topblog Ivoire blogs

21/05/2015

Pair vas 5054a ODIS Bluetooth and change Bluetooth PIN

VAS 5054A ODIS with OKI Chip for VAG group VW AUDI SKODA SEAT (support UDS Protocol) updated to the latest 2.23 with Bluetooth. Following are the instructions on pairing vas 5054 Bluetooth and changing Bluetooth PIN.

 

How to pair vas 5054a ODIS interface Bluetooth?

1.Connect vas 5054 cable into computer via USB port, wait the system to found “Found New Hardware”

vas-5054a-Bluetooth-pair-1.jpg

2.Double click the Bluetooth icon at the button corner of your computer. Then a dialog icon will appear below, click “Add”

vas-5054a-Bluetooth-pair-2.jpg

3.Click Next 

vas-5054a-Bluetooth-pair-3.jpg

4.Wait the system to detect Bluetooth device, select “vas5054

vas-5054a-Bluetooth-pair-4.jpg

5.Choose “Use the passkey found in the manual” and enter Bluetooth password, click Next 

vas-5054a-Bluetooth-pair-5.jpg

6.Installing Bluetooth device

vas-5054a-Bluetooth-pair-6.jpg

7.Adding Bluetooth successfully, click Bluetooth COM PORT, must be set to COM4 

vas-5054a-Bluetooth-pair-7.jpg

8. Pairing Bluetooth is completed. Click “OK”

vas-5054a-Bluetooth-pair-8.jpg

NOTE: 

 

How to check which COM port is assigned to my VAS 5054A?

If you are using the Bluetooth software supplied with Windows XP Service Pack 2, open the Bluetooth settings by selecting Bluetooth Devices in Control Panel. Click “COM Ports” tab where displays a list of Bluetooth COM ports. The outgoing COM port to the VAS 5054A is the one assigned.

vas-5054a-com-port.jpg

ⅡHow to change vas 5054a Bluetooth PIN?

The VAS 5054A OBD2 tool is delivered with the Bluetooth PIN preset to the 9-digit numeric serial number of the device. You need to change the Bluetooth PIN according to Volkswagen specifications before using the interface. The PIN must consist of at least 6 characters comprising letters and numbers (or special characters). 

 

1) Connect VAS 5054a interface with computer via USB or Bluetooth connection. Better to connect via USB. Choose the right COM ports you connected to. 

 

NOTE: 

If you do not know the PIN of the VAS 5054A ODIS, you cannot connect via Bluetooth. 

 

2) Click Start menu on windows. Select “Diagnostic Interface Configuration Utility” program 

 

3) The PIN protects Bluetooth devices from unauthorized access. When you change the PIN, you have to enter the new PIN in your Bluetooth software as well. The Bluetooth software will prompt you for the new PIN when well communication is built. 

vas-5054a-Bluetooth-PIN-1.jpg

08:13 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

20/05/2015

Detail BMW ICOM Firmware Update Guide with Pictures

The text here displays a detail instruction on updating BMW ICOM firmware. BMW ICOM diagnostic system with different ApplicationImage and BootImage shares the same update procedure. 

 

First all of, download Firmware bin file for ICOM A2/ ICOM A emulator 

 

Download ICOM ApplicationImage 01.37.00 bin

http://www.mediafire.com/download/2zt263k3e8bk3jk/ICOM-Ap...

ICOM BootImage 01.23.01bin 

http://www.mediafire.com/download/0bx54urau4d7p0r/ICOM-Bo...

How to update ICOM A or A2 firmware, pdf document free download

http://pan.baidu.com/s/1i3rEfVv

 

BMW ICOM Firmware Update Instruction:

1 First step is to make sure the LAN adapter is set to DHCP and is enabled, follow this way:

 

Click Start on the desktop to open Network Connection, then click control panel. In the search box, type adapter. Then click View network connection under Network and Sharing Center. 

 

Right-click the connection your want to change, click Properties, enter the administrator password or confirmation 

 

Click the Networking tab. Under This connection uses following items, click either Internet Protocol 4 (TCP/IPv4) or Internet Protocol 6 (TCP/IPv6). 

BMW-ICOM-firmware-update-1.png

The Network Connection Properties Dialog Box 

 

----To get IP settings automatically using DHCP, select “Obtain an IP address automatically”, click OK

----To get a DNS server address automatically using DHCP, select “Obtain DNS server address automatically”, click OK

BMW-ICOM-firmware-update-2.png

2. Connect BMW ICOM hardware with vehicle using UTP cable in the package.  Power up ICOM A2 with 12 V adaptor or connect it with vehicle via OBD diagnostic socket. 4 LED indicators should be on. 

 

3. Check that the network adapter has an IP like 169.254…

 

4. Browse to the web: 169.254.92.38:60080/

User name: root

Password: NZY11502

BMW-ICOM-firmware-update-3.png

5. Select Channel menu and click only once on the button available there 

BMW-ICOM-firmware-update-4.png

6. Go to firmware update and update with ICOM BootImage bin and then ICOM ApplicationImage bin, do not reboot between parts. 

 

Select ICOM-BootImage-XX-XX-XX.bin, set image type to "SYSTEM",

click "Send the file" and wait 

BMW-ICOM-firmware-update-5.png

Click on Yes and wait 

BMW-ICOM-firmware-update-6.png

Click “Update Firmware” button 

BMW-ICOM-firmware-update-7.png

Click the APPLICATION option and browse for ICOM-ApplicationImage-XX-XX-XX.bin, click on “Send the file” button and wait 

BMW-ICOM-firmware-update-8.png

Click Yes and wait 

BMW-ICOM-firmware-update-9.png

7. Reboot ICOM

BMW-ICOM-firmware-update-10.png

BMW-ICOM-firmware-update-11.png

8. After at least 2 minutes press on Home button and go to Update Firmware and check to see the firmware versions for boot is xx-xx-xx and application is xx-xx-xx. 

BMW-ICOM-firmware-update-12.png

Done 

 

NOTE: 

1)There are 2 firmware update files, first install the small file and choose “SYSTEM” correspondingly. Then install larger file, select “APPLICATION” instead.

2) The firmware file and method fits for BMW ICOM A1, ICOMA2 and ICOM.

http://bmwicomseries.webs.com/

08:40 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

19/05/2015

How to update and activate TM100 key programmer

TM100 is a universal auto key programmer that is able to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies. Following are the instructions on TM100 software activation, update and authorization online. 

 

1) Activating TM100 key programmer 

Open software CD 

Click Help Tab 

Click About 

tm100-key-programmer-1.png

After well communicating with TM100, the system will run an online activation. The system will display how many days remaining 

tm100-key-programmer-2.png

2) Updating TM100 Key pro 

Press Close button, you will be able to check the TM100 key pro hardware and software version information 

tm100-key-programmer-3.png

Click 【Update Software】button 

Downloading new software from server and it will take several minutes, please wait 

After that the system will display a windows prompting “File was downloaded successfully, please save your work”, click YES to update 

Update is processing 

Back to software main menu 

Click Help tab 

Click About to check the software that has been upgraded 

 

3) TM100 online authorization

Click Tool tab on the main menu 

Select 【Install New Modules】option 

tm100-key-programmer-4.png

TM100 is rebooting 

Licensed modules were installed successfully 

Ready to carry out function, read pin codes, key learn, etc 

05:54 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)