topblog Ivoire blogs


How to repair Digiprog 3 update failure- a blue screen

This is an ideal solution to fix Digiprog 3 (blue screen) after a upgrade failure. It has been tested ok by many users, especially the old Digiprog 3 owners updating 4.94 software themselves.

NOTE: you may be at risk to try this if not experienced enough.

1. Reasons of a blue screen.
a) inappropriate update for Digiprog 3. (the most common cause)
We must remember that updates are created for the serial number. The serial number of the update files must be Digiprog 3 serial number. Otherwise, upload the files to another serial number gives us the effect shown in the picture above.
b)interrupted during the upgrade of communication between PC and the digiprog III device.
c)Other causes: unrelated to update the device

2. How to fix the DIGIPROG 3 mux after a failed update.
To repair the unit, you need:
a) Update files with the corresponding serial number = serial number of the device.
b) Programmer serial memory for example, willem.

Ok, so we begin. We will have 3 digiprog undress and get into the PCB, exactly 2 serial memory.

You will see a such a view:

Us interested, memory, marked in the picture above. Are respectively a memory U1A and U2A. These are the memories that are 22, feet on one side, which is 44, feet the entire memory. We remove the memory U1A from the plate and put in the programmer.

Load a file content digi1.bin, to memory U1A.

Then again put memory on the board.

Do the same with memory U2A. Only here to load file Digi2.bin

Then again put memory U2A on the board.

Preferably before each update, do yourself a copy memory dumps U1A and U2A. Then we can go back in case of problems with the update to the old version.

Twirl, back digiprog. After this step, run digiprog. If everything went well that you will be greeted this image

This is offered by VR-6 at
For more possible solutions, please go to

04:36 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)



AUTOPHIX VAG 007 is a super scanner for detecting the Volkswagen Series and OBD II vehicles,It supports not only the KWP, TP-CAN and New UDS protocols, but also all OBD II protocols,It is small, light, handy and versatile, it gets data quickly.


Top 6 Reasons to Get VAG007:
1. Delicate and Portable
2. Automatic Scanner System,easy to operate
3. Multilingual Menu: English, German
4. Economical and practical
5. Oil Reset for VW/AUDI
6. Fast diagnosis and get data quickly

VAG 007 VW/AUDI OBDII Scanl Tool Compatible Vehicles:
VW/ AUDI/ SEAT/ Skoda/ Jetta/ Bora/ Santana/ Sagitar/ Magotan/ Golf/ Beetle/ Tiguan/ Touareg/ Passat and so on .

VAG 007 VW/AUDI OBDII Scanl Tool Function:
Read fault codes
Erase codes and turn off the malfunction indicator light
Retrieve vehicle information

Control unit info.
Read fault codes
Clear fault codes
Oil reset
TP Position check
EPB ReplaceBrakepads

OBD II function:
Work on all after 1996 OBD II
Compliant US, European and Asian vehicles

VAG 007 VW/AUDI OBDII Scanl Tool Feature:
Supports All VW Diagnositc protocols (KWP1281 KWP 2000 TP-CANBUS NEW UDS) and ALL OBD II protocols
(CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP 2000)
The maintenance of volkswagen series vehicles , such as oil reset, TPS function,brake pad reset and so on.
Can turn off the engine , transmission, ABS and airbag warning lights.

Fuctions for volkswagen Series:
01. MENUCOMM: Engine, Auto_Trans, ABS_Brakes, Auto_HVAC, Cent_Elect, Airbags, Steering_Wheel, Instruments and so on.
02. MENUDRIV: Engnie, DieselPump, AutoTrans, AWD etc.
03. MENUCHAS: ABSBrakes, Susp_Elect, ChassisControl, Airbags, SteeringAssist, TirePressure and so on.
04. MENUCOMF: AutoHVAC, PositionSensing, Steeringwheel, Aux_Heat, LaneChange, CentralConv etc.
05. MENUELEC1: Immobilizer, Instruments, Cent_Elect, Navigation, CANGateway, Towprotection etc.
06. MENUELEC2: DataTransfer, MediaPlayer, CtrlHeadDash, Inform_Electr etc.

08:45 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Free Download SSD V144 for Jaguar Land Rover

Jaguar and Land Rover software SDD V144 has been released at OBDEXPRESS. Free download SDD 144 for your Manoose or Mangoose Pro interface here.

Download SDD V144:

JLR PanasonicScript-Setup

SDD 144_143 UPDATE.exe












Operation system:

Windows XP

Win 7 32 bit

Supported Language:

English, German, Russian, French, Dutch, Portuguese, Japanese, Spanish, Italian and Simplified Chinese

Compatible tools:

JLR Mangoose

JLR Mongoose Pro (only available on Win XP)


PS. JLR mangoose cable with high-quality pcb:


How update Mangoose SDD V144 on Windows XP system:

1. Download "JLR PanasonicScript-Setup" to the SDD machine Desktop.

2. Double click "JLR PanasonicScript-Setup"

3. From the "Folder Tasks", select "Extract all files"

4. The "Extraction Wizard" will run, then select "Next"

5. Select a Destination to extract the files to and select "Next"

6. Select "Finish"

7. Locate and double click Folder "V2.9.1.0"

8. Double click "PanasonicScript-Setup.exe"

(DO NOT select "PanasonicScriptSetup.exe.manifest")

9. Several "MS Dos" pop ups will be seen during this application

10. The machine will be rebooted automatically

11. Following the "Reboot" there could be more "MS Dos" pop ups, once these have completed, the script has been run successfully.

Attention when using JLR Mangoose

No Internet Connecting; otherwise, it would damage to JLR Mangoose!!!

JLR version after V137 do not support offline programming, you can do the online programming