topblog Ivoire blogs


[Download Crack+ Install] V2018 Actia Multi Diag 43.06 On Windows7

V2018  Actia Multi Diag arrived at, here we'd like to share the free download links and installation method:



Actia 3.2018 43.06:!QNskhKqY!q93QYap0xNayDMhO1Y0DRpf_OkpkYJ...


older version Actia 1.2018 42.09:!croCEKIQ!7PHYKUAWkVqKBfc1DTzmQtJUEcYx9i...

VCI 033918


Security: unknown, not tested by professionals yet


Good to know: you need luck with actia multi diag interface china clone

For sake of security and convenience, you'd better to have actia reliable

here are all tested versions, confirmed to work perfectly

actia multi diag 2018:

actia multi diag 2016:

actia multi diag 2015:

actia multi diag 2014:

actia multi diag 2013:

actia multi diag 2011:



It works with any Actia interface either genuine or clone as long as the PIC chip is flashed properly. For 1st generation yellow you need to reflash PIC12F629 (link for guide bellow), as for 2nd generation XS 2G (silver/black) you need to reflash 16F630 (I will look for a guide for this one). They all use the same software and drivers from this INFO file. I went from a clone 1st gen to a genuine 2nd gen on the same laptop, same software without changing anything. I strongly advise people to buy a genuine 2nd gen since it's got a powerful program behind with all functions and furthermore you can use it as a Passthru device (it has J2534-1 and J2534-2) with various dealer software. You hit 2 birds!


First of all, you must modify or buy a modified clone. The procedure is the same on all Actia devices, either clone or genuine or 1st or 2nd generation.

1st generation yellow VCI: Link for guide if your chip PIC12F629 is not modified :

2nd generation silver XS 2G: I did not find a proper guide now, all I know is that you have to reflash PIC16F630.



Installation instructions:




@@@@@@@@@@INTERNET MUST BE OFF@@@@@@@@@@@


  1. run ACTIA_NET_BLOCK.bat (Run as administrator if possible)
  2. run Activation MAJ MD 033918/keyUpdate (Run as administrator if possible)
  3. Install Actia Multidiag Standard Profil (if the case, use S/N: 033918 instead of xxxxxxx) (I selected country: France and simply changed language after installation)

RESTART COMPUTER after installation finished

  1. Go to C:ACTIAPortal
  2. Remove Wget.exe
  3. Go to control panel -> uninstall or change a program -> there are 3 drivers made by ACTIA. Remove all 3 drivers.
  4. Install I+ME-Actia-PassThru-XS2G-Driverpack-


Then: (supplier told me it is optional, I have done it anyway)

  1. Go to C:ACTIAPortalchromemultidiagcontentscripts
  2. Open in a text editor file multidiag.js
  3. Go to line "var showWarningPT1Window=true" and make this line like
  4. "var showWarningPT1Window=false"


Then: Run the application, connect VCI to car and to laptop's USB, try to make a diagnostic on a car and it should detect a new hardware. If it does not recognizes it, then you have to update it manually via Start menu->right click on computer->Manage->Device Manager->Other devices->Right click on Unknown device->Update driver software->Browse my computer for driver->"C:ActiaDrivers VCIPT1G"


If you want to update from older version, simply uninstall old version and make sure you follow the steps again completely (including removing the 3drivers)


Note: it should appear each time when you diagnose that your VCI is old and blablabla, just click continue and it connects to the car

Note2: My supplier told me that it might not be 100% compatible with all cars as it is the old interface and does not do the multiplexing like the newer one. I tested on a few cars from 2000 to 2015 and for 300euro it is worth adding to collection!

Note3: On 2nd gen XS 2G it should be recognized it automatically, it will not display any messages and will work much faster and stable.







  1. Actia Multi-Diag I 2009 v.16.21
  2. Actia Multi-Diag I 2010 v.19.10
  3. Actia Multi-Diag III 2010 v.21
  4. Actia Multi-Diag II 2011 v.23.07 + Vivid WorkShop
  5. Actia Multi-Diag III 2011 v.24.01 + Service Pack 3 v.24.31
  6. Actia Multi-Diag I 2012 v.25.13
  7. Actia Multi-Diag II 2012 v.26.08.1 + Service Pack 2 v.26.25 + Vivid WorkShop
  8. Actia Multi-Diag III 2012 v.27.06 + Service Pack 2 v.27.21 + Vivid WorkShop
  9. Actia Multi-Diag I 2013 v.27.31 + Vivid WorkShop
  10. Actia Multi-Diag II 2013 v.28.08 + Service Pack 1 v.28.11
  11. Actia Multi-Diag III 2013 v.29.04+Service Pack 1 v.29.11+Service Pack 2 v.29.21
  12. Actia Multi-Diag IV 2013 v.30.06+Service Pack 1 v.30.11+Service Pack 2 v.30.21
  13. Actia Multi-Diag I 2014 v.31.09+Service Pack 1 v.31.11+Service Pack 2 v.31.21 + Vivid WorkShop
  14. Actia Multi-Diag II 2014 v.32.05+Service Pack 1 v.32.11
  15. Actia Multi-Diag I 2015 v33+Service Pack 1 v.33.11+Service Pack 2 v33.21+Vivid WorkShop
  16. ALL KEYGENS FROM v.19 TO v.32




  1. Actia Multi-Diag CD versions 6.1,6.3&7.3
  2. Actia Multi-Diag Trucks 2011
  3. Actia Multi-Diag I 2015 v.33.06+Service Pack 1 v.33.11+Service Pack 2 v33.21+Vivid WorkShop + KG
  4. Actia Multi-Diag II 2015 v.34.07+Service Pack 1 v.34.11+Service Pack 2 v.34.21
  5. PassThru programs,drivers and instructions on how to install them.
  6. Added Original MDO adapters pinouts

