topblog Ivoire blogs

15/11/2016

(solved) Vocom + Tech Tool view DTCs of MACK truck

I'm have a MACK to read faults, but unluckily I failed to diagnose (view DTC's) or use any off the other features of my Tech Tool 2.04.87. PTT says the software is incompatible and that version on the control unit(s) is not supported by Tech Tool.

Here is my version info:

Product: Tech Tool
Version: 2.04.87
Database: Standard

Last updated: APCI (-A) 11/8/2016 12:19:36 PM
Last updated: APCI+ (-A) 9/14/2016 1:56:29 PM

Every time I go to view DTC's I get these errors :
it says: the version of software installed in the engine and vehicle electronic control units are incompatible. Electrical faults will present in one or both modules. Upgrade the software in one or both modules to correct the problem.

tech-tool-version-incompatible

then i Click OK and get this one:

Software on the control unit(s) below is not supported by Tech Tool.

Please update Tech Tool and try again.

144 144

software-not-supported-by-tech-tool

Then ask obd2express for help.. solved my issue

I am advised to update the firmware of 88890300 Vocom Interface. Just follow the screen message to do that. Then tech tool works like a charm.

BIG thanks to http://www.obdexpress.co.uk/

11/11/2016

Condor key cutting machine & Internet is necessary for VVDI2?

Usually, Xhorse VVDI2 key programmer can work great alone. But in some situations, vvdi2 functions are limited because of Condor key cutting machine (Condor xc-007, iKeycutter condor mini, condor xc-002, etc.)

 

"The following functions need Internet support and require authorize for CONDOR Automatic Key Cutting Machine:

OBD read MED17/EDC17 PIN/CS/MAC,

Calculate OBD data online,

Calculate EEPROM/FLASH for PIN/MAC/CS"

Other ECU's work good.

 

 

Reference:

Xhorse VVDI2:

http://www.obdexpress.co.uk/wholesale/xhorse-pro-vvdi-2-i...

VVDI2 = VVDI options + BMW Multi Tool options + Porsche options + J2534(free) + Tango(free) + Remote control generation(free)…..more other function

 

VVDI2 BMW:

http://www.xhorseshop.com/wholesale/vvdi2-with-basic-bmw-...

http://www.obdexpress.co.uk/upload/service/xhorse-vvdi2-v...

 

 

VVDI2 manual:

http://www.obdexpress.co.uk/upload/pro/xhorse-vvdi-2-soft...

08/11/2016

How to update kess v2 2..8 software

This software update program can use in :SE87:KESS V2 OBD2 manager tuning kitSE87-C: Kess v2 4.036 firmwareSE87-E: Kess v2 3.099 firmwareSE87-K: KESS V2 Truck versionSE87-CK: V4.036 Truck KESS V2
Kess v2 2.25/2.28 installation steps:

Step 1 – install K-Suite v2.25

Run K suite software and install K-Suite 2.25

software-and-install-k-suite-2-251

Accept the license agreement

Select installation language to go on

software-and-install-k-suite-2-252

Install usb driver

software-and-install-k-suite-2-253

always click on Next until installation completes

software-and-install-k-suite-2-254

Ksuite installation success.

Ksuite language: English, German, Spanish, Italian, Portuguese, French

software-and-install-k-suite-2-255

Step 2 – disable network

Disable all network connection

software-and-install-k-suite-2-256

Step 3 – setup Ksuite properties

Go to Ksuite properties

Click on Find targets, then delete the “help” folder in C:Ksuite

Copy another “help” folder in disk E: to C:Ksuite

Close all windows

 

Step 4 – install & setup software for USB device

Select install USB device software automatically

After finishing the installation, go to Computer management

Select USB device

software-and-install-k-suite-2-257

Step 5 – Ksuite v2.25 read BMW E90 ecu

Run KSUITE on desktop

It’s Kess v2 ksuite v2.25

software-and-install-k-suite-2-258

Here we test Kess v2 on BMW E90 MED17/MEV17 ECU reading

 

software-and-install-k-suite-2-259 software-and-install-k-suite-2-2510 software-and-install-k-suite-2-2511 software-and-install-k-suite-2-2512 software-and-install-k-suite-2-2513 software-and-install-k-suite-2-2514 software-and-install-k-suite-2-2515 software-and-install-k-suite-2-2516 software-and-install-k-suite-2-2518 software-and-install-k-suite-2-2519 software-and-install-k-suite-2-2520 software-and-install-k-suite-2-2521

BMW e90 reading ecu OK. Save data.

 

Step 6 – setup Ksuite v2.28

Delete “Setup 2.25” on Desktop

Again, open Ksuite properties

Click on Find targets,then delete all files in C:Ksuite except the “help” folder

Copy all files in the Ksuite 2.28 zip file to C:Ksuite

Delete the Ksuite 2.28 zip file

Then open K-suite app on Desktop

It’s ksuite 2.28 version now

kess-v2-ksuite-v2-28

Ksuite 2.28 can read BMW e90 ecu id like Ksuite 2.25 above

kess-v2-v2-28

Done!

http://blog.obdexpress.co.uk/2016/11/08/update-k-suite-ke...