topblog Ivoire blogs

06/04/2017

SDconnect C4 Wlan Error 2 Solved: Reset IP address

I have bought a Chinese SD Connect C4 MUX. Connected via the green LAN cable everything is working great on a EVG7 tablet with SSD and 2017.3 Xentry.

 

Problem is i cannot get the wireless working.

MUX display WLanError 2 , and the Wlan mac id is blank on the unit.

 

the Wlan Error2

sdconnect-c4-wlan-error-2-message-2

see the screenshots

 

sdconnect-c4-wlan-error-2-message-1 sdconnect-c4-wlan-error-2-message-2 sdconnect-c4-wlan-error-2-message-3

Here is a solution…tested OK by professionals.

 

RESET LAN & WLAN IP address as follows:

 

On Desktop, right click to go to Personalize

sdconnect-c4-reset-ip-1

Control Panel-> Network and Internet-> Network and Sharing Center

sdconnect-c4-reset-ip-2 sdconnect-c4-reset-ip-3

Network Connection-> Local Area Connection 2 Properties-> Internet Protocol Version 4 (TCP/Pv4) Properties

Use the following IP address:

IP address: 172.29.127.119

Subnet mask: 255.255.255.0

sdconnect-c4-reset-ip-4

Change adapter settings

sdconnect-c4-reset-ip-5

Network Connection-> Wireless Network Connection 3 Properties-> Internet Protocol Version 4 (TCP/Pv4) Properties

Use the following IP address:

IP address: 192.168.2.110

Subnet mask: 255.255.255.0

sdconnect-c4-reset-ip-6

 

Open Road24h Ad-Hoc Connector for C4 Mux

Click on -1- Make Roard24h Ad-hoc Profile, then OK

sdconnect-c4-reset-ip-7

Click on -2- Connect to MUX via Road24h, then OK

sdconnect-c4-reset-ip-8 sdconnect-c4-reset-ip-9

Road24h now is connecting

sdconnect-c4-reset-ip-10

 

Open Administration

SDconnect Toolkit

Information

sdconnect-c4-reset-ip-11

Register/Configure

Setup Encryption: WEP/ Hex

sdconnect-c4-reset-ip-12

Enter the key

sdconnect-c4-reset-ip-13

Copy the key as the network security key

sdconnect-c4-reset-ip-14

Start

sdconnect-c4-reset-ip-15

Road14h is connected

sdconnect-c4-reset-ip-16

The network location is now Work

sdconnect-c4-reset-ip-17

SDconnect Toolkit Preview

sdconnect-c4-reset-ip-18

 

 

It’s working!

 

Xentry/DAS can be used via WIFI.

http://blog.obdexpress.co.uk/2017/04/06/sdconnect-c4-wlan...

05/04/2017

Honda HDS v3.101.044, where to download & how to install

 

Free download Honda HDS software v3.101.044:

https://mega.nz/#!nJpERZ4Y!wP3ouC2uuo3U-978ifIfmP26TJTy3biyi2K-lmHb2mo

 

Pass: Honda

tested 100%

confirmed to work no issues with Honda HIMdiagnostic tool on

work perfectly on Insight 2010

 

 

So, how to install Honda HIM HDS 3.101.044 Windows 7 32bit?

 

HDS 3.101.044 installation explanation via words...

 

 

Go to Computer

Open the DVD drive E: Honda 3.101.044

Open the folder Honda 3.101.044

Run the Setup application

 

Honda HDS 3.101.044 will begin installation.

Next

Accept the agreement

Select the destination. Here: Other (General)

Select the country. Here: the united states

Enter the dealer number 12345789012

Select a language to install

 

 

Honda HDS 3.101.044 is installing….

MVCI is installing….

Finish HDS installation

 

 

Back to the DVD drive E: Honda 3.101.044

Run GENERAL 64bit registration entries

Continue

GENERAL 64bit.reg have been successfully added to the registry

 

 

Copy all files in disk E:/new apps for genreg

Run Diagnostic system properties

Open file location

Copy and replace files in disk C:/GenRad/DiagSystem/Runtime/Apps

 

Close all the interfaces

 

Open Honda Diagnostic System on Desktop

This is Honda HDS 3.101.044 English Windows 7 32bit version

 

Press F12

Select HDS diagnostic interface: HIM

 

Test on INSIGHT 2010

 

Select Honda system

 

PGM FI

 

 

 

DTCs/freeze data

 

 

So, Honda HDS 3.101.044 is working no issues.

Source from http://www.obdexpress.co.uk/service/honda-hds-v3101044-fr...

23/03/2017

DAS Internal error: (3.91)-3.11 (customer solution)

Today I connect to car W211 (DAS) with 12.2016, I get this Error.

System error

Internal error: (3.91)-3.11 You must contact the user help desk.

das-internal-error-3.91-3.11

 

I resolve Megacar 3.91 issue. I get 20+ PM for help everyday and I helped them all.

Thanks bud for showing a good attitude to 12_2016. I do not understand why some releasing a fix with conditional $$. Little bit of ingenuity, 12_2016 works flawless. I am the first one put 2 torrent for 12_2016 and one 09_2016.

I probably fixed 50+ 3.91 error in this forum and other various forum for free. Like a superstar said, you gotta understand the system.

I am a car fanatic. Having a e55, R350, Brabus 7.3s (30 made), Alpina B10- biturbo (317 made), Lotus Esprit twin turbo (97 car per year). Porsche Cayenne Turbo S (735hp), Two Ferrari 360 modena 445 hp), Mini, M3, M5, 330ix, Acura TSX 6spd tuned wit nitro and twin turbo to 400+, JAG XJS, Range Rover and a FOOOken Prius.

I had all CN Sw for all my car and one day got decided to do own my own. Started with Xdos 07_2016. go no where. All the superstar want me to read and learn. How the hell you wanted me to learn, when I do not know where to start. Only Pesona helped me here. I mean he spoon feed me to get me started.
I have tactical advantage. I use 15+ laptop an many different HDD.

I have mastered XDOS, ISTA, PIWIS, TIS, Xentry PT, HDS, VIDA, JLR SDD, FVDI, Nissan Consult, Autocom, WOW, VCDS, ODIS, Ferrari Leonardo, FORD/Mazda IDS, GM, Actia various calibration and correction tools.

I can install fresh win7/XDOS with SSD + 8GB in about 3.5 hrs complete.I may release the 3.91 fix or total step by step for 12_2016 in HONOR of Star Master “Pesona”. He taught me to share and gain.