vxdiag Vcx Nano Mazda

 

Mazda IDS 106.00 download free on Mega:IDS 106.00

https://mega.nz/#!qgYzRSqR!wRrh4jDELcFVG2YISV6P-_nFKpJKgDChyqo2H-rEGmE

IDS 106.02

https://mega.nz/#!2t5CADKR!dfjtRV2_yC4TFtZkaBXPx_rku3ejY5K97Cz_tVgLyQU

No pass

Shared by SCOTT via the MHH forum

 

How to setup Vxdiag Vcx Nano Mazda IDS 106:

http://blog.obdexpress.co.uk/2017/07/12/download-install-...

How to install Mazda IDS 106 for Vxdiag Vcx Nano:

Install M-IDS, install latest VCX Manger, update the firmware and your good to go.

 

Why Mazda IDS 106 say it’s 105 version:

You may get that error that installed version is not 106.00 … and even when you run the 106.00 installation again … it says it’s 105.06A.

Just edit reg to match the one your trying to install.

Then it should install.

 

07/08/2017

How to program PCM with As-Built data with Ford IDS software

To program the PCM with As-built information via Ford IDS software:

 

Enter the Module Programming menu in the IDS

Select As-built and then the PCM

If the PCM is not listed in the As-built tab, use the following process to manually enter the information.

Select the IDS logo in the upper left corner of the screen.

Select the Pocket knife in the lower left corner of the screen.

Select “Update/Special Functions” from the Miscellaneous menu.

 Ford IDS software update function

 

Enter 53061 into the blue box and click the tick.

Return to the Module Programming menu and select PMI then the PCM.

Follow the on-screen prompts and enter the As-built data when the IDS prompts for it. This data is available from the OASIS report for this VIN under the As-built tab. It has also been provided below for your convenience.

Complete the PMI process by continuing with the on-screen directions.

Complete the PMI process by continuing with the on-screen directions.

To get As Built Data, go to Motorcraftservice.com

Under Non-Subscription Resources, click on Quick Guides.

13 dot points down you will fine, “Module Build Data (As-Built)”

Enter “Module Build Data”

Enter the VIN# then submit. As Built Data will then be displayed in IDS interface.

 

 

Some codes/info listed here as an example:

 

Use at your own risk!

 

00008 – IDENT_APPLY_PATCHES_VIA_FLOPPY

00009 – IDENT_UPDATE_PTU_FROM_FLOPPY

32287 – IDENT_LAUNCH_APP_MCP_REST

60503 – IDENT_LAUNCH_REGRESSION_RECORDER

27001 – IDENT_LAUNCH_FT_EOL_CP_MZ_01

32247 – IDENT_LAUNCH_SERVICE_ROUT

24040 – IDENT_ENABLE_VALIDATION_MODE

24041 – IDENT_DISABLE_VALIDATION_MODE

23761 – IDENT_LAUNCH_APP_FT_DATA_REC

81105 – IDENT_LAUNCH_APP_TSBSSMLIST

53061 – IDENT_IGNORE_MCP_INHALE

26503 – IDENT_LAUNCH_APP_VVAG

81104 – IDENT_LAUNCH_APP_FTW_SHIP_MODE_01

29124 – IDENT_TOGGLE_FORD_EXTRANET_INTRANET_URLS

60274 – IDENT_LAUNCH_CCC_ENGINEERING_APP

32227 – IDENT_LAUNCH_PROPSHAFT_BAL_APP

48712 – IDENT_LAUNCH_GENERIC_RCM_CONFIG_APP

28487 – IDENT_LAUNCH_FT_ICCMSP_MZ_01_APP

28097 – IDENT_TOGGLE_BATTERY_MONITORING

70263 – IDENT_LAUNCH_GENERIC_DIAG

71863 – IDENT_MCP1

63296 – IDENT_LAUNCH_FTW_RKE_MODE_01_APP

08080 – IDENT_LAUNCH_DETAILED_NETWORK_DIAG

32267 – IDENT_LAUNCH_APP_ENG_SUPPORT_TOOL