topblog Ivoire blogs

28/07/2015

Volvo Tech Tool 2.03/3.02 PTT download + setup+ activation

Volvo Premium Tech Tool PTT Software 2.03/3.02 is latest software running with Volvo 88890300 Vocom Interface

volvo-88890300-vocom-interface-1.jpg

Many people feedback, they are concerned about where to download PPT 2.03, PPT 2.03 installation and activation. obd2express.co.uk engineer  would like to answer these questions one by one in the following parts. 

 

Where to download PPT Software 2.03?

Browse this link to download PPT 2.03 all files: 

https://mega.co.nz/#F!MMEF0aRT!OcseZ1B70uYgbIOQYrr7VQ 

 

How to install and active PPT 2.03?

OS requirement: support Win 7 Professional or Ultratme

1. Copy all the downloaded files to usb-hard disk 

2. Unzip "Acronis Boot 2014.part1.rar" (need winara 5.0 above version)

3. Burn "Acronis Boot 2014.iso" into CD disc

4.Unzip Tech Tool 2.03.85 (With APCI+ Update!)_Final.part01.rar, password: 

E29A11A8EE81DD9D1606BD83BBA26559, will get Tech Tool 2.03.85 (With APCI+ Update!)_Final.tib

5. Insert acronic boot cd, boot laptop

6. Recovery -> choose Tech Tool 2.03.85 (With APCI+ Update!)_Final.tib-> recovery to laptop harddisk

7. Reboot PC , now you will get ptt2.03 with new win7 system , then go to  install driver

8. Copy "TechToolCoreDevelopmentContent.rar" and 

"VCADSProDevelopmentContent.rar" to desktop

9. Send obd2express.co.uk teamviewer id password for activation. 

 

More detailed pictures on PTT V2.03:

ptt settings-02.jpg

volvo-88890300-vocom-03.jpg

volvo-88890300-fw-update-04.jpg

04:44 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

27/07/2015

Volvo VIDA Dice diagnostic scanner DiCE-0000 error (fixed)

Problem:

After well installed Volvo VIDA 2014D/Super Volvo Dice pro on Win 7 laptop and connected DiCE unit with vehicle. The system was saying it found new hardware and install the driver. The Volvo Dice unit firmware status LED indicator was blinking red, and in the program VIDA the name is DiCE-000000 (normally it shows DiCE-206751 once well communicated).  DICE-000000 shows that the power input is 0V while it’s on a power supply.  Have checked the USB connection and it was OK. 

volvo-vida-dice-error.jpg

Solution:

Here is the solution tried out by our customers:

1) Re-install VIDA software 

Removed dice related software / drivers in add/remove programs then re-install from original disk, plug dice in-to computer and re-install.

 

2) Update the firmware

User experience: I had similar problems with Vida Dice 2013A, but after firmware update all worked fine.

Disconnect DiCE unit (USB)

Re-connect the DiCE device (must be powered by 12V)

Use soft "Firmware Update" (by "Dice catalog in C:ProgramFiles/Dice)

 

2) Fix Volvo Vida DiCE firmware

Disclaimer: You are on your risk. We are not responsible for the damage. 

Re-program the CPU chip in Volvo DICE firmware PCB board

 

NOTE: only the CPU chip needs to be programmed. 

CPU chip has 144pin, probably marks Renasas and need E8A emulator

volvo-vida-dice-firmware-fix.jpg

If all above methods or do not know how to reprogram CPU chip, please send back your VIDA DICE kit to use for repair.

05:33 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

24/07/2015

Tacho Programmer CD400 Programmer $698 Free Shipping

07-18-2015 update

Multilanguage Tacho Programmer (Truck,Bus) CD400 Programmer drop to $698 Free Shipping sold at obdexpress.co.uk

http://www.obdexpress.co.uk/wholesale/cd400-tacho-program...  

 

Tachograph programmer is used for what? 

Multilanguage Tachograph programmer (Tacho) CD400 is designed for verification, calibration and configuration of control devices (tachograph) when installed on vehicles. The device allows you to define the W figure determination on measuring track or rolling road, K figure measure, can be used as speed simulator for the tachograph when checking the speedometer and odometer. 

 

Tachograph programmer package shown as follows:

cd400-tacho-programmer-tachograph-programmer-a.jpg

Tacho programmer main unit, cable for 1319, cable for 13ХХ/1318, V.Root 8400, cable for EGK-100, cable for 1324, cable for V.Root 2400, cable for CA-RS232-1, cable for digital tacho

 

The Tachograph programmer calibrates and programs all analogue and digital tachographs.

Analogs: KTCO 1314/1318, Motometer EGK100, FTCO 1319, MTCO 1324/1390, TSU 1391, VR2400.

Digitals: DTCO 1381 (DTCO® 2.1 active), SE5000 (Exakt Duo), SmarTach, EFAS-4. 

A Workshop Card is required to calibrate the digital tachographs

 

What Tachograph programmer can do?

W figure determination on measuring track (with optional photo-cell) or rolling road

K figure measure on KTCO 1314, KTCO 1318 and FTCO1319.

Parameter programming

Activation and deactivation of IMS (Independent Motion Signal)

Activation and deactivation of VDO counter.

Odometer reset and adjustment (mileage correction).

Speed simulation and customizable automatic test diagram.

DTCS reading (Digital) and erasing

Sensor pairing (KITAS activation)

Clock test

Workshop card’s PIN recording and input through CD400.

 

The most reasons that users prefer to Tachograph programmer:

No power connection nor battery charging required, the only tester powered by the tachograph itself.

Compact size the smallest tachograph tester on the market, and weight only 1.5KG

User friendly, clear 4 lines menus, no training required

Automatic tachograph model detection on power on

Double accuracy of the W factor measure on track by detecting half pulses

The only tester being able to reset the odometer and change the sender type on the VR2400

Flash program memory, easy software upgrade using a serial port or USB serial adapter on any PC.

 

To know more details on Tachograph programmer, the user manual will help. 

http://www.obdexpress.co.uk/upload/pro/cd400-tacho-progra... 

09:55 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)