topblog Ivoire blogs


Free BMW Scanner Pa-soft V1.4.0 on Win 7 32-bit step-by-step

Some users had issue on installing BMW Scanner V1.4.0 PA-SOFT software driver on Win 7 64bit, but no problem on Win 7 32-bit. Following is the step-by-step instruction to install or update the BMW Scanner USB driver for Windows 7 32-bit.


Pre-installation download:

Free download BMW scanner V1.4.0 Pa-soft


If the driver is not compatible with Windows 7 or you have not logged in as "Administrator", latest win 7 driver can be downloaded here: 

The USB driver can be installed for win7 32 bits without any issue. But for Win7 64-bit, you need to download the latest driver from


BMW scanner 1.4.0 USB driver on Win 7 32-bit instruction:

1) Remember where the folder/the program is installed. This will help to tell Win 7 O/S to locate the USB driver. For example: I:3 in 1bmwscan140abmw 140 driver. 


2). Click Window "Start" button and chose "Control Panel" GUI button


3) Select "System" and then "Device Manager" GUI button


4) Select "Universal Serial Bus controller”


5) Select the USB device that is labeled as "BMW Scanner"


6) Right click to invoke sub menu of the "BMW Scanner"

Select "Update Driver Software"


7) Select "Browse My Computer for Driver Software"


8)Click "Browse" and locate where the software folder is located. And tick "Includes subfolders" as well. 


9) Locate “BMW V1.4.0 Drivers” folder and press the "OK" button.


10) Check the folder is correct and click on the "NEXT" button to install the USB driver.


11) When the system will display “The best driver software for your device is up to date” message, the BMW scanner driver is well installed on Win 7, 


12) Right click on the BMW Scanner and select "Properties" to confirm "The driver is working properly". Please ensure that you MUST have "administrator right" to install the USB driver.

13) Plug the BMW v1.4.0 scanner cable with vehicle via OBD diagnostic socket. The label should be facing to the door with the LED light turn ON.


If your BMW model has 22-pin diagnostic socket, you properly need another BMW 20-pin to OBD2 16-Pin Connector.

05:47 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


(Attention) Original XTOOL PS2 GDS Gasoline wireless connection

Dear original Xtool PS2 GDS Gasoline diagnostic tool old user,

As known, Xtool PS2 GDS Gasoline supplied by adds one new blue adapter used for communicating via wireless, therefore if you are accustomed to the wired connection way, you are advised to connect Xtool PS2 wireless to the vehicles in this way.

Original XTOOL PS2 connect.jpg

Note:If the WIFI icon on the screen is not ×, then it mean the machine is under wireless communication. After you connect the machine like it, then it will communicate automatically.


04:48 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (1)


2015 BMW ICOM Rheingold WIFI setting guide and using tips

Our best quality BMW ICOM (Item No:SP168) with latest 2015.6 diagnostic and programming ISTA-D 3.49.30 ISTA-P 55.4.000 software has been added WIFI wireless connections. Following are the instruction on WIFI setting and using tips. 


How to configure 2015 BMW ICOM WIFI wireless connection?


Computer requirement:

Almost 95% laptops on the world with Intel chip (I3/I5/I7 series) and have 4GB memory

1. Insert WIFI USB D-link into the computer via USB port


2. Turn off the computer built-in WIFI or additional WIFI resources. Make sure only BMW ICOM WIFI USB exist on the computer. Meanwhile, disable both Internet network and local area connection.

3. Then power on computer.

4. Open “Network Connections” program to check there is no other existing Internet and Local Area connection.


NOTE: Do not disable DWA-131 which is the ICOM WIFI USB. If it displays “X” mark, ignore it.

5. Run BMW ICOM Rheingold ISTA-D ISTA-P software, tick “WIFI for ICOM”


6. Now connect your ICOM firmware with your car. Wait for 20-60 second, then you will see the light on the ICOM main unit will flash slowly or do not flash which means the good communication is built between the USB WIFI and ICOM A2 WIFI.


7. Start using diagnostic or programming software. Click “OK” to accept the system prompt


8. The ICOM Rheingold main interface can not be closed, but only be minimized. 


9. ICOM software will detect and recognize ICOM firmware. 

2015 WIFI BMW ICOM diagnostic& programming system connection diagram:


2015 BMW ICOM WIFI using tips:

1). If you need perform ECU programming function with ICOM, you’d better using USB connection instead of WIFI wireless connection. 

2). Both our customers and engineers have tested and recommend to use 2015.1 BMW ICOM Rheingold ISTA-D ISTA-P 256GB SSD Solid-State Disk (Item No: SS151-A1 and Item No: SS151-A1S) to work with ICOM A+B+C which carries out more stable programming, especially for modifying BMW cars. 

3). Our BMW ICOM WIFI SP168 comes with default 2015.6 software HDD, if you need 2015.1V ICOM SSD software, please contact our customer service first and inform us the language you need.

08:08 Publié dans Blog, Jeux, Shopping, Web | Lien permanent | Commentaires (0)