topblog Ivoire blogs


Chevrolet Mileage Correction with Digiprog 3 v4.94

Hello, guys. I made a small intruction here for you all on how to correct or change the mileage of Chevrolet Trailblazer using Digiprog 3 odometer programmer.

The guide is only for educational purposes and not by any means to be wrongly or criminally used for cheating or manipulating with cars mileage for sales purposes

Tool used:
Digiprog 3 v4.88+ st01/2 adapter


Chevrolet Trailblazer LTZ 2002

Here are my steps to change km:
connect serial port cable first then AC adapter
plug to the Digiprog 3 unit, then power it up

digiprog-3-change-km-Chevrolet (1).jpg

digiprog-3-change-km-Chevrolet (2).jpg

press the tick button to continue

digiprog-3-change-km-Chevrolet (3).jpg
press 1 for the password and press the tick button

digiprog-3-change-km-Chevrolet (4).jpg
choose EEPROM to read the chip

digiprog-3-change-km-Chevrolet (5).jpg

digiprog-3-change-km-Chevrolet (6).jpg

digiprog-3-change-km-Chevrolet (7).jpg
choose EEPROM-> READ

digiprog-3-change-km-Chevrolet (8).jpg

digiprog-3-change-km-Chevrolet (9).jpg
choose 95

digiprog-3-change-km-Chevrolet (10).jpg
choose s 95020

digiprog-3-change-km-Chevrolet (11).jpg
reading the chip

digiprog-3-change-km-Chevrolet (12).jpg
chip data

digiprog-3-change-km-Chevrolet (13).jpg
choose FILE-> SAVE, incase that something goes wrong

digiprog-3-change-km-Chevrolet (14).jpg
name the file and press the tick button to save

digiprog-3-change-km-Chevrolet (15).jpg
disconnect the power and restart Digiprog 3 to check the file
connect AC adaoter and plug again to start the unit
unplug the serial cable to verify the saved file and make sure that the unit is reading from saved file (NOT directly form the chip)

digiprog-3-change-km-Chevrolet (16).jpg
press the tick button
press 1 for the password and press the tick button
choose EEPROM
choose FILE-> SHOW, to open the list of saved chip data files

digiprog-3-change-km-Chevrolet (17).jpg
choose the saved file with the name
the old chip data is fine, then proceed (DELETE, then cross button)

digiprog-3-change-km-Chevrolet (18).jpg

digiprog-3-change-km-Chevrolet (19).jpg

digiprog-3-change-km-Chevrolet (20).jpg

digiprog-3-change-km-Chevrolet (21).jpg
connect to the chip

digiprog-3-change-km-Chevrolet (22).jpg
restart Digiprog 3
choose CAR/TRUCK

digiprog-3-change-km-Chevrolet (23).jpg
use up and down arrows to choose CHEVROLET->TRAILBLAZER

digiprog-3-change-km-Chevrolet (24).jpg

digiprog-3-change-km-Chevrolet (25).jpg
make sure the serial cable is connected in a right way
press the tick button to start reading the chip data

digiprog-3-change-km-Chevrolet (26).jpg
OLD mileage written in the top right corner and put the new mileage and press the tick button to write on the chip

digiprog-3-change-km-Chevrolet (27).jpg

digiprog-3-change-km-Chevrolet (28).jpg

digiprog-3-change-km-Chevrolet (29).jpg

- always save the old chip data in the Digiprog 3 programer for any thing goes wrong so you can write it back if needed or even if someone fried his chip and needed to install new chip it will be really easy to write it back
- if you needed any time to restart again or your Digiprog3 got stuck while working simply take out the Power plug and reinsert it again to restart the programmer (Never ever unplug AC power Plug when odometer correction tool is reading or Writing on the EEPROM CHIP otherwise you will destroy it)

05:09 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


How to use FVDI Read write MED17 EDC17

FVDI abrites commander for vag can read out the data of MED17, EDC17 engine control unit,can get 6-digit Security Byte and 5-digit login password by reading the data from MEDC17, and get 7-digit Security Byte by reading data from comfort modules.

What need to prepare for FVDI reading/writing MED17 EDC17?
PC, FVDI, USB cable, MEDC17 adapter, dongle, welding iron, solders, several 1K ohm resisters and 12V DC power supply.
(Note: refer to “medc17-pinout.pdf” that shows connections between MEDC17 adapter and MEDC17 ECU.)

Picture 1 shows connections between FVDI, PC, dongle, MEDC17 adapter. Your PC must be online.

MEDC17 ECU-1.jpg
How to read write MED17 EDC17 by FVDI?
Step 1: Disassemble MEDC17 ECU, uncover it.
Step 2: Connect MEDC17 ECU under instructions.
Step 3: Connect FVDI with PC, open VAG 18.0, and enter special functions, and select “EDC17/MED17 Engine Control Unit”. It’s shown as picture 2.

MEDC17 ECU-2.jpg
Step 4: Select correct MCU type, and click “CONNECT” as Picture 3.

MEDC17 ECU-3.jpg
Step 5: Read what you want to read.
Step 6: Assemble MEDC17 ECU and install it to vehicle.

05:38 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Porsche PIWIS PET 7.3 344 Torrent Free Download

Free download sapre parts catalog for Poesche cars PET 7.3 update 344 here.

PET 7.3 download:
Porsche PET PIWIS 7.3 344 Torrent.rar
PET 7.3 update 342/31 (tested good)

Region: All regions
Languages: English
Type: Spare Parts Catalog
Year: 2013
Medicine: Present

PET 7.3 344 Instruction:
1. Disable UAC
2. Install the HASP DRIVERS file of the same name folder HASPUserSetup.exe
3. Copy the folder MULTIKEY64 the root of drive C
4. Add the information to the registry launch reg file 0000750A.reg
5. Run DSEO13B.EXE Next Yes Click Enable Test Mode Next OK Exit Next
6. Restart the computer (in the lower right corner will - test mode)
7. Run DSEO13B.EXE Next Yes Sign a System File insert the path C: MULTIKEY64 MULTIKEY.SYS and click OK
8. Run the file from the folder INSTALL.CMD MULTIKEY64 and agree with everything
9. Install Etka and Porsche
10. The inscription - 'test mode', you can delete the file RemoveWatermarkX64.exe

Porsche PET 7.3 344 display:

porsche-pet-7.3-344 (1).jpg

porsche-pet-7.3-344 (2).jpg

porsche-pet-7.3-344 (3).jpg

porsche-pet-7.3-344 (4).jpg

porsche-pet-7.3-344 (5).jpg

05:12 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)