topblog Ivoire blogs

09/01/2016

How to solve MB STAR DAS license expired problem?

I have question about my MB STAR software. Due trying to open DAS an massage appear YOUR DAS HAS EXPIRED. Error message link: fault 30.4. DAS license expired; DAS will now be closed.

How to unlock it ? Thank you

mb-sd-connect-compact-4-technical-support-and-error-solution-5333-7.jpg

Solution:

1) Close the software, and start the software again, go to DAS to find HW-ID, give us HW-ID.
2) Then go to the attached photo, and give me DAS lan ID.

mb-sd-connect-compact-4-technical-support-and-error-solution-5333-8.jpg

3) Send the code to use, we will give you the right activation code. Fill in the code. Then this problem will be solved.
More information: http://www.obdexpress.co.uk/service/mb-sd-connect-compact...

03:59 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

08/01/2016

Solution of KESS V2 ksuite warning: the tool is not updated

Customer Share on Kess v2 ksuite warning: the tool is not updated. Connect the PC to the Internet and run again the software.

kess-v2-warning.jpg

obd2express.co.uk technician give the useful tips of the error of Kess v2 ksuite warning “the tool is not updated”.

Solution
Try different USB cable.
Some users with the same problem fixed the problem by a new USB cable.
Reflash with J-Link.

Notice:
1. Do not update this tool online, or It will get damaged
2. Do remember disconnect internet when you use it

If you connect to internet with this clone kess v2, or make online update. The interface is destroy/broken.

1.–Buy a new NPX chip with 60 tokens inside. Desolder the old NPX and change it with new. 

Kess-V2-CPU-Repair-NXP-Chip.jpg

2.–or you have to weld a connector on backside of interface ,and plug the J-link programmer.
You can reset the Kess v2 to virgin.

kess-v2-plug-k-link-jtag.jpg

07:41 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

07/01/2016

Multi-Di@g Truck Heavy Duty Diagnostic software installation tips

Here is the tips you need to pay attention when you install this software and information about this multi-diag truck diagnostic tool.

Multi-Language: English, French, Spanish, Russian, Italian, Portuguese, German, Dutch, Swedish, Czech, Croatian, Hungarian, Rumanian, Serbian, Danish, Finnish, Polish.

Complete activation data is like this
PN - MA006964
FW - 11.3.1
SN - P001670707
Generated password: DD600F5A1233196EFA303929CB1CE929A
Send these information and your order number to sales@obd2express.co.uk. After we get these information, We will resend another activation data you need to you. Then you can use the data to activate your multi-diag truck.

multi-dig-truck-heavy-duty-diagnostic-software-installation-1.jpg

What should you pay attention to when you install this Multi-Di@g Truck software?
1) Make sure your computer system time must be the same date as you install the software
please dend the file 'key' to us. Before install the software, check the computer system time, it must be the time of the day, it can’t be changed.

2) Before we send you the activation key, please do not disconnect computer power supply and the device,
and do not let the computer sleep. You cannot close computer till successfully active the software.

3) We will give you the activation key

What is the difference for WAS Multi-Di@g Truck and ialtest Link Code Reader:
1) For european vehicles, they have no difference.
2) For USA vehicles, ialtest Link Code Reader software is newer than WAS Multi-Di@g Truck, so ialtest Link Code Reader can work more newer USA vehicles.
3) WAS Multi-Di@g Truck support more languages than ialtest Link Code Reader

Multi-Di@g Truck Heavy Duty Diagnostic Tool software shown:

multi-diag-trucks-diagnostic-tool-software-bluetooth-1.jpg

multi-diag-trucks-diagnostic-tool-software-bluetooth-2.jpg

09:26 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)