topblog Ivoire blogs


MB SD Connect Compact 4 problem solution

Here is some information and problem solution for MB SD STAR C4. We have made the video for software activation, keep the same step as our video, then you can use the software successfully.

Video:How to activate the MB SD STAR C4 software

Q: Does this software HDD has requirement for computer or computer system? Can i use win7 system to install this software? Do you have SATA HDD?
A: Please install the software on XP system. XP system is best for this software. More steady for software running. Do not advice you use win7 system.
There are different hdd to choose: Dell d630 hdd and external hdd. If you have D630 computer, then choose D630 HDD, if you do not have this computer, then choose External HDD. Attention: For D630 hdd, make sure your computer is integrated video card and with 1GB memory, because the D630 of discrete video card is easy to have blue screen or shutdown and restart, restart and shutdown. …..For SATA HDD, based on the HDD type you choose.

Q: After i find Fingerprint ID, i click "Diagnostic", it do not show me the Fingerprint ID, but the following error prompt: " System errors: Internal error (3.17)- 3.89 You must contact the user help Desk ", why?

A: Follow this way to solve: C:Documents and SettingsAll UsersApplication DataLicDir

Q: When i setup the Wireless Network Connection, i got he following prompt, what should i do next?

A: Ignore it. Please follow our video to setup the star, then you can use it directly.

Video:How to set wifi for 2013.9 MB SD Connect Compact 4 Star

Q: When i install the software HDD, it prompt me "No access authorization code! Please contact the Star diagnosis call center". What's this?

A: You do not activate the software. Star software need activation before use. Please follow our video to activate your software, and send the activation data (Hardware fingerprint, LAN-ID and HW-ID) to, we will resend the activation data you need to you.

Q: EPC needs activation or not? Where to enter EPC? 
A: EPC needs activation. Make sure you enter EPC from "EPC NET EXPLORER", this is the right way. Then you will find LAN ID, then go on to activate the software.

Q: After i insert the D630 software HDD to my computer, it ask the "administrator code" for me, can you tell me the code?
A: The administrator code is: User$star2004.

Q: After i click "Select MUX", it gives me the error code like this photo, Status "No Signal". How to solve this problem?
A: You need to reset the IP address. Please connect to "Local area connection", and set IP address:, Subnet mask: for the detailed steps, please watch the video tutorial by clicking column "Video".

Q: I use USB cable to connect the external hdd with my computer, what to do next? Which software i need to install first?
A: Install "setup.exe" file first.

Q: I do not know what setup i have changed, when i use this software, it gives me this error prompt: "Internal error: (3.17)-3.173 you must contact the User Help Desk", what's wrong with my setting?

A: Your problem is that you change file “lic-key-2” as “read only. Do not change file “lic-key-2” as “read only.

Q: I want to use MB SD STAR C4 to connect with ECU to read Chassis No. for my smart 1998. Is it OK?
A: For SMART car, it needs login password. You can buy our DAS SMART Calculator to calculate login password.

Q: Does MB SD star c4 has the key? Or how to set up it? I want to use it by network key, instead of network cable, is it possible? Can i use it by WIFI and network cable at the same time?
A: For Dell d630 hdd, it has the wifi function. WLAN key is "aaaaaaaaaaaaaaaaaaaaaaaaaa" (26 a in total). You only can work it by one way: Or wifi, or network cable. Not for both of them at the same time.

Q: Does this MB STAR C4 have online function? And SCN coding?
A: This MB SD STAR C4 support online programming and SCN coding function, but you need pay money to open.

06:46 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


How to solve super ICOM WinKFP Error 300

Here’s the solution for how to fix WinKFP error 300: First HW interface could not be initialized, for bmw super icom v2015.8.

Just got super iCOM 2015.8V, but failed to open WinKFP. Didn’t know how to setting, without instruction on the screen.

super ICOM WinKFP Error 300-1.jpg
And it pop up error 300: First HW interface could not be initialized!

super ICOM WinKFP Error 300-2.jpg
Open “EDIABAS Configurat...”;

super ICOM WinKFP Error 300-3.jpg
(icon on Desktop)
select ICOM,
Get the IP to enter.

PS. How to get ICOM IP:
Go to download ITOOL Radