topblog Ivoire blogs

20/04/2015

Benz MB SD Connect C4 Star diagnostic DAS SIM error solution

With Mercedes Benz MB STAR diagnostic DAS simulation software, you are able to practice around the options, and it gives failures in all systems, so that you can look into problems that do not exist on your own car remotely. Here is a DAS SIM error and solution provided to avoid further damage.

 

Problem:

When run MB SD Connect C4 DAS SIM (simulation) software and try to do a simulation for Mercedes Benz trucks, the SDS displays an error message "simbasepath not found in cal.ini" and then shows another error "program argument for no category" (see the error picture below)

mb-star-xentry-simulation-error.jpg

Solution:

Browse and locate:

F: / programme / DAS / bin and open cal.ini

The folder should include following contents and add the black line between as shown below:

 

PATH]

DRIVER =. Driver

CBF = .. comdat

CFF = .. comdat

CFG = .. comdat

SIM = .. comdat

CCF = .. comdat

CENTRAL_GBF =. Gbf

smart = .. smart

FLASH = c: userdata csd writefil flash temp

SLIBASEPATH = c: userdata temp

FLASHBASEPATH = .. comdat

 

SIMBASEPATH = c: userdata csd writefil sim

 

[REGISTRY]

UNIT_KEY = SOFTWARE DAS UNIT

UNIT_DISTANCE = REG_KM

 

[SERVER]

REPORT = 0

PLATFORM = PART_D2

TRACE_CONFIG = 0

CAESARMEM = 0

TOOLKIT = 1

CPULOADREDUCTION =

PASSTHRU_SELECT_ALLOWED = 0

CAESAR_DEBUG_LEVEL = 0

 

[PKWFehlerArt]

QUALIFIER = ENVTYPE_

 

[EvobusFehlerArt]

QUALIFIER = ENVTYPE_

 

[KW2N_HOURS]

QUALIFIER = ENV_Betrieb

 

[MONITORING]

MONITORING = ALL

MODE = DAS_CONTROLLED

 

[SHORTTEST]

; LOG_SHORTTEST_QUEUES = 1;

; WRITE_SHORTTEST_SUMMARY = 1;

 

Make sure the contents of the cal.ini should be exactly the same as above. If you find any difference, then modify it as necessary.

http://mbstarseries.webs.com/

05:34 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

18/04/2015

Super ICOM Newest V2015.05 Update Online

Super ICOM Software for BMW ICOM and ICOM A2 is now available to the newest V2015.05 via update online (Official website: www.supericom.com). Software installed based on Windows® 8.1 64-Bit OS, fitting most of the laptops or PC in the market with SATA port.

 

You are recommended to directly download Super ICOM Updater V1.0 updater tool for Super ICOM V2015.05 software online update. 

 

Note:

User Name is the Serial Number;

Password derives from the last 8 numbers of password envelop; 

Super ICOM Software.jpg

http://bmwicomseries.webs.com/

04:34 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

17/04/2015

New firmware KESS V2 OBD2 tuning kit Error solution

V2.11 KESS V2 Unlimited Token Version is the newest kess with Firmware V4.036. Support much more ecu list than old version. It has Unlimited token version,

Here is some error solution for KESS V2 that our customer meet when usage.

Problem:

Recent days, one of our customer use new V2.11 KESS V2 with V4.036 firmware, he find after 21 times the device is write locked, and All windows are gray He get error prompt "Caution:. Must have a programming in the next 9 Update done. Connect the device to the internet and they drove the update as soon as possible. "When you meet this problem, what should you do?

new-firmware-kess-v2-obd2-tuning-kit-error-solution-5330-des-1.jpg

Solution:

Never connect internet and update the tool when you use this k-suite software

1) Download this V2.11 KESS V2 With V4.036 firmware tokens reset program and tool program.

2) Follow the How to reset V2.11 KESS V2 With V4.036 firmware tokens video step by step. Then you will solve this problem.

Attention: Please use the software rightly Then you will not meet problem..

08:06 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)