topblog Ivoire blogs

24/04/2015

Newly Released V2015.03 Software for MB SD C4 with HDD

Obd2 Tools have recently released 2015.03 MB SD Connect Compact 4 WIFI diagnosis with HDD.

Exactly here comes with Big Promotion Sales, you indeed do not miss the chance.

Highlights to Get MB SD Connect C4:

1. Newest software version 2015.03; (Hardware version: OS: 2.3 CSD: 2.8)

2. Wireless and LAN cable connection supportable;

3. Multi-language: support over 20 languages;

4. Support Benz vehicle from 1995 to 2015;

5. Enjoy obdexpress.co.uk good after-sales service;

 

MB SD C4 has been proved to be the best diagnostic and programming tool for Mercedes Benz truck models.

 

MB SD C4 XENTRY Mercedes Benz Truck List:

Arocs (964), Antos (963), Actros (963), Actros2.3, Atego (967), Atego II, Axor II, Econic (956), Econic, Zetros, Actros, Atego Light, Atego Heavy, Axor, SK , MK, LK, ACCELO, LN, HSK, L 98, FPN M96, FPN M2000, HPN M96, Atron, HPN M2000, SKL, FSK and future more model series.

 

Except Benz truck, many other Benz vehicles are also supportable, such as Van, passenger car, Unimog and Bus, you can check the following link for detailed support lists:

http://www.obdexpress.co.uk/wholesale/mb-sd-connect-compa...

 

MB SD Connect Compact 4 also supports reading and erasing DTCs, reading real-time data of sensor and actuator and coding for Mercedes Benz vehicles.

 

How to Set IP for Benz SD Connect Compact 4:

For wireless:

Set IP for Benz SD Connect Compact 4-1.png

For Wired:

Set IP for Benz SD Connect Compact 4-2.png

http://www.mbstartool.com

11:41 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

How to use Lexia-3 PP2000 XS Evolution to Program New Keys for Peugeot

Lexia-3 PP2000 XS Evolution with Diagbox V7.57 is an auto diagnostic tool that supports read identification and read fault codes (for normal use) etc. for most of Citroen and Peugeot vehicles from 1995 to 2013, while here I would like to show you how to program Peugeot new keys with Leixa-3. 

 

Attention: PIN Code is required during key programming procedure. Record your vehicle PIN code first.

 

Procedure to program Peugeot new keys:

1.Install and activate Lexia 3 xs Evolution PP2000 V25 diagnostic software.

2.Select vehicle model 307 and wait until the well communication built.

3.Check the entering vehicle information.

program Peugeot new keys-1.jpg

4.Select the application as "Peugeot Plant 2000" and confirm it.

program Peugeot new keys-2.jpg

5.Select test by ECU;

6.Choose "Built-in systems interface";

program Peugeot new keys-3.jpg

7.The system is reading the ECU in progress, follow and accept the windows prompts.

8.Select "Learning" option under carry out the tests menu display.

program Peugeot new keys-4.jpg

9.Select "Programming of keys";

program Peugeot new keys-5.jpg

10.The system will display key programming procedure when activation process is completed. Confirm to continue;

11.Confirm Unlocking the E.C.U program;

12.Manually enter the "Confidential code" (PIN Code).

program Peugeot new keys-6.jpg

13.The system is verifying the PIN code.If the code is correct, the built-in systems interface is ready for programming of keys;

14.Enter the key number to be learnt. The number of keys to be programmed cannot exceed 5.

program Peugeot new keys-7.jpg

15.Follow the screen prompt to switch off the ignition

16.Then switch ignition to ON within 15 seconds.

program Peugeot new keys-8.jpg

17.Key programmed, switch off the ignition and take out the key.

program Peugeot new keys-9.jpg

18.Switch ignition ON again and insert the next key in the ignition. Repeat the key programming procedure to program another key. When complete programming, the system will display keys that are programmed.

program Peugeot new keys-10.jpg

19.Follow the screen instructions.Check the handbrake is on. For an automatic gearbox, check the gear level is in position "P". For a manual gearbox, check that the gear level is in neutral;

20.Follow the re-synchronies the HF remote controls procedure to operate until the "End of key programming procedure" notice displays. Exit the program.

program Peugeot new keys-11.jpg

PS:

Another Lexia-3 xs Evolution (SP08-D), while the Lexia-3 above is SP08-C;

 

What are the differences for SP08-C Lexia-3 and SP08-D Lexia 3?

1. SP08-C Lexia 3 is made by original chip. It is more stable;

2. SP08-C Lexia 3 support Peugeot 307 models, but not good for Citroen C5, while SP08-D Lexia 3 does Not support Peugeot 307 and Citroen C5;

3. SP08-D Lexia 3 has one more cable than SP08-C Lexia 3.

08:00 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

23/04/2015

How to generate Ford Mondeo DPF with the VCM 2 IDS diagnostics tool

Ford comes with activate DPF (diesel particle filter). Active regeneration of these DPFs is employed when the exhaust temperatures are too irregular for a passive system to regenerate consistently. Here is an instruction on generating Ford Mondeo 2005 DPF and recoding datastream with Ford VCM 2 IDS.

Tools needed:

Ford VCM2 IDS diagnostic system V86 / V91 / V94 (newest version)

A laptop running Windows XP mode

Well install Ford VCM ii software

Connect the VCM II diagnostic tool with vehicle via OBD port or WIFI wireless connection

Select function tab, then press Powertrain >> Service Functions >> PCM

ford-vcm2-ids-generate-dpf-1.jpg

Check the function option under "Service Functions" menu, then click "EXIT" to select item for more information. Press the Tick mark on the right bottom.

ford-vcm2-ids-generate-dpf-2.jpg

VCM IDS will display detail vehicle information, engine type, VIN etc

Select control unit tab, select Powertrain >> Engine

ford-vcm2-ids-generate-dpf-3.jpg

Turn ignition to ON position

Select Equipped or Not Equipped Air Conditioning: Equipped

Select Equipped or Not Equipped EGR system: Equipped

 

Then come to the following program, the gray icons are valid, press B + (VOLT) and FRT (TEMP) buttons to turn to gray.

ford-vcm2-ids-generate-dpf-4.jpg

You will be able to view the live data stream

ford-vcm2-ids-generate-dpf-5.jpg

ford-vcm2-ids-generate-dpf-6.jpg

Press the icon on the up right corner, select "Save recoding group", press the tick mark

ford-vcm2-ids-generate-dpf-7.jpg

Enter the Filename model year and engine "MONDEO 2005 TDCI"

ford-vcm2-ids-generate-dpf-8.jpg

Enter Description: "GOOD RUNNING CAR"

ford-vcm2-ids-generate-dpf-9.jpg

Select recoding to save: 1, press Tick mark

Exit the program

Select "DataLogger" function

ford-vcm2-ids-generate-dpf-10.jpg

Select Powertrain >> Engine

Check the file saved

View the datastream recorded

Exit the Ford IDS software program disconnect the VCM2 system

http://vcm2.webs.com/

08:48 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)