topblog Ivoire blogs

05/10/2015

NEXIQ USB Link 135032 truck diagnostic cable list

These adapters/connectors can be used together with NEXIQ USB Link adapter, Xtruck USB Link, Bluetooth Xtruck USB Link, Bluetooth VXTRUCKS V8 USB Link.

Xtruck USB Link-1.jpg

SF67 6- and 9-pin Y Deutsch Cummins Adapter for XTRUCK 125032 USB Link Diesel Truck Diagnose Interface

http://www.obdexpress.co.uk/wholesale/pn-405048-6-9-pin-y-deutsch-adapter-xtruck-125032-usb-link-diesel-diagnose-interface.html

6- and 9-pin Y Deutsch Cummins Adapter-2.jpg

SF70 PN 88890027 8 Pin Adapter for VOLVO/MACK for  NEXIQ USB Link http://www.obdexpress.co.uk/wholesale/pn-88890027-8-pin-volvo-mack-adapter-xtruck-125032-usb-link.html

8 Pin Adapter for VOLVO MACK-3.jpg

SF71PN 88890034 14 PIN Adapter for Volvo for XTruck/NEXIQ 125032 USB LINK http://www.obdexpress.co.uk/wholesale/pn-88890034-14-pin-volvo-adapter-usb-link-software-diesel-truck-diagnose.html

14 PIN Adapter for Volvo-4.jpg

SF72 PN 403098 USB Cable for XTruck/NEXIQ 

http://www.obdexpress.co.uk/wholesale/pn-403098-usb-cable-usb-link-software-diesel-truck-diagnose.html

PN 403098 USB Cable for XTruck-5.jpg

SF78 PN448015 Cable for Caterpillar for XTruck/NEXIQ 125032 USB Link 

http://www.obdexpress.co.uk/wholesale/caterpillar-cable-xtruck-usb-link-software-diesel-truck-diagnose.html

PN448015 Cable for Caterpillar for XTruck-6.jpg

SF82  Komatsu cable for XTruck USB Link + Software Diesel Truck Diagnose

http://www.obdexpress.co.uk/wholesale/komatsu-cable-for-xtruck-usb-software-obd2express.html

Komatsu cable for XTruck USB Link-7.jpg

SF86 PN 448033 3 Pin Deutsch Adapter for XTruck/NEXIQ 125032 USB Link Diesel Truck Diagnose Interface

http://www.obdexpress.co.uk/wholesale/pn-448033-3-pin-deutsch-adapter-xtruck-125032-usb-link-diesel-truck.html

PN 448033 3 Pin Deutsch Adapter for XTruck-8.jpg

SH27-F Full set cables for NEXIQ

http://www.obdexpress.co.uk/wholesale/full-set-cables-for-xtruck-usb-link-2636.html

Full set cables for NEXIQ-9.jpg

1pc x 6- and 9-pin Y Deutsch Adapter

1pc x OBDII Adapter

1pc x J1962 for GMC Truck W/CAT Engine

1pc x PN 88890027 8 Pin VOLVO/MACK Adapter

1pc x VOLVO 14PIN Adapter for XTruck

1pc x PN448015 Caterpillar Cable

1pc x PN 448033 3Pin Deutsch Adapter

1pc x Komatsu Cable for XTruck

1pc x USB cable for XTruck 125032

 

Nexiq USB Link 493013 adapter pinout:

Support connection to all J1962 vehicles (Ford, GM, Dodge, Volvo/MACK, Isuzu, Hino).

Nexiq USB Link 493013 adapter pinout-10.jpg

OBD II socket

1-1,2-2,3-3,4-4,5-5,6-6,7-7,8-8,9-9,10-10,11-11,12-12,13-13,14-14,15-15,16-16

Jumper 1-24 just use 1-16 though

 

Pinout for adaptor 493013 OBDII 16 pin to 26 pin

Pinout for adaptor 493013 OBDII 16 pin to 26 pin-11.jpg

NEXIQ USB-Link 488013 adapter for Isuzu IDSS pinout

NEXIQ USB-Link 488013 adapter for Isuzu IDSS pinout-12.jpg

NEXIQ USB-Link 488013 adapter for Isuzu IDSS pinout-13.jpg

10:44 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

03/10/2015

(Solved) Mercedes aircon blowing hot on driver side, thermotronic 4 zone

Problem:

I have now had two duovalves replaced under warranty, the second as the first was replaced under warranty and now the warranty has expired, but now the dealer says the Actuator motor is faulty and needs replacing, how does this affect the airflow, where is it located and is £1300 for the part and 8 hours labour reasonable. What would a good Indy charge for this to be replaced?

 

So after agreeing to goodwill at 51% and booking the car in, the dealers have had it for 5 days and still can't fix the drivers side blowing hot and the rest of the car cold. It wasn't the stepper motor or the control unit behind the dash, they are currently looking at the heater box, but can't find any messages in STAR DIAGNOSIS.

 

Solved:

Finally all resolved, was the stepper motor, as they had previously thought, but had to use trial and error to find the right one. So after 7 days it's all working as it should. Just goes to show that good old fashioned logic can work if your ignore the diagnostic software and go with your gut. Having some help from the forum and having a little understand from the WIS, helped me point the dealer to keep trying the motors. Final price was £650, as I got 51% goodwill and also a further 6% discount.

 

The use of a 2015 facelift c250 premium plus estate for the 7 days was nice too!

09:17 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

02/10/2015

Read sirius 32 on 2000 clio 1.4 with Fgtech galletto and TL866

Car model: 

2000 clio 1.4

 

Issue: 

immo issues

 

What I tried to do: 

read a sirius 32

 

Tool I tried to use: 

I tried with galletto 1260 but some how it doesnt read, I also have fvdi and xprog.

 

Working solution:

You just desolder the 29f and you read it on the bench, open ECU and read AM29F200BB with programmer(Fgtech galletto, TL866 Minipro programmer and willem). 

 

Tools reviews on: Fgtech galletto, TL866 Minipro programmer and willem

Fgtech Galletto Reviews:

Read it with galletto on boot mode flash. 

siemens_sirius_32.jpg

PS: I ordered FGTECH Galletto for €45 + shipping, details at:  

http://www.obdexpress.co.uk/wholesale/fgtech-galletto-4-m... 

 

TL866 Minipro programmer reviews

If you are planning to work frequently on those ECU I recommend to buy TL866 Minipro programmer.

With tsop44 adapter, this tool is very stable for reading F200 flash fitted on Sirius32

TL866 Minipro programmer adapter list for reference: 

http://www.obdexpress.co.uk/upload/pro/socket-adapters-su... 

 

Willem Reviews:

willem is also very good old programmer, I use one from 10 years, it is very good for many eprom and flash used in many ECU's and it's very cheap...

09:36 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)