topblog Ivoire blogs

07/07/2016

Xprog-m v5.5 & Xprog box v5.6, which better?

Xprog m v5.5.5 nowadays is updated to Xprog-m box 5.6.0. And some differences definitely gonna happen, like some new chips and functions are newly added to Xprog v5.6.

all versions of Xprog m from v5.0 to v5.6:
Xprog-m v5.0 Xprog v5.3 plus xprog 5.5.5 xprog box v5.60

xprog-m-xprog-box-v5.0-5.3-5.5-5.6.jpg

For detailed differences, refer to
http://obd2-diag.blogspot.com/2016/03/difference-among-xp...

Here goes the key point- NEWS in Xprog m 5.60

New chips are added to XPROG M BOX v5.60

New-Chips-for-XPROG-M-BOX-5.6-1.jpg

New-Chips-for-XPROG-M-BOX-5.6-2.jpg

New-Chips-for-XPROG-M-BOX-5.6-3.jpg

More functions in XPORG box 5.6.0

XPROG-M-BOX-V5.60-new-functions-1.jpg

XPROG-M-BOX-V5.60-new-functions-2.jpg

XPROG-M-BOX-V5.60-new-functions-3.jpg

XPROG-M-BOX-V5.60-new-functions-4.jpg

XPROG-M-BOX-V5.60-new-functions-5.jpg

XPROG-M-BOX-V5.60-new-functions-6.jpg

XPROG-M-BOX-V5.60-new-functions-7.jpg

XPROG-M-BOX-V5.60-new-functions-8.jpg

XPROG-M-BOX-V5.60-new-functions-9.jpg

XPROG-M-BOX-V5.60-new-functions-10.jpg

http://www.mileageprogrammer.com/

04:53 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

06/07/2016

Change BMW F10 Werte Values with E-sys ENET cable

BMW E-sys is the best coding software for F-series,Have succeed to change BMW F10 Werte values with ENET E-sys cable,Here is the step-by-step instruction of changing BMW F10 Werte values with ENET E-sys cable,share the experience with you all!

The following detailed description is from BMW Forum.

Tool needed:
BMW ENET (Ethernet to OBD) Interface Cable
E-SYS software version 3.22.5
PSdZ Data V49.4
A laptop running Win XP home

Instructions:
1.Connect the ENET (Ethernet to OBD) cable with vehicle via OBD socket
2.Wait until LAN network adapter in task bar has established limited network capacity
3.Open ZGW-SEARCH.exe
4.Open E-sys software
5.Click the connection icon
6.Select your F series model, selection Connection via VIN and click continue
7.Follow system prompt. Click “Read(VCM)”
8.Select CADF with a green check mark file under the module you want to read, select “Coding Read Data”
9.Close error report windows pops up
10.New option under CADF, a folder. Expand the folder and right click the file, select “EDIT FDL”
11.Browse the folder, you will find your option, for example KOMFORTSCHLIESSUNG-FB
12.Factory option set to nicht-active. Right click, select “Edit”
13.Then click werte value, click “Edit”

enet-cable-f-series (1).jpg
14.The option to change the value in the lower window. Change current value with new, click the button on the right

enet-cable-f-series (2).jpg
15.Change werte value==00 to werte value==FF, save settings

enet-cable-f-series (3).jpg
16.Open same file under “File Name”. It shows file name and location

enet-cable-f-series (4).jpg
17.The E-SYS software display new value name and werte value

enet-cable-f-series (5).jpg
18.Save settings
19.Right click FA, select “Activate FA”
20.Select CAFD file you just edited and select “CODE DFL”
21.When DFL coding completed. Close the error report windows.
22.Werte value changing procedure now is completed.
23.Exit the BMW E-sys software and disconnect the ENET interface from vehicle.

05:44 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

05/07/2016

Both SD connect c4 & Autel MS908P can do Benz SCN coding - SUCCESS

It’s verified that both professional SD connect c4 for Mercedes and Autel MS908P full diagnostic system can perform online SCN coding for Benz vehicles. So, which one is better for Mercedes vehicles? Here, you can learn the differences of SCN coding using MS908P and sdconnect.

