topblog Ivoire blogs

14/02/2017

Honda HDS Key Programming with HDS HIM diagnostic tool

To add one new key/Keyless transmitter, you need:
1. Immobilizer Mater Key Blank or Immobilizer Valet Key Blank 
2. One programmed ignition key (master or valet) for the vehicle
3. Vehicle key code
4. PCM code
5. Honda HDS HIM diagnostic tool with immobilizer programming software
 HDS 3.101.015 (!! cheap honda hds cable only for diagnosis)
The HDS is required for registration of the immobilizer keys. Programming the immobilizer also programs the keyless transmitter.
Use the HDS with Honda key blacks to add a key or keyless control unit, storing the transponder code of the new key in the memory of the control unit.
6. Condor XC-MINI key cutting machine

NOTE:
Make sure the market, the date, and the time on the HDS setup screen are correct. 
Select the F12 key in the upper right corner to get the Set-up Details screen.
Make sure Market is set to USA. 
Select the time display in the lower right corner to get the Date/Time Properties pop-up window.
 
How to program a new key to Honda with Honda HDS scanner:
1) Use an appropriate key blank and the key cutting machine to cut a new ignition key.
2) Connect the Honda HIM diagnostic system with vehicle via OBD socket 
3) Insert a programmed ignition key into the ignition switch 
4) Turn ignition ON
5) Run Honda diagnostic system personal computer (pc) software and come to iN screen 
6) At the screen prompts, enter the VIN and the odometer reading, then verify the correct date and time.
7) Select “IMMOBI” from “System Selection” Menu
8) Select “Immobilizer Setup” from “Immobilizer Test Mode” Menu
9) Select Add and Delete Keys 
10) Select Add 1 Key 
11) Select Begin to Add 1 Key 
12) Follow the HDS screen prompts, if your HDS is not logged in to the iN, you willhave to enter the PCM code you have retrieved from the iN Immobilizer Code Inquiry to proceed. 
13) When adding keys procedure completed, turn ignition OFF
14) Exit HDS software and disconnect Honda HIM HDS scan tool from the vehicle
 
 
P.s. This is the Honda HDS pocket tester in use.
Honda-HDS-Key-Programming
Honda-HDS-Key-Programming
 

07/02/2017

Which tool can change mileage on Kia Sportage

How to do Kia Sportage 2016 odometer/ mileage program?
Here we have collected three methods for your reference.
Tools advised:
Option 1: obdstar x100 pro or X300M mileage correction tool
Feedback: obdstar X100 pro works ok on:
obdstar X100pro or X300M 100% OK
x100 OBDSTAR:KIA ECO sportage change TYPE I work ok!
Kia Sportage with 24c16 2012 work perfect
Kia sportage 2013 round dash screen obd success
Kia sorrento 24c16 al ok obd
Kia soul also as kia ceed goes ok…. also did ML W164 obd ok. After recalibration remove fuse or batterry for 5 sec and ok
Kia Sportage 2013 24c16 via obd2 ok
kia Sportage 2014 D70F3536 via obd2 ok
kia sportage r 2014 d70f423 mileage tested ok
KIA RIO 2016 —— OK
Kia rio 2015 obd ok
Kia Sorento is OK, Renesas 2013
OBDSTAR engineer test x100 pro ok on:
(PS: browse http://en.obdstar.com/testcarmodel.aspx click “X-100 pro / Key Master” – “Odometer Mileage” – “Other models V30.57”, press “Ctrl+F” to search Kia, you can see the testable list as below:
Kia
Ceed
24C16
D70F3423
K4
K5
24C16
D70F3423
D70F3536
KX5
D70F3536
Magentis 24C16
Optima
24C16
D70F3536
Rio
24C16
2015 D70F3423
Sorento
24C16
D70F3423
D70F3536
Soul 24C16
Sportage
24C16
D70F3536
Sportage R
24C16
D70F3423
D70F3536
obdstar-x-100-immo-odometer-obd--eeprom-adapter-c-d-type
obdstar-x300m-odometer-adjust-obdii-2
Option 2: Dp3 digiprog 3  enigma dashcoder smelecom
Feedback: On the dp3 it didn’t work 2016- yet works spot on 2015- menu
43976-digiprog-iii-3-digiprog3-odometer-master-programmer-cd-h-1
Option 3: original carprog
Feedback: I have do more cars with original carprog work ok, read nec ok and change odometer.
carprog-full-new-firmware-online-1

Source:http://www.mileageprogrammer.com/reviews-on-kia-sportage-...








www.obd2eshop.com 

19/01/2017

Creator User Manual Of How To update Software

Here I will tech you how to update Creator products (incl Creator C500,C310,C330, C100,C110 etc) step-by-step here .

 
Note: This Update method is applicable to all Creator products!

Here is the procedure:

Step 1. Setup Update tools

Download the update tool from official website:www.szcreator.com 
creator-products-software-update-1
Double click the [Setup file] to setup the tool. Operate follow the instructions, and finish to setup.
After finish setup, there will be a icon of scanner in desktop.
creator-products-software-update-2
 

Step 2. Download the software

Download from official website
creator-products-software-update-3
Note: C100 and C110 software is only fix SN is C1XX 002000 02 or later
creator-products-software-update-4
You can find the software what you want.
 

Step 3. Run the update tool

Double cleck the update tool icon and Run the update tool and Operate in accordance with photographs
creator-products-software-update-5
Used the USB cable connected to scanner and PC, if connect success, the software on pc will shown as below

creator-products-software-update-6
Click [Update] button.

creator-products-software-update-7
Cleck red rang , you can change the path , and find the updatefile which recive.
creator-products-software-update-8
Select update file and click [open] button.
Into the upgrade interface, wait for the end of upgrade
WARNNING:
Do not power off during upgrade!
Do not Plug or Unplug USB tools during upgrade!
 

Step 4. Start Update

Waiting for a few minutes. The software will update the scanner tool.
creator-products-software-update-9
Finish Update.
When the update is finished , the screen on PC will show as below.
creator-products-software-update-10
If update success, the software will display [Update success!];
if update fail, it will display [Update fail! Try again].
Press [finish], the scanner is already updated, and you can unplug the scanner from PC.
 
This article is from the leading online exporter of OBD2 Scanner:http://www.obdexpress.co.uk/service/creator-products-soft...