topblog Ivoire blogs

10/10/2016

(solved) Obdstar X300M communication failed on some models

Here are some Obdstar X300M solutions of unsuccessful odometer correction on some models. Enjoy!

 

Error message may be like that:

X300M Error message info

If you find that some models cannot change mileages, please follow the steps below:

 

1 Power On X300M unit -> Start -> System Settings -> Data Log -> On -> ESC Return to Main Menu;

2 when matching vehicles in the list, but X300M pops up the error message communication failure, please unplug the machine;

3 unplug the TF card, which the root directory LOG folder

4 send folders in the document to http://www.obdexpress.co.uk/, engineers there would help analyze the problem

 

Note! Every time you unplug the x300m machine, the data record will automatically be turned off. So, if you want to save the data the next time , you need to follow the above steps to re-open the data record

 

source:http://www.mileageprogrammer.com/obdstar-x300m-fail-on-so...

06/10/2016

How to solve Xprog-m v5.5.5 “verify error”

Here are important tips for all xprog users when they got this problem "verify error" during reading motorola mcu, and after try several time is read maybe.
Xprog software used:

Usually two xprog with same problem v5.45 / v5.55

 

The MAIN reason & solution:

Xprog version 5.5.5 is not so stable, find download 5.5.1 and downgrade it, its the most stable for clones available

 

Possible reasons and solutions:

- Internet issue

Reinstall on fresh PC, and don’t connect that to internet!!! Internet off.. then rewrite firmware v555

 

- power supply problem

Check power supply to xprog

 

- virus problem

Only fresh OS and fresh software, directly from disk or from safe link...doesn't mater if internet is on or off...etc
Only virus problem...tested 1000%

 

Free download Xprog-M 5.5.1:
https://mega.co.nz/#!CYIx2A6a!T5s_8eLwA5Y6AuPjc1l5E6yKCbI...

 

Xprog 5.5.1 update steps:
1. Erase chip atmega 64
2. Program eeprom , Flash
3. Set Lock bits and fuse bits. Program lock bits, fuse bits.
4. Copy Xprogbox 5.51 to C: and run Xprognew.reg
5. Run XprogDesktop.exe and update .

 

Here are some Xprog users feedback when tried to downgrade to v5.51

*1

I had same problems today with 5.5.5, after few weeks i've got verify errors on motorola and 5p08c eeprom . What i did was deleted xprog folder (it was without instalation without dongle), go into registry editor (win xp) search for "xprog" deleted all registry keys with that tag and again copied clean folder (instalation) of xprog software and it worked. Also i disconected internet connection before everything.

*2

I had the same problem,with 555 firmware, reading always different data, but sometimes correct,just sometimes.I back to 551 firmware and reading now without problem,may be need some hardware modification

*3

had same story with 5.5.5 downgraded to 5.5.1 and used no dongle software with new usb cable and now all running smooth it was ver 5.5.3 with dongle when i got it so i want up up and back down 5.5.1 is stable and no problems

 

Tips to avoid Xprog “verify error” issues:

older versions (lower than v5.55) are favorable now, without “verify error”:

Xprog 5.50x-prog-box-ecu-programmer-xprog-m-cas4-5m48h-cd-1

http://www.obdexpress.co.uk/wholesale/x-prog-box-ecu-prog...

Xprog-m v5.302012-newest-version-xprog-m-plus-with-dongle-as-1

http://www.obdexpress.co.uk/wholesale/2012-newest-version...

 

 

Original:http://blog.obdexpress.co.uk/2016/10/06/xprog-m-v5-5-5-ve...

26/09/2016

Grand Vitara Odometer correction scanner OBDSTAR F109

OBDSTAR company released a new item special for SUZUKI with Immobiliser and Odometer Function--OBDSTAR F109

it is appropriated for calculating 20-4 digit PinCode,programming Auto Keys and
Correcting Mileage of a part of SUZUKI vehicles,such as  Grand Vitara.It's easy to take away,and it's appearance is designed elaborately.
The main unit system adopts ARM high speed chip to keep it running fast, stable and anti-jamming.
Upgrade via TF card at any time.

Software update Free update for 1 year

Language:English

What can obdstar f109 do ?

1. Support to calculate 20-4 digit PinCode cars.
2. Support to read 20-8 digit PinCode automatically.
3. Program Keys for most of SUZUKI.
4. Correct odometer for SUZUKI cars.
5. No need to connect with computer, plug and play, automatic transfer.
6. No need to buy tokens.
7. One Key Upgrade
8. Have good man-machine interaction.

Kindly note:

Correct odometer for SUZUKI cars ,but not for all.

 

SUZUKI PinCode Calculator F109 Models Included

Odometer Adjustment
Grand Vitara
Type 1 D70F3421
Type 2 D70F3422
Kizashi D70F3422

PIN Calculator
20-4 digit PinCode
Immobiliser
Select from vehicle
SX4
Swift
India
12-16
06-10
Other
05-
96-04
Alto
03-
Type 1
Type 2
96-02
Vitra
Type 1
Type 2
Type 3
Type 4
Liana
Alivio
Baleno 96-01
Grand Vitara
Wagon R
Jimny
Ignis
RIZT 07-15
BREZZA
Select from type
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Type 7
Type 8
Type 9
Type 10
Type 11
Type 12
Smart key system
Alivio
S-CROSS
Vitra

item picture:

obdstar-f109-pin-code-calculator-suzuki-1

source:http://www.mileageprogrammer.com/grand-vitara-odometer-co...