topblog Ivoire blogs

20/06/2015

How to solve “X sensor error” Automatic V8/X6 Key Cutting Machine

Automatic V8/X6 Key Cutting Machine is universal key cutting tool,supports multi-brands car models.And some customers may have the “X Sensor Error”,obd2express.co.uk shares the solution for x error.

 

How to solve “X sensor error” Automatic V8/X6 Key Cutting Machine

x-error.jpg

Solution:Please tighten the screw like the following pic.

x-sensor-error.jpg

Compare with the Slica Key Cutting Machine, Automated X6 key cutting tool advantages: 

1. The price for X6 less  than 10% of Silca brand, but the funcation is much better than slica’s.

2. X6 with lightweight and portable, battery-powered DC electrical impulse is very suitable to go out to work. It can be work in your car.

3. X6 has a potential big market as a latest Automatic key cutting machine.

4. X6 can be make a new key without original keys , and do both external milling and vertical milling . It can be make almost all kinds of keys with only one machine!

04:16 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

19/06/2015

UPA USB No Programmers Connected to the USB Module Error

Here is the UPA USB device programmer “No Programmers Connected to the USB Module” error possible causes and proper solution provided to deal with the communication error. 

 

Problem:

When installing UPA USB serial programmerV1.3.0.14 software on Win 7 operating system, the UPA software is well loaded, but the system give an error message when connect UPA USB programmer with computer:

 

No Programmers Connected to the USB Module

 

Error photo taken:

UPA-USB-serial-number-v1.3.014-1.jpg

UPA-USB-serial-number-v1.3.014-2.jpg

Possible reason:

1)Drive software issue 

2)Computer issue 

3)Device is damaged 

 

Proper solution:

1)Check if the UPA USB driver is correctly and well installed which means UPA USB V1.3.014 software can only works with corresponding UAP USB device (green color). Do not load UPA V1.2, V1.3 software with UPA USB V1.3.0.14 full adapter hardware. Otherwise, the system will not detect the driver. 

2)Change another laptop running Win XP operating system and re-install the software 

If the above procedure is done properly, your UPA USB ECU programmer is damaged. Send your main unit back to your dealer for repair.

10:26 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

18/06/2015

ODIS V2.23 software for VAS 5054A VAG groups technical support

After i install and activate the software, when i open the software from desktop, it gives this prompt "required java runtime version 1.7u4 not fould". what should i do next?

odis-v223-software-for-vas-5054a-vag-groups-technical-support-6333-1.jpg

odis-v223-software-for-vas-5054a-vag-groups-technical-support-6333-2.jpg

Reason: This problem is caused by your system java does not support this ODIS software.

 

Solution: 1) do not open the software from the screenshot of your desktop. Open the software from start, then see if you can start this software.

2) If still have this prompt. You need to change to use our WIN7 system, then install this software again. For WIN7 system, please send email to sales@obd2express.co.uk to ask for the download link.

09:45 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)