topblog Ivoire blogs

18/05/2015

Toyota Rav4 2013 Key, how to read these ImmoBox case

I try on toyota rav4 year 2014 X100+ key programmer with option G chip reset and add H chip without problem after 20 min for reset immo. 

 

But, someone has already programmed the key to this Toyota Rav4 2013. It uses the chip H someone how to read these ImmoBox case?

ImmoBox case-1.jpg

ImmoBox case-2.jpg

I ordered new immo box yesterday because no answer and I should deliver the car.

I have avdi but dont have yhe function TN005 but I think even x-100 or ck-100 key pro can add it if its new box. There is no chip 56r on the location ic4 it came empty.

 

Finally, I solve my problem before getting the new immo i put the immo of a rav4 2010 G-type and connect the ring of the old model also by wiring to the immo cuz ring of 2013 cant read the g type key and i did reset 5 and 13 and them start the car.

http://www.obdexpress.co.uk/wholesale/car-key-programmer/

08:06 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

15/05/2015

VAS 5054A Audi VW V2.2.3 ODIS software installation

VAG VAS 5054a Bluetooth diagnostic scanner ODIS software has upgraded to current V2.2.3 (2.23) version that works on Volkswagen and imported VW& Audi models. Following is the detail V2.2.3 ODIS installation instruction on Windows 7 operating system. 

 

Operating system: Win XP/Win 7 

 

1)Create new folder 

Open My Computer>>D://

Create a new folder and name it “audi-vw-odis2.2.3”

Copy “VW audi ODIS2.2.3.part1” setup and paste it to the new created folder 

Eject DVD Driver (F:) you will get VW audi ODIS2.2.3.part2, copy it to the new created folder 

Eject DVD Driver(F:) again, you will get AUDI-VW ODIS2.2.3 license and part3 setup, copy both of them to the new created folder 

Check the filer that contains these four files 

vas 5054a ODIS 2.2.3 software-1.jpg

Select AUDI-VW ODIS 2.2.3 part1.past2 and part3, extract them to a folder and rename the folder “ODIS 2.23”

Cut AUDI-VW ODIS 2.2.3 part1.past2 and part3 

 

2) Install vas 5054 ODIS setup 

Open My Computer >>D://>> “audi-vw-odis2.2.3”>> “ODIS 2.23”>> VWAUDIODIS 2.2.3>>dav>>Odis>>Trade-Wholesale>>software>>installation 

Copy ODIS-Sv2.2.3-RC320L-Setup to C://

Open and run ODIS-Sv2.2.3-RC320L-Setup on C://

Select software language 

vas 5054a ODIS 2.2.3 software-2.jpg

Follow system prompt to save file to disk C

Search license at D:// audi-vw-odis2.2.3//AUDI-VW ODIS 2.2.3-License//license//license.dat

vas 5054a ODIS 2.2.3 software-3.jpg

Install Microsoft Visual C++2005 

Finish installing Setup Wizard

 

3) Activate & Configure ODIS V2.2.3 software 

Open “AUDI-VW ODIS2.2.3 license” on D://, copy and replace “OffboardDiagLauncher” on the desktop

Open “OffboardDiagLauncher” on the desktop, copy hardware ID and send the activation ID to the related salesman for activation

vas 5054a ODIS 2.2.3 software-4.jpg

Paste the activation registration name and activation key from salesman, click Register 

vas 5054a ODIS 2.2.3 software-5.jpg

Configure data input. Click “Select local directly” and locate Local Disk D://audi-vw-odis2.2.3//ODIS2.2.3//dav

Enter User Name: abc and keyword, press continue button 

vas 5054a ODIS 2.2.3 software-6.jpg

Update check results 

Software is loading, you will be able to check the new software information

Exit the software main program 

 

4) Connect vas 5054a 

Connect VAS 5054a Bluetooth scanner with vehicle and computer 

Open My computer>>Device Manager>>Softing Vehicle Interface>>VAS5054, to check the well communication is built 

Open “OffboardDiagLauncher” on the desktop 

Select “Start diagnosis” on the main function menu 

Turn vehicle ignition to ON

VAS 5054a ODIS software will automatically detect vehicle information, select vehicle version and engine type to continue 

vas 5054a ODIS 2.2.3 software-7.jpg

Check the control unit 

 

5) Bluetooth matching 

Install device driver software 

Find out Bluetooth connection on the right bottom corner of the system 

Click Add a Device 

vas 5054a ODIS 2.2.3 software-8.jpg

Select VAS5054 interface to add to the computer 

Select the device’s pairing code 

vas 5054a ODIS 2.2.3 software-9.jpg

Bluetooth connection is well built, the device is ready to use 

 

6) Configure hardware 

Open ODIS Service Diagnostic Interface Configuration on the desktop 

Press Add EDIC button

Select EDIC to install VAS5054 from the drop down list 

vas 5054a ODIS 2.2.3 software-10.jpg

Select COM port as COM4

vas 5054a ODIS 2.2.3 software-11.jpg

Software installation procedure is complete, start to diagnose vehicle with vas 5054a ODIS 2.2.3 software 

07:54 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

14/05/2015

GM MDI GDS2 software Days Remaining until Lease Expires 3

GM MDI WIFI wireless multiple interface is the universal diagnostic tool for newer GM group. Some users reported that they came across GDS2 software expired or will be expired problem. Here is the proper solution provided. 

 

Problem: 

After hooking up WIFI GM MDI interface to diagnose vehicle for a period of time, the GDS2 software prompts a notice: “Days Remaining Until Lease Expires 3”. (Shown picture below)

GM-MDI-3-days-remainning.jpg

Solution:

Follow the GM MDI GDS2 software video or activation document below to activate the GDS2 software. The GDS2 software program will back to normal: Days Remaining until Lease Expires 6. 

 

How to install and activate GM MDI software video

https://www.youtube.com/watch?v=KRXqZ5sfCho

 

How to activate GM MDI GDS2 software?

ⅠChange computer time/date 

1) Run “leasetime” in the computer's start menu, if GDS2 is pre-installed

GM-MDI-GDS2-activation-1.jpg

GM-MDI-GDS2-activation-2.jpg

2) Click “Stop ALGM Service”, change data and time in “Date” and “Time” column. Make sure the date and time are correctly set. 

3) Check and confirm the “Leasetime” is completely consistent with the computer system time, if not same, please change your PC date and time. 

GM-MDI-GDS2-activation-3.jpg

4) Select the date and time of the time zone (Your local exact time )

GM-MDI-GDS2-activation-4.jpg

Ⅱ Activate GM MDI GDS2 software 

1) Connect your computer with network, browse to: http://tis2web.eicp.net:9080/tis2web/

2) Choose user account, then click “ok”

GM-MDI-GDS2-activation-5.jpg

3) Press “Continue”

GM-MDI-GDS2-activation-6.jpg

4) Click on “OK” button when the system display new Tech2 version.

GM-MDI-GDS2-activation-7.jpg

5) Click “OK”.

GM-MDI-GDS2-activation-8.jpg

6) Select “GDS2” Tab and then press on Run GDS2 button

GM-MDI-GDS2-activation-9.jpg

7) The system will install JAVA software automatically

GM-MDI-GDS2-activation-10.jpg

8) After installing the JAVA, the system will automatically lease renewal

9) After lease renewal, start MDI GDS software, the system will display the new lease the remaining days in the lower-left corner of software program. 

07:49 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)