topblog Ivoire blogs

15/10/2015

VAS 5054a ODIS 2.2.6+ PostSetup 6.70.1 Win 7 installation

VAG Volkswagen VAS 5054A ODIS diagnostic software for VW, Audi, Skoda, Seat, Bentley & Lamborghini is newly updated to 2.2.6 version with PostSetup 6.70.150. Here is the instruction on installing ODIS V2.2.6 on Windows 7 operating system. 

 

Software version: ODIS 2.2.6 + Postsetup 6.70.150+ free license 

Hardware: The new ODIS 2.26 software works with vas 5054 interface pass-thru SP33, SP33-B, SP33-C and SP33-BO (NO SP33-D !!!)

 

Operating system: Windows 7 (32-bit is better)

vas-5054a-odis-2.2.6-1.jpg

vas-5054a-odis-2.2.6-2.jpg

vas-5054a-odis-2.2.6-3.jpg

vas-5054a-odis-2.2.6-4.jpg

ODIS engineering 2.2.6 software installation on Win 7:

Main steps:

Step1: Install Driver 

Step 2: Install ODIS software 

Step 3: Activate/Validate license 

Step 4: Mount PostSetup-6.70.150

Step 5: Activate ODIS 2.2.6

Step 6: Connect vas 5054 via USB

Step 7: Bluetooth connection

 

Step1: Install Driver 

Open ODIS 2.2.6 software CD

Copy and paste Daemon-Tools-4.49.1356 zip file to desktop

vas-5054a-odis-2.2.6-install-1.jpg

Unzip the file 

Open Daemon-Tools-4.49.1356 folder, mount “InstalGadget” and run as administrator

vas-5054a-odis-2.2.6-install-2.jpg

Accept security warning, click “Install”

Adding virtual device

vas-5054a-odis-2.2.6-install-3.jpg

Click “Install”

System will detect driver and automatically install it

vas-5054a-odis-2.2.6-install-4.jpg

Step 2: Install ODIS software 

Open Daemon-Tools folder on desktop 

Open 01.Setup folder 

Open ODIS-S v2.2.6-RC369L-P6-Setup

vas-5054a-odis-2.2.6-install-5.jpg

Select language 

Install Offboard Diagnostic Information System Service setup, click “Continue”

vas-5054a-odis-2.2.6-install-6.jpg

Select target folder, press “Continue”

Select language again 

Press “Continue” until the system asks to select the license file 

Search license file to C:ODIS-2.2.6/02.Patch License/license.dat

vas-5054a-odis-2.2.6-install-7.jpg

vas-5054a-odis-2.2.6-install-8.jpg

Press Continue 

Click “Finish” when ODIS setup is well installed

vas-5054a-odis-2.2.6-install-9.jpg

Step 3: Activate/Validate license 

Open ODIS 2.2.6 CD

Open 02.Patch License folder 

Copy OffboardDiagLauncher and follow next step

vas-5054a-odis-2.2.6-install-10.jpg

Right click Offboard Diagnostic System Service software on desktop>>Properties>>Open File Location>> paste and replace OffboardDiagLauncher on the existing folder

vas-5054a-odis-2.2.6-install-11.jpg

Open Daemon tools folder 

If the system prompts “unable” to find activated DAEMON Tools Lite license, press “Continue”

Choose license type: Free license and click “Activate”

vas-5054a-odis-2.2.6-install-12.jpg

Click “Validate” to confirm license info.

License was validated successfully. 

 

Step 4: Mount PostSetup-6.70.150

Add image to “Image Catalog”

Browse image to C:/ODIS 2.2.6/03.Postsetup 6.70.150/ Postsetup 6.70.150

vas-5054a-odis-2.2.6-install-13.jpg

Mount PostSetup-6.70 iso

vas-5054a-odis-2.2.6-install-14.jpg

Step 5: Activate ODIS 2.2.6

Open ODIS v2.2.6 software on desktop 

Select Local directory to BD-ROM Drive (G:100)/Postsetup

vas-5054a-odis-2.2.6-install-15.jpg

Enter activation User name: abc and Keyword: abc (both low-case “abc”), press forward arrow to see Postsetup version

vas-5054a-odis-2.2.6-install-16.jpg

vas-5054a-odis-2.2.6-install-17.jpg

Press forward arrow to download 384 files ODIS.data file, the procedure takes about 30 minutes

vas-5054a-odis-2.2.6-install-18.jpg

Download completely will open ODIS automatically 

ODIS release notes information 

Click “Admin” on the right 

Select software language 

Exit the ODIS 

 

Step 6: Connect vas 5054 via USB

Open Computer 

Eject BD-ROM Drive (G:100)

vas-5054a-odis-2.2.6-install-19.jpg

Connect vas5054a interface with computer and vehicle 

System will automatically install vas 5054a device driver 

Open Computer>>Manager>>Device Manager>>Softing Vehicle Interface>> VAS5054 to make sure well communication is built

vas-5054a-odis-2.2.6-install-20.jpg

Run ODIS software on desktop 

Press “Start diagnosis”

Turn ignition switch 

Select vehicle information, model, year, engine etc

vas-5054a-odis-2.2.6-install-21.jpg

Select model and function your need diagnose 

 

Step 7: Bluetooth connection

If you need to diagnose wirelessly, follow these steps to add Bluetooth. 

