topblog Ivoire blogs

21/02/2017

Correct Mileage In BMW,Xprog Or R270/260?

I’m often reading about Xprog, R260 and R270. Whats the deal about these tools?

I tried so search and read about these tools but this confused me. Can someone explain me short and effective the difference and pros/cons about these tools? Maybe this could be a good sticky for new users.

My goal: correct mileage in BMW from 2000 until at least 2010.

Here is all i found in the CT community. Big thanks to all contributors!! I benefit a lot from this.

Xprog is a universal programmer for various chips in automotive and many more…

R270/260 is based most on BMW and MB immo systems+dashboards+some airbags..it have function for erase 35080/35160 chips too…

both are very good programers and you need them both in this busines..

1 tool is not enough
R270 have the advantage to clear m35080 eeprom
R260 is more safe in MCU
Xprog is a good tool for many chips and mcu
all are Chinese
if you can pay more, i suggest you to buy VVDI Prog 

Among ecu programmers, vvdi prog should be the best choice because

  1. faster to clear 35080, 080D0, 160D0 (within 10S)
  2. more stable than Xprog-m to read MC9S12 series chips
  3. faster to attack MC9S12series chips
  4. less error than others to read some EEPROM that Orange 5 fail to recognize
  5. with voltage attack function for use
  6. with CAN bus, K-Line for use

Also, most tools from china are clone while this VVDI Prog is made in the Xhorse company where produces vvdi tools. So, the quality definitely is no issues i think. See the PCB in mine.

VVDI-PROG-circuit-board

Here is XPROG-M, Carprog v8.21, R270 – read & erase BMW EEPROM M35080
. Wish this helps someone.

source:http://www.obdexpress.co.uk/service/correct-mileage-in-bm...

16/02/2017

Read / write / save BMW CAS4 Via VVDI PRO Step Guide

Here is a tutorial of using xhorse VVDI PRO programmer to Read / write / save BMW CAS4 with highly secured MCU MC9S12XEP100 Masked as 5M48H inside

Main step guide below:

Open VVDI Prog software, select type, manufacture and model as MC9S12XEP100)

Click "Wiring Diagram"

Maximize wiring diagram: right click and select "zoom window", then pull down window.

Follow the wiring diagram to connect CAS to the VVDI Programmer.

Start to connect the cable.

The left zone is done, next is to do the right zone.

In this wiring diagram, it only need to remove one 0 ohm resistor to read out data, but one CAS ECU structure is different another one, some needs remove more electronic parts; we will show how to do in the other videos.

Next is to remove this 0 ohm resistor.

Wiring is done, 0 ohm resistor is removed

Plug adapter into VVDI Pro.

Close wiring diagram.

Select "New" – " Read"

You see it is reading data very fast.

Reading data successfully, click "Save"

Next is to check data.

Open the data, drag the mouse to check, okay, data is all read out, close it.

 

Attach photos of the reading procedure

How to read / write / save BMW CAS4 via Vvdi Prog programmer


How to read / write / save BMW CAS4 via Vvdi Prog programmer


How to read / write / save BMW CAS4 via Vvdi Prog programmer


How to read / write / save BMW CAS4 via Vvdi Prog programmer


How to read / write / save BMW CAS4 via Vvdi Prog programmer


How to read / write / save BMW CAS4 via Vvdi Prog programmer


How to read / write / save BMW CAS4 via Vvdi Prog programmer


How to read / write / save BMW CAS4 via Vvdi Prog programmer


How to read / write / save BMW CAS4 via Vvdi Prog programmer

 

Enjoy!

 

 

15/02/2017

VVDI MB Tool exchange W204 ESL without renew EIS

 Vvdi mb tool 2.1.6 update info about W204 esl:

Exchange W204 ESL without renew EIS. In ESL Tools, write EIS with password(Select Auto clear TP and personalized)

 

Note: vvdi mb tool 2.1.6 download

 

For users with the vvdi mb bga tool:

As for w204 Faulty ESL unlock and renew all works fine + when rematching to EIS there is no need to Get Erase Pass or Renew EIS any more since the latest update (v2.1.6),just get Key Pass and paste it to the EIS dump close go to ESL use Load Vvdi ESL Data + tick Auto Clear TP + Write all set to go.

 

detailed screen shot in the post below

Vvdi mb tool 2.1.6 update info about W204 esl






 

source:http://www.obdexpress.co.uk/service/vvdi-mb-tool-exchange...