topblog Ivoire blogs

19/08/2016

Free download 08.2016 BMW ISPI ETK 3.1.30 Spare Parts Catalog

The newest BMW electronic spare parts catalogue ETK 03.1.30 version 2016.08 has been released and shared at forums. Quoted it to share.
 

 

Free download:
BMW ISPI ETK 08.2016 (NOT tested, unknown security)
BMW ETK 04.2016 (Tested OK, SAFE, NEVER expire)
 
Optional systems to install: Windows XP, win 7, win 8
 
 
the information on spare parts and accessories of machines and motorcycles for all regions, since 1932 (machine) and since 1948 (motorcycles).
 
  • detailed part information such as part type, reference number (old part number), price, weight etc., which was previously only possible by searching in different microfilms.
  • installation location of a part (part use)
  • retrofitting possibilities
  • parts belonging to a parts kit
  • standard parts catalog
  • parts interpretation (history of retrospectively changeable parts)
  • spring table
  • accessories
 
 

Parts catalog BMW ETK 3.1.30 models list:

 Current BMW models >>
BMW 1 series E81
BMW 1 series E87
BMW 1 series E87 LCI
BMW 1 series E82
BMW 1 series E88
BMW 1 series F20
BMW 1 series F21
BMW 2 series F22
BMW 3 series E36
BMW 3 series E46
BMW 3 series E90
BMW 3 series E90 LCI
BMW 3 series E91
BMW 3 series E91 LCI
BMW 3 series E92
BMW 3 series E92 LCI
BMW 3 series E93
BMW 3 series E93 LCI
BMW 3 series F30
BMW 3 series F31
BMW 3 series F35
BMW 4 series F32
BMW 4 series F82 M4
BMW 4 series F33
BMW 4 series F36
BMW 5 series E39
BMW 5 series E60
BMW 5 series E60 LCI
BMW 5 series E61
BMW 5 series E61 LCI
BMW 5 series F10
BMW 5 series F11
BMW 5 series F11 LCI
BMW 5 series F07 GT
BMW 5 series F07 GT LCI
BMW 5 series F18
BMW 5 series F18 LCI
BMW 6 series E63
BMW 6 series E63 LCI
BMW 6 series E64
BMW 6 series E64 LCI
BMW 6 series F12
BMW 6 series F06 GC
BMW 6 series F13
BMW 7 series E38
BMW 7 series E65
BMW 7 series E66
BMW 7 series F01
BMW 7 series F01 LCI
BMW 7 series F02
BMW 7 series F02 LCI
BMW 7 series F03
BMW 7 series F04 Hyb
BMW X1 E84
BMW X3 E83
BMW X3 E83 LCI
BMW X3 F25
BMW X4 F26
BMW X5 E53
BMW X5 E70
BMW X5 E70 LCI
BMW X5 F15
BMW X6 E71
BMW X6 E72 Hybrid
BMW Z3 E36
BMW Z4 E85
BMW Z4 E86
BMW Z4 E89
BMW Z8 E52
BMW i3 I01
BMW i8 I12
BMW MINI R50
BMW MINI R52
BMW MINI R53
BMW MINI R55
BMW MINI R55 LCI
BMW MINI R56
BMW MINI R56 LCI
BMW MINI R57
BMW MINI R57 LCI
BMW MINI R58
BMW MINI R59
BMW MINI R60
BMW MINI R61
 Old BMW models >>
BMW 1500-2000CS
BMW 1502-2002TII
BMW 3 series E21
BMW 3 series E30
BMW 5 series E12
BMW 5 series E28
BMW 5 series E34
BMW 6 series E24
BMW 7 series E23
BMW 7 series E32
BMW 8 series E31
BMW Z1 Roadster
BMW 700
BMW E3
BMW E9
BMW ISETTA
BMW M1
BWW V8
BMW VETERANEN
BMW Z1
BMW Z8 E52
 Rolls-Royce models >>
Phantom
Phantom EWB
Phantom Series II
Phantom Drophead
Phantom Drophead Series II
Phantom Coupe
Phantom Coupe Series II
Ghost
Ghost EWB
Wraith
 Current BMW moto >>
C1
F-SERIE
G-SERIE
K-SERIE
R-SERIE
 Old BMW moto >>
1-ZYL.
BOXER
R-BOXER

 

01/08/2016

08.2016 BMW ICOM A2 ISPI ETK Parts Catalog Free Download

Here’s a real user experience of DIY coding Lambda O2 sensors on BMW E series M5, via BMW K+DCAN INPA cable

 

Tools used:

K+DCAN cable with running INPA 5.0.2

 new-bmw-inpa-kcan-with-ft232rq-chip-expressuk-6s

Symptom in a sentence:

Lambda probe 1 and 2 dropping off, very high INPA RUN UNREST values, bad idle, misfire, sporadic symptoms

 

Details of M5 setup:

I'm helping a friend with his M5, he's been trying to fix it the last 2 months. From what i've been told, he's changed the 4 CPS, O2 sensors, CCV, plugs, and both vanos boards. I tested both boards today and the solenoids respond as they should. He had issues with vanos first and it appears as if it didn't help at all.

The symptoms i'm experiencing consist of the car starting just fine. It will run great for the first minute or two, then the probe voltage value will dip down to 0. It's really random with what bank it is, usually the right bank(pass side). Sometimes both will drop but when the probe voltage begins to drop, the RUN UNREST values significantly spike on all 8 cylinders. I tried plugging a brand new O2 sensor i had in which did not change anything. A bad connection in the circuit defaults the readings to 0.45 but the values being ~0 indicates something else is going on. Once the reading drops to zero, i can blip the throttle and 9 out of 10 times the readings will quickly jump back up to .75+ or something near the other bank and the car will run absolutely great. Then a after about another 10-15 seconds the probe voltage begins to drop back down the symptoms come back. A check engine light eventually does come up, i've attached all the codes that are present. Misfires on all 8 cylinders.