Tick the Bluetooth icon on toolbar, click “Add a device”

vas-5054a-odis-2.2.6-install-22.jpg

Select “VAS5054” and add to device

vas-5054a-odis-2.2.6-install-23.jpg

Enter Bluetooth pair password: 082145725

vas-5054a-odis-2.2.6-install-24.jpg

Open Computer>>Manager>>Device Manager>> check Com port was set to COM4 >>Network adapters Bluetooth Device to check Bluetooth connection is well built

vas-5054a-odis-2.2.6-install-25.jpg

Open ODIS Service Diagnostic Interface Configurator on desktop 

Click “Add EDIC”

Select “VAS5054” to install

vas-5054a-odis-2.2.6-install-26.jpg

Select Local Bluetooth COM Port (COM4)

vas-5054a-odis-2.2.6-install-27.jpg

Run ODIS software 

Star diagnose vehicle wirelessly

 

PP077 ODIS 2.2.6+ vas5054a

http://www.obdexpress.co.uk/wholesale/best-quality-vas-50...

08:48 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

14/10/2015

K-TAG V2.13 KTM100 V7.003 CAN Communication error

Here is the solution to KTAG K-TAG V2.13 KTM100 7.003 ECU Programming Tool Master Version “Error (E011024) CAN Communication error” when reading EDC17. 

 

Problem:

KTAG KTM100 software reported CAN Communication error when read EDC17. Then another error displayed “This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.”  So he disconnect the current running FGTECH Galletto V54 ECU tuning software. Tried to uninstall KTM100 and communicate with other car models, still the same error displayed. (error screenshots)

Ktag-KTM100-edc17-1.jpg

Ktag-KTM100-edc17-error-2.jpg

Possible causes:

1.Anti-virus software or current running software 

2.Operating system 

 

Solution:

Ktag KTM100 7.003 does read EDC17. See “Reference”. But make sure you’ve done following settings. 

 

1. Disconnect anti-virus software and other current existing/running software programs (fgtech etc)

2. Download our Windows XP (Win XP SP3 professional) operating system 

http://www.chinaautodiag.com/download/ghost-windows-xp-professional-sp3-free-download.zip

How to install Win XP SP3?

http://www.chinaautodiag.com/download/How-to-install-ghost-windows-xp-professional-sp3.pdf

 

3. Disable both local and wireless network connection

Ktag-KTM100-windows-xp-3.jpg

4.Reinstall KTM100 V2.13 software and read ECU follow video instruction. 

http://www.dailymotion.com/video/x2vd2al_fw-v7-003-ktag-k...

 

Reference:

KTAG KTM100 is the best K-tag ECU programmer version to read EDC 17. 

 

KTM 2.13 adds more ECUs than other ordinary Ksuite software:

BMW:

EDC17C41 TC1797

       EDC17CP45 TC1797

       EDC17C50 TC1797

EDC17C56 TC1797

EDC17CP49 TC1797

MEVD172G TC1797

MEDV1725 TC1797

Public

EDC17C46 TC1797

       EDC17C44 TC1797

       MED17.1.6 TC1797

       MED17.5.21 TC1782

       MED17.5.5 TC1767

       ME17.5.24 TC1724

       MED17.1.1 TC1797

Volvo

       EDC17CP48 TC1797

 

Jaguar

MED17.8.31 TC1797

 

Opel

EDC17C59 TC1767

 

Run quickly

      EDC17C46 TC1797

      MED17.7.2 TC1797

      EDC17CP57 TC1793

      EDC17C66 TC1793

 

Ford

      EDC17C10 TC1797

 

Ferrari

      MED17.3.4 TC1797

 

McLaren

      ME17.8.3 TC1797

 

Renault

      ME17.9.20 TC1782

 

You can also watch the video example (dailymotion video above) on installing KTM100 software on Win XP and programming VW Golf 6 2.0L 1.6V TDI EDC17 CP14 ECU.

Ktag-KTM100-read-VW-EDC17-4.jpg

08:12 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

13/10/2015

Condor XC-MINI key cutting machine cut Honda HON66

Here is operation instruction on cutting Honda HON66 key with original Xhorse ikeycutter Condor XC-MINI automotive key cutting machine via key database using Clamp 2. 

 

Power on Condor MINI key cutting machine 

Select “Key Database”

Condor-XC-MINI-cut-HON66-1.jpg

Select car brand “Honda” and confirm

Condor-XC-MINI-cut-HON66-2.jpg

Enter key code on the door lock (last 4-digit) and confirm

Condor-XC-MINI-cut-HON66-3.jpg

Condor-XC-MINI-cut-HON66-4.jpg

Select master key to be cut and confirm

Condor-XC-MINI-cut-HON66-5.jpg

The Bitting Code will be found in the database, and it will be shown on the screen, click on “Cut” button to start cut key

Condor-XC-MINI-cut-HON66-6.jpg

Condor-XC-MINI-cut-HON66-7.jpg

Condor-XC-MINI-cut-HON66-8.jpg

Take out the key 

Change a new key blank 

Put a new Blank Key in the proper position of the clamp. 

Condor-XC-MINI-cut-HON66-9.jpg

Condor-XC-MINI-cut-HON66-10.jpg

New key has been cut

Test the new key

05:36 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)