topblog Ivoire blogs

20/04/2016

VVDI MB BGA Tool 2.0.8 Software Free Download

This is the newest VVDI MB BGA Tool 2.0.8 version, updated in 04.2016. And benz vvdi software and can be free download at obdexpress.co.uk.

benz-vvdi-mb-tool-bga.jpg
Vvdi mb software 2.0.8 version update news:
*** Require firmware V2.0.8
===== BENZ V2.0.8 =====
1. Attention: All user update device to firmware v2.0.8, software v2.0.8
2. Add support renew/write NEC keys, keyless keys on board. Attention: New NEC adaptor is option component, Purchase from dealer
3. Fix bug in prepare key file for some B200 (W169) make key file
4. Fix bug in passwod calculation for some W216
5. Add support write renewed NEC keys, blank BGA keys etc
6. Bugfix

Attached Files:
VVDI - MB TOOL V2.0.8.rar
(password: 123456)

vvdi mb tool 2.0.8 update guide:
http://blog.obdexpress.co.uk/2016/01/16/vvdi-mb-bga-tool-...

Frequent installation issues and solutions:
Sometimes when i working with software, the pc shows a blue screen then restart ...
I tested on 3 pc and laptop with OS Xp and 7 (32bit)
--->that's driver issue,manually install driver or change another version driver try again.

VVDI MB TOOL support ALL benz keys after 2011:
705 Moto 1997-2000
NEC 2001-2010
BGA 2011-now

vvdi-mb-tool-for-all-benz-keys.jpg
NEC Key Adaptor support versions:
(Without soldering/ Without wire jumper/ Not need other adaptor)
Updating support more versions
Support v51 v57 get password directly
Support normal keys v28 v35 v40 v51 v57 renew on board
Support keyless go keys v03 v06 v07 v08 v09 v61 renew on board
Support normal keys v28 v35 v40 v51 v57 write key file by IR or on board
Support keyless go keys v03 v05 v06 v07 v08 v09 v59 v61 write key file by IR or on board

Notes: NEC Key Adaptor is optional,renew ESL adaptor under developing,will be released later at obdexpress.co.uk.

04:41 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

15/04/2016

Free Download KESS V2 K-suite V2.21 firmware 4.036

Update K-suite V2.21 here!! China clone Alientech KESS V2 firmware V4.036 ECU tuning kit K-suite master software has updated to v2.21 with no token limitation. New K-suite V2.21 software (6,005.0K) can be free downloaded here:
http://www.chinaautodiag.com/download/ksuite-v2.21.zip
Note: No network connection & No firmware update!! (FW: 4.036 only)

KSuite-v2.21 (1).JPG
KESS V2 OBD2 tuning kit vehicle list
http://www.obdexpress.co.uk/upload/pro/k-tag-kess-v2-2-11...

KSuite-v2.21 (2).JPG
Software version: K-suite V2.21
Firmware version: V4.036 (SE87-CSE87-D)

Top features:
1- No token limitation
2-  No Checksum Error
3- Multi-Languages: English, Spanish, Italian, French, German, Portuguese

kess-v2-language.jpg
4- Operating system: Windows XP/Windows 7

Newest clone Kess V2 2.21 with 4.036 Firmware add new models:
CAR
• New Family 527 (PORSCHE CONTINENTAL SDI6 CAN)
• New Family 528 (PORSCHE CONTINENTAL SDI7 CAN)
• New Family 529 (PORSCHE CONTINENTAL SDI8 CAN)
• New Family 530 (PORSCHE CONTINENTAL SDI9 CAN)
• New Family 531 (MAZDA DENSO RENESAS SH72543 PETROL CAN)
• New Family 533 (VAG BOSCH EDC17CP54 CAN)

TRUCK
• New Family 534 (CUMMINS GENERIC CONTINENTAL CM2220C CAN)

Using tips:
1- Please disconnect the network before you install the software or use the device
2- Please do not update KES V2 online.
3- Kess v2 can not do truck, only do car and some motorcycle.
4- If some ECU list options are grey, it is normal. KESS V2 will keep update new models. KESS V2 supports tractor till L15, cannot do newer L21, L22, L23 etc.

