topblog Ivoire blogs


VD300 V54 FGTech Galletto 4 vs. old FgTech Galletto V54

There is a new VD300 FGTech Galletto 4 V54 Master ECU tuning kit with plastic box available in What’s the difference between the new VD300 Fgtech and the old FgTech Galletto V54?


1.Same is the exactly the same, project same functions as well, both support BDM-TriCore-OBD Function

2.VD300 is deigned with plastic box from different manufacturer. VD300 is the given name of the new hardware

3.Firmware PCB board parts are very similar 

4.Motherboard PCB layout is slightly different

5.VD300 Fgtech galletto is cheaper in price


VD300 FgTech Galletto V54 PCB display:




Old FgTech Galletto V54 Master ECU programmer PCB board


Customer feedback:

1) I have bought this galletto. Ok build quality, but both q18 and q20 are p-channel zvp2106a. 

2) Now tested BDM edc16 and works ok also Renesas from Subaru. Today will try K-Line and CAN. 

3) Galletto V54 VD300 (plastic box) – reads ok (via OBD EDC16C35 100% ok) 

4) It doesn't read Vag EDC15 1.9 tdi and delphy mpc555 mondeo 2.0 tdci. Read and write VAG EDC16CP34.


FgTech galletto v54 driver software can be free downloaded here:


NOTE: Software comes with virus, disable any anti virus software before running on Win XP O/S.

05:56 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


XPROG-M V5.55 Box program MC S9S12HA48CLL chip

I have several clone ECU (IMMO) programmer (Kwp2000 plus, upa usb 1.3 green, xprog-m v5.0 and new xprog v5.55). 


KWP 2000 plus ecu flasher is the cheapest and old stuff for DIY starting. For secured Xprog-m is better, uusp upa usb is good but very limited for secured mcu, it can do only some 908 with know security sequences. UPA works better on MOTOROLA chips. 


To use UPA USB, you must have knowledge to use with processor and to use Xprog-m, you must be good in soldering/desoldering. 


Xprog M box v5.0 tuning kit comes without dongle which makes it easier install then v5.5.5 with USB dongle. Xprog 5.0 works good but do not read some mcu authorizations, like CAS3. So I go for v5.55.  


I did not buy the T420 laptop with xprog v5.55 soft, I kept using well v5.55 on a XP laptop with correct version of Adobe 10. I will not take risk on load in on win7. Not bad, there is a video installation guide for reference.


This was the first test result with mc s9s12ha48cll chip programming in-circuit (BDM) with x-prog v5.55 ecu programmer


Some photo screenshots taken bellow:










The pictures are clear (soldering/connectors etc) so I am not going to explain it in detail. The V5.55 is said to add BMW CAS4 decryption, I have no chance to test it yet.

07:53 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


How to use CG100 PROG III airbag restore with detailed pictures

CG100 PROG III- designed to read Infineon Tricore MCU’s over CAN-bus.Supports Read/Write EEPROM function for secured and non-secured SAC-TC1766 SAC-TC1767 SAC-TC1796 SAC-TC1797 microcontrollers.comes with Mileage, DPF, ECU system time, ISN built-in calculators.Edit CRC Eeprom.


Where to get newest V2.6 CG100 PROG III?

Recommend you, CG100 PROG III V2.6 for £413 + shipping, details at:

The sales rep is helpful and knows well what he sales, and patient to help sort the problem out. 

It is packed with CG100 main unit, adapter, USB line and charge. 

CG100 PROG III-1.png

How to use CG100 PROG III?

OS requirement XP/WIN7/WIN8/32bit/64bit

Step 1: Choose the model.

Firstly come to CG100 PROG III user interface. 

CG100 PROG III-2.png

Then choose the car make.

CG100 PROG III-3.png

Take Toyota Make for example, the following Toyota models are CG100 PROG III supports.

CG100 PROG III-4.png

CG100 PROG III-5.png

CG100 PROG III-6.png

Step 2: Connect cable. 

For detailed cable connection pictures, after you choose the model you want to do, it will show the detailed cable connection photo, to tell you where is the desolder point and how to connect. You can follow the photo to connect.  

Picture example as follows:

CG100 PROG III-7.png

CG100 PROG III-8.png

CG100 PROG III-9.png

CG100 PROG III-10.png

Step 3: Choose the adoption. 

CG100 PROG III airbag restore tool support and adoption: 

Renesas, Infineon, Freescale, ST and CPU

CG100 PROG III-11.png

CG100 PROG III-12.png

For detailed support and adoption list:

1. Renesas

R5F61797, RF61725, R5F61723, R5F61721, the model in the computer are assembled as follows: Toyota, Honda, Subaru.

2.  Infineon 

XC2060N-40F,XC2060M-104F,XC2336B-24F,XC2336B-40F, XC236


64A-72F,XC2364A-104F,XC2365A-56F,XC2365A-72F,XC2365A-104F, XC2361B-24F, XC2361B-40F, XC2363B-24F, XC2363B-40F, XC2364B-24F, XC2364B-40F, XC2365B-24F, XC2365B-40F, the model in the computer are assembled as follows: Nissan, Suzuki, Hyundai, Ford, Mazda, Land Rover, Jaguar, GM.20seconds of read and write. this speed supported is exclusive in the wordwide.

3. Freescale  

MPC5604P(0M26V)(1M36W)the model in the computer are assembled as follows:Honda

4. ST 

 SPC560 the model in the computer are assembled as follows:Volkswagen

5. CPU 

ATMEGA169, ATMEGA32, ATMEGA16, ATMEGA8, ATMEGA88, ATMEGA48. The instrument model tune number of kilometers