topblog Ivoire blogs


Copy 46 Chip and Read/write 46 chip with CBAY Handy Baby Key Programmer

Here is detailed step for Copy 46 Chip and Read / write 46 chip with CBAY Handy Baby Key Programmer.

Instruction of 46 Chip Copy

Instruction of 46 Chip Copy-1.png
Step 1:Turn on the machine and go to main menu , use “up” and “down” button to select language of English.

Instruction of 46 Chip Copy-2.png
Step 2:Read chip data of Original key as above picture shows.

Step 3:Press “OK” button to enter into Crack procedure

Instruction of 46 Chip Copy-3.png
Step 4:Insert the Original key into ignition, meanwhile keep the signal coil of the clone machine near to the ignition coil, turn on the ignition lock to collect the data(If you use the smart card, put the signal coil of the clone machine near the ignition before insert the key)

Instruction of 46 Chip Copy-4.png
Step 5:If it shown “Collect ok, crack now?” on screen, you have successfully got the data from the car, just press “OK”

Step 6:Put the OEM key into signal coil to decode.

Instruction of 46 Chip Copy-5.png
Step 7:If it shows “Crack ok” as above picture shows, then decoding OK, the key security code have been calculated.

Step 8:Put clone chip into signal coil area, press “OK” to copy.

Step 9:It shows “Copy OK” as above picture shows. If you want to copy more keys, just replace new chip and press ok as step 8. If finished copy, press left button to quit.

Read and write 46 chip with CBAY Handy Baby Key Programmer
1. Please select correct chip mode and password in order to read & write chip correctly. The device default chip mode and password is 46 chip blank.
2. Select chip mode: move mouse cursor to "Mode", I.E "Plaintext mode", press "OK", the fonts turn black from white to indicate the selection mode, press "Up" and "Down" to select the Plaintext mode or password mode.
3. Enter password: move cursor to the password box under the mode, press "OK" to proceed, press "Up" and "Down" to select the data (0`F), press "Left" and "Right" to transfer password.
4. After finish press "OK"to exit, then move cursor to "Read all" to read out data.
5. Read all: read out all data for 46 chip and display the status of locked or unlocked.
6. Write: write the corresponding data; make sure 46 unlocked before writing data.
7. Enter data: the way to enter data is as the same as to enter password.

11:00 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


How to change the language for VDM UCANDAS

UCANDAS VDM is the best OEM-level diagnostic products, With it, you can read data stream, reading and clearing of diagnostic trouble codes, component activation and immobilizer key coding and so on.

VDM UCANDAS support multi-language,including English,German,French,Spanish, italian,Farsi,Portuguese,Japanese,Chinese Traditional,Chinese Simplified,Czech,Hungarian Arabic,Russian Global Edition,Finnish,Korean,Turkish,Vietnamese, Dutch

But Default language is English, if you need other language,how to change the language for VDM UCANDAS to the one you want?

1) If you need other language beside english, when you get the tool, please send your serail number and language to us, we will open the authorization for you.


2) After software authorization is opened. Then follow our software update video to download and install the update tool and other software
how to install WIFI UCANDAS full system VDM/OEM Automotive Diagnosis System

how to update WIFI UCANDAS full system VDM/OEM Automotive Diagnosis System

3) If you have doubts for language changing, here is the instruction for the video:
a. First you will see to go official website to download the update tool.
b. After you get the notification of your software language is opened. Install the update tool and connect VDM to PC. After PC read the VDM machine, Click update.

[This is the downloaded update tool]

c. You will enter the interface needs you fill in your information. Then register your information. (Keep remember these information, if you use wrong register information to log in the official website in the future, it will meet error prompt)

d. In the upper right corner of update interface, after your software is opened ready, you can choose the language you want to download. Then your car software will be downloaded and installed as the language you choose. (This language is for car software. Attention: Language for Car model software and software operation menu is different. Do mot garble it. Only this two language are the same, it will display the car model. Otherwise it will not show any car model after download.)

e. Back to the update tool, you will see the operation language menu. Setup this language to the one you want. Then all the language will be set to the one you want.

[language setup on update tool]

[Click this update menu, then you will enter update interface]

f. There are two uses for update tool: if you do not have the car list, then it is the update tool. After you download the car software and install it ready, then it is the diagnose software.

10:37 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


XTOOL EZ300 Four System Diagnosis Tool user guide

Original Xtool EZ300 is a high-end and new style auto diagnostic scan tool developed based on Android system.EZ300 provides engine, ABS, SRS, transmission and TPMS diagnosis for most US, Asian and European makes.