KESS V2 firmware 4.036 PCB board

kess-v2-c-pcb-board.jpg
How to connect Kess V2 to add tokens(Do not connect it to vehicles):

kess-v2-tokens-add-connection.jpg
KESS V2 Boot Mode connection diagram

kess-v2-boot-connection.jpg
KESS V2 OBD connection diagram

kess-v2-OBD-connection.jpg

05:04 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

14/04/2016

Chevrolet Mileage Correction with Digiprog 3 v4.94

Hello, guys. I made a small intruction here for you all on how to correct or change the mileage of Chevrolet Trailblazer using Digiprog 3 odometer programmer.

Disclaimer:
The guide is only for educational purposes and not by any means to be wrongly or criminally used for cheating or manipulating with cars mileage for sales purposes

Tool used:
Digiprog 3 v4.88+ st01/2 adapter

digiprog-3jpg.jpg

Model:
Chevrolet Trailblazer LTZ 2002

Here are my steps to change km:
connect serial port cable first then AC adapter
plug to the Digiprog 3 unit, then power it up

digiprog-3-change-km-Chevrolet (1).jpg

digiprog-3-change-km-Chevrolet (2).jpg

press the tick button to continue

digiprog-3-change-km-Chevrolet (3).jpg
press 1 for the password and press the tick button

digiprog-3-change-km-Chevrolet (4).jpg
choose EEPROM to read the chip

digiprog-3-change-km-Chevrolet (5).jpg

digiprog-3-change-km-Chevrolet (6).jpg

digiprog-3-change-km-Chevrolet (7).jpg
choose EEPROM-> READ

digiprog-3-change-km-Chevrolet (8).jpg

digiprog-3-change-km-Chevrolet (9).jpg
choose 95

digiprog-3-change-km-Chevrolet (10).jpg
choose s 95020

digiprog-3-change-km-Chevrolet (11).jpg
reading the chip

digiprog-3-change-km-Chevrolet (12).jpg
chip data

digiprog-3-change-km-Chevrolet (13).jpg
choose FILE-> SAVE, incase that something goes wrong

digiprog-3-change-km-Chevrolet (14).jpg
name the file and press the tick button to save

digiprog-3-change-km-Chevrolet (15).jpg
disconnect the power and restart Digiprog 3 to check the file
connect AC adaoter and plug again to start the unit
unplug the serial cable to verify the saved file and make sure that the unit is reading from saved file (NOT directly form the chip)

digiprog-3-change-km-Chevrolet (16).jpg
press the tick button
press 1 for the password and press the tick button
choose EEPROM
choose FILE-> SHOW, to open the list of saved chip data files

digiprog-3-change-km-Chevrolet (17).jpg
choose the saved file with the name
the old chip data is fine, then proceed (DELETE, then cross button)

digiprog-3-change-km-Chevrolet (18).jpg

digiprog-3-change-km-Chevrolet (19).jpg

digiprog-3-change-km-Chevrolet (20).jpg
unplug

digiprog-3-change-km-Chevrolet (21).jpg
connect to the chip

digiprog-3-change-km-Chevrolet (22).jpg
restart Digiprog 3
choose CAR/TRUCK

digiprog-3-change-km-Chevrolet (23).jpg
use up and down arrows to choose CHEVROLET->TRAILBLAZER

digiprog-3-change-km-Chevrolet (24).jpg

digiprog-3-change-km-Chevrolet (25).jpg
make sure the serial cable is connected in a right way
press the tick button to start reading the chip data

digiprog-3-change-km-Chevrolet (26).jpg
OLD mileage written in the top right corner and put the new mileage and press the tick button to write on the chip

digiprog-3-change-km-Chevrolet (27).jpg

digiprog-3-change-km-Chevrolet (28).jpg

digiprog-3-change-km-Chevrolet (29).jpg
Done!

Note:
- always save the old chip data in the Digiprog 3 programer for any thing goes wrong so you can write it back if needed or even if someone fried his chip and needed to install new chip it will be really easy to write it back
- if you needed any time to restart again or your Digiprog3 got stuck while working simply take out the Power plug and reinsert it again to restart the programmer (Never ever unplug AC power Plug when odometer correction tool is reading or Writing on the EEPROM CHIP otherwise you will destroy it)

05:09 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)