[Image: 105zjlt.png]

  1. Actia Multi-Diag III 2015 v.35.09+Service Pack 1 v.35.11+Service Pack 2 v.35.21
  2. Actia Multi-Diag I 2016 v.36.05+Service Pack 1 v.36.11+Service Pack 2 v.36.21+Service Pack 3 v36.31+Service Pack 4 v36.41
  3. Jaltest Trucks that has same interface as Actia Trucks versions 2013.3.1.1 and 2014.1.1.1



note: read the pdf files to know your tool better and to make proper choices, specialy for passthru programs.



password if needed: fantomelthanks to fantomel, bouizanne, zdsSF, Twist



Just in case, be sure you have these programs as well.


Final note:

As a personal experience, the 1st generation Actia is quite limited on newer Euro5+ cars, used on a variety of cars.  But for example it was the only one that could adapt pilot injection on a peuget boxer 2.2hdi among genuine delphi,kts,launch; on a BMW F30 328i it had all the functions and parameters as other testers I own. The second generation though it is something else. It connects much faster and you feel safe working with it.


ODIS 5.1.3 PostSetup 86.0.10 Launcher +License Free download

ODIS 5.1.3 PostSetup 86.0.10 is available to download and compatible with VCX NANO 5054, VAS5054A and VAS6154.


  1. ODIS 5.1.3 PostSetup 86.0.10 for VAS5054A and VAS6154:

You want to try to install the odis 5.1.3 by yourself, you can get the link of odis 5.1.3 software here.

ODIS 5.1.3 and postsetup + Flashdata without the activation files.!xB8wHIRD!JyYLxBi-ktDbPSOhkWUjnQ!G1pknSZJ!YL35mSvqviDEMrSZz12C-6ctAs7TQ2...

Tips: It is free source, so you have to try it at your own risk.!!!

odis-5-1-3-001 odis-5-1-3-002

Stable version ODIS V4.4.1: (VAS6154) (VAS5054A)


  1. ODIS 5.1.3 PostSetup 86.0.10 for VCX NANO 5054:

Software supplier:


VCX NANO 5054 interface + software supplier:

Size: 2TB disk



Coding ...confirmed

Programming key ...confirmed 

Coverage: 2001 -2018 year



Operation system:

WIN7: good

win10: good

Win8: not good


Multi-language is available:





ODIS 5.1.3 Installation:

Same as ODIS V4.4.10!pages/Volkswagen/ODIS_Ins...



It is recommended to open the automatic installer with administrator privileges.




ODIS 5.1.3 Software Functions:


- Estimated remaining times are shown for ECU flash operations.


- Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view, used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests


- The measured value display has been improved.


- Documents in GFF are displayed in separate windows.


- One message box will be shown at the beginning of the test drive mode.


- GFF hotfixes can be integrated during diagnostic sessions.


- Danger messages have been revised.


- Stopping of diagnostic sessions may be interrupted.


- Automatic deletion of autosave diagnostic protocols after successful transmission.


- Selection of PassThru diagnostic hardware has been improved.


- ODIS Service Software update has been stabilized.



Q: Downloaded vxdiag ODIS 5.1.3 to install and get the following error, I exit the software, reboot the computer, got the same error.

odis error-05


A: The computer has no big enough storage.

It needs 29.1GB.



More info will be continued.


ODIS 5.1.3 PostSetup 86.0.10 tech support is available at

03:54 Publié dans software download | Tags : odis | Lien permanent | Commentaires (0)


How to install, activate and crack Scania SDP3 v2.39.1 on Windows 7 32 bit

Scania VCI3 SDP3 software update to v2.39.1, here, shares some tips of Scania SDP3 v2.39.1,incl:how to install, activate and crack Scania SDP3 v2.39.1 on Windows 7 32 bit ...



you should have functional SDP3 v2.39.1 software for Scania VCI 3: (password: 5g4dh4)

or (no pass)

(This software does not need shipping, after your order, our engineers will help install and activate by TeamViewer.

Scania SDP3 V2.39.1 Confirmed:

Check and adjustment
Fault Codes
Fault Reporting
Programming of Control units

operating system:

SDP3 2.39 works well on Windows 7 32 bit


(confirmed by pros at

Video demo:


then you will have all files for installation


Step 1: install Adobe Reader


Step 2: install Microsoft .NET



Step 3: install sdp 3 v2.39 application



Step 4: run prerequisites (sdp 3 patch) as an administrator

scania-sdp3-2.93.1-windows7-install-7 scania-sdp3-2.93.1-windows7-install-8

PC restarts

Step 5: run x32 Windows command script


(install the driver software anyway)

Step 6: activate sdp3 2.39 with hardware id

copy hw id for activation


then will get an activation file


merge - success


copy SCOMM_SSK.dat and SCOMM_SSK_HL.dall


open SDP3 Properties - open file location - copy and replace files


Step 7: crack SDP3 software

scania-sdp3-2.93.1-windows7-install-16 scania-sdp3-2.93.1-windows7-install-17

PC restarts

Step 8: select a setup language in SDP3 configurator


Step 9: run SDP 3 and update Scania VCI

scania-sdp3-2.93.1-windows7-install-19 scania-sdp3-2.93.1-windows7-install-20 scania-sdp3-2.93.1-windows7-install-21 scania-sdp3-2.93.1-windows7-install-22 scania-sdp3-2.93.1-windows7-install-24

Now, Scania VCI3 SDP3 2.39 is ready for use!