Xtool EZ300 Diagnosis System-0

Here are some information about the use of XTOOL EZ300

1.EZ300 Activation
1.1. Please activate EZ300 before you use it to test vehicles.
Xtool EZ300 Diagnosis System-1
1.2. Connect to WiFi first. Input activation code, product serial number (each device will have a serial number and activation code), nickname (workshop’s name or user’s nickname), login account (can be your email address or cell phone number) and password, then system will remember it. Activation only needs to be done for the first time, and you never have to do it again. The diagnostic interface will come up after activation.
Xtool EZ300 Diagnosis System-2
2.EZ300 Main Interface and Functional Buttons Descriptions
2.1. Main Interface
Tap on EZ300 application, the main interface and sub-menus shows up as below.
Xtool EZ300 Diagnosis System-3
2.2. Sub-menus and Function Buttons
Xtool EZ300 Diagnosis System-4
2.3. Toolbar Function Buttons
Xtool EZ300 Diagnosis System-5
3.Vehicle Connection Diagnosis
3.1 Wireless Connection
a. Connect cables and VCI to the vehicle as below:
Xtool EZ300 Diagnosis System-6
b,Switch on the ignition and turn on EZ300 tablet, then tap on EZ300 application to test vehicles.

3.2 How to pair Bluetooth
a. Connect VCI box with the main test cable, then connect main test cable with OBD2 16 Pin connector or other connectors, then plug into DCL port .
b. Do not connect the EZ300 Tablet with VCI box via the USB cable. The Bluetooth will be paired automatically between EZ300 tablet and VCI box. c. Switch on the ignition and turn on EZ300 tablet, then tap on EZ300 application to test vehicles..

4.1. Menu Options
4.1.1. After VCI box connected to vehicle and paired with EZ300 mainframe via wired or wireless means, diagnosis can be performed now. The diagnostic interface comes up as below.
Xtool EZ300 Diagnosis System-7
4.1.2. Users can choose menu based on their actual needs: selection for Europe means entering European cars menu, selection for Asia means entering Asian cars menu, selection for America means entering American cars menu, selection for China means entering Chinese cars menu. Users also can input vehicle model to search.

4.2. Test Functions 4.2.1. Take Volkswagen car for example, select Diagnosis, then select Europe Car, users can see Volkswagen’s logo. If the logo has not been seen, please swipe up and down or enter the car model to research.
Xtool EZ300 Diagnosis System-8
4.2.2. Toolbar function buttons descriptions
Xtool EZ300 Diagnosis System-9
Record data feedback button as shown below, showing diagnostic software version and various information in the diagnostic process.
Xtool EZ300 Diagnosis System-10
4.3. Read ECU
Xtool EZ300 Diagnosis System-11
4.4. Read DTCs
Xtool EZ300 Diagnosis System-12
Tip: In the process of diagnosis, if the device shows “System is OK” or “No Trouble Code”, it means there is no related trouble code stored in ECU or some troubles are not under the control of ECU, most of these troubles are mechanical system troubles or executive circuit troubles, it is also possible that signal of the sensor may bias within limits, which can be judged in Live Data.

4.5. Clear DTCs
4.5.1. Return to the previous step, select Clear DTCs to clear current and historical trouble codes memory in ECU. Performing this function will clear all the current and historical trouble codes. Make sure whether the trouble codes have been recorded before clearing, shown as below.
Xtool EZ300 Diagnosis System-13
4.5.2. Click YES to make clear confirmation, if the communication is normal, it will show “Trouble Codes Successfully Cleared” or “Trouble Codes Cleared”. Generally, users need re-read trouble codes after cleaning them to confirm whether the trouble codes have been cleared.

4.6. Read Live Data
Xtool EZ300 Diagnosis System-14
Select enter Settings; users can set the language, unit and other system related options: Languages: select the language. Please tick the needed option from multi-language options on the right.
Xtool EZ300 Diagnosis System-15
Units: Select unit of measurement. Users can tick Metric or English measurement.
Xtool EZ300 Diagnosis System-16
Bluetooth : Turn on Bluetooth and search the device, select EZ300, then pair it.
Xtool EZ300 Diagnosis System-17
Xtool EZ300 Diagnosis System-18
System Settings: Android system setup, such as wireless, audio frequency, light sensation, etc.

EZ300 doesn’t need insert a card for updating, users only need to tap on EZ300 application and click UPDATE , shown as follows.
Xtool EZ300 Diagnosis System-19
Report is for checking the saved files, such as the report of Live Data or Trouble Codes or pictures generating in the process of diagnosis, users also can know what cars have been tested. It includes three parts: PDF Files, Pictures and Data Playback.
Xtool EZ300 Diagnosis System-20
7.1. PDF Files: PDF files are the diagnostic reports of Live Data or Trouble Codes in the process of diagnosis. Entering PDF can check various diagnostic reports.
Xtool EZ300 Diagnosis System-21
7.2. Data Replay: Data Playback can check what cars have been tested and play recorded Live Data & freeze frame.
Xtool EZ300 Diagnosis System-22
In the maintenance process, when maintenance technicians encounter problems and don’t know how to solve, they can open this application and ask for remote assistance. How to get remote assistance from Xtool Technical Assistance Center
a. Open EZ300
b. Click Remote and open TeamViewer interface. Generate and display device ID.
c. Your partner also need download and install TeamViewer complete version. d. Enter your partner’s TeamViewer ID and send remote request. The system will pop up a window and allow your partner to control yours, and then remote control begins.
Xtool EZ300 Diagnosis System-23

05:17 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)