Part 1 - Autel Maxisys pro MS908P performs online SCN coding:

Note: SCN coding via MS908P only support Mercedes cars, not trucks, buses...
No need purchase extra coding service

Correctly connect Autel MS908P to J2534 ecu programming device and Mercedes
start MS908P
select Diagnosis

Autel-MS908P-Mercedes-SCN-coding-3.jpg
select Europe->Benz

Autel-MS908P-Mercedes-SCN-coding-4.jpg
diagnostic program initializing...
select Automatic selection
turn ignition on
reading VIN...
acquire VIN info
select date of manufacturer: as of 12/2015
please select the steering
here, press button Right to select right-hand steering
confirm vehicle info
go to Programming

Autel-MS908P-Mercedes-SCN-coding-12.jpg
system data loading...
diagnostic system initializing...
select ME-SFI-Gasoline engine control

Autel-MS908P-Mercedes-SCN-coding-15.jpg
diagnostic system initializing...
select Control Module programming, but no newer control module software was found

Autel-MS908P-Mercedes-SCN-coding-17.jpg

Autel-MS908P-Mercedes-SCN-coding-18.jpg

Autel-MS908P-Mercedes-SCN-coding-19.jpg

Autel-MS908P-Mercedes-SCN-coding-20.jpg

Autel-MS908P-Mercedes-SCN-coding-21.jpg

Autel-MS908P-Mercedes-SCN-coding-22.jpg

Autel-MS908P-Mercedes-SCN-coding-23.jpg

Autel-MS908P-Mercedes-SCN-coding-24.jpg
then go to SCN coding

Autel-MS908P-Mercedes-SCN-coding-25.jpg
Bluetooth stops when online coding
enter VIN as a 17-digit code
two steps to perform SCN coding
- step 1 Get SCN data from Server
- step 2 Perform SCN coding

Autel-MS908P-Mercedes-SCN-coding-28.jpg

Autel-MS908P-Mercedes-SCN-coding-29.jpg

Autel-MS908P-Mercedes-SCN-coding-30.jpg

Autel-MS908P-Mercedes-SCN-coding-31.jpg

Autel-MS908P-Mercedes-SCN-coding-32.jpg

Autel-MS908P-Mercedes-SCN-coding-33.jpg

Autel-MS908P-Mercedes-SCN-coding-34.jpg

Autel-MS908P-Mercedes-SCN-coding-35.jpg
Mercedes SCN coding success!


Part 2 - SD connect c4 does SCN coding:

Note: coding by SD connect c4 supports all Mercedes vehicles (cars, trucks, buses,etc.)
you should buy online coding service for coding with Super MB STAR C3 or MB SD C4

Check the connection of SDconenct c4 mux, laptop and car in a proper way
Then start the laptop, sdconnect and turn ignition on
Open XENTRY

xentry-scn-coding.jpg

Enter user ID and password to log in.

ETC-scn-coding-SD-CONNECT-C4-1.jpg
Communication with control unit EGS2...

ETC-scn-coding-SD-CONNECT-C4-2.jpg
Data are being determined...
The coding is carried out...

ETC-scn-coding-SD-CONNECT-C4-3.jpg
Data are being determined...
Wait 3 seconds...

ETC-scn-coding-SD-CONNECT-C4-4.jpg
Switch ignition off

ETC-scn-coding-SD-CONNECT-C4-5.jpg
Wait 5 seconds...
Switch on ignition
Control module reset, please wait...
CVN The value is calculated internally by the control unit
Wait 100 seconds...

ETC-scn-coding-SD-CONNECT-C4-6.jpg
Data are being determined...
Documentation for repair order WDBNG70J25A457136
The SCN coding sequence has been completed successfully.

ETC-scn-coding-SD-CONNECT-C4-7.jpg
Click YES to close the file without making a printout.
Data are being determined...
Communication with control unit ETC...

ETC-scn-coding-SD-CONNECT-C4-8.jpg
Go to SCN coding

ETC-scn-coding-SD-CONNECT-C4-9.jpg
Select Fault codes

ETC-scn-coding-SD-CONNECT-C4-10.jpg
No fault code present

ETC-scn-coding-SD-CONNECT-C4-11.jpg
Done!

08:43 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)