I pulled the plenum and swapped ICV, check the vacuum lines for leaks and i could not find any. Replaced the plastic elbow on the T fitting that goes on the throttle body side of the ICV. Swapped all 8 coil packs with no change, swapped O2 sensors with no change.

The car is running an Alpha N tune so the MAFs don't make a difference. I put the old tune back on and it did not change the symptoms of the car, it acted exactly the same.

inpa-codes (1)inpa-codes (2)inpa-codes (2)inpa-codes (2)inpa-codes (2)

 

Finally solved!

Eliminated the MAF code, there was some questionable wiring done.
Now i'm getting a O2 code via the K+DCAN cable.

 

O2-sensor-code-from-inpa

That is likely because the MAFs are toast, but you may need to run the car a few hundred miles to let it re-adapt. Relative filling looks to high for idle. Pretty sure that is calc load which should be 18%. If you go back to Alpha then you will be stuck with bad adaptions. Regardless of what companies are saying we never see the adaptions change on Alpha and the report is always that middle of the road reading which seems to be INPA lying.

 

The bank 1 O2 sensors were crossed with the bank 2 O2 sensors. Whoever did the clutch install messed it up and the owner has been driving the car like that since and throwing money at parts randomly. He failed to tell me that it started once the clutch was installed.

This explains why when the car was running alpha-N, it would be extremely sporadic. The car relies heavily on the O2 because there is no maf. One bank was getting fueling increased and the other decreased. The increased side would not throw codes and the lean side would. It also explains why the car went back to normal when you revved it, it didn't need the O2 sensors and was relying on the throttle/cam/crank position sensors to calculate fuel ratios.

The MAFs helped calm the car down a little bit because it had a second input from the MAFs which were trying to adjust the fuel trims, but they could only do so much before the car threw a fuel trim code.

Everything is fixed and the car is running just like it should now.

source:http://blog.obdexpress.co.uk/2016/08/03/inpa-setup-on-lam...

Free download 2016.08 BWW ETK electronic parts catalog on Windows XP for the  latest information on spare parts and accessories of machines and motorcycles.

 

Free download 

BMW_ISPI_ETK_08_2016.zip

https://mega.nz/#!GssQXKoA!L_MByZVsoXNX6Il_3a4q59SWVEdgs4taBK5BRfCvGTw 

(unknown security, time limited)

 

BMW ETK 04.2016

 

(Never expire, cracked, no pass)

Note:

Safe BMW ETK is also available in BMW software ISTA-D 3.55.31 ISTA-P 3.59.0.600

to work together with ICOM A2 or ICOM A3 pro+ for diagnosis or programming

 

 

You are advised to install BWW ETK electronic parts catalog 2016.08 on Windows XP as follows:

Step 1 - Open ETK_04_2016.iso2016.08-BMW-etk-3.1.30-setup-1-600x375.jpg

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Insert BMW ETK disk BMW2016 E:, then open it

Copy “ETK_04_2016.rar” to lock disk D: and unzip there

Open DAEMON Tool Lite on Desktop

Add image: Local disk d:/ETK_04_2016.iso

 

Mount “ETK_04_2016.iso”

Internet explorer: active content.... Select NO

2016.04 BMW ETK information

2016.08-BMW-etk-3.1.30-setup-2-1.jpg

 

Step 2 - Install ETK 2016.04

Open ETK_04_2016 F:

Open “setup”

Select ETK setup language

2016.08-BMW-etk-3.1.30-setup-3-1.jpg

2016.08-BMW-etk-3.1.30-setup-4-1.jpg

 

Click Next to install ETK

2016.08-BMW-etk-3.1.30-setup-5-1.jpg

 

Next *3

Being setup...

Port selection

2016.08-BMW-etk-3.1.30-setup-6-1.jpg

Properties: select “Use the US interface”, then ok

Follow the screenshots to do the selection

2016.08-BMW-etk-3.1.30-setup-7-1.jpg

2016.08-BMW-etk-3.1.30-setup-8-1.jpg

2016.08-BMW-etk-3.1.30-setup-9-1.jpg

2016.08-BMW-etk-3.1.30-setup-10-1.jpg

2016.08-BMW-etk-3.1.30-setup-11-1.jpg

2016.08-BMW-etk-3.1.30-setup-12-1.jpg

2016.08-BMW-etk-3.1.30-setup-13-1.jpg

2016.08-BMW-etk-3.1.30-setup-14-1.jpg

2016.08-BMW-etk-3.1.30-setup-15-1.jpg









 

 

Step 3 - Load parts data

Select CD-ROM drive

2016.08-BMW-etk-3.1.30-setup-16-1.jpg

 

Wait and spare parts is being loaded...

Parts data have been read

2016.08-BMW-etk-3.1.30-setup-17-1.jpg

 

Step 4 - Run BMW ETK

Open ETK (local) on Desktop

2016.08-BMW-etk-3.1.30-setup-18-1.jpg

2016.08-BMW-etk-3.1.30-setup-19-1.jpg

 

 

Close BMW ETK 3.1.30

 

Step 5 - Run ETK Admin

Open ETK Admin on Desktop

Go to Extras->language.. to select a language

2016.08-BMW-etk-3.1.30-setup-22-1.jpg

Close ETK Admin tool

 

Done!

 

This article from :http://blog.obdexpress.co.uk/2016/08/01/08-2016-bmw-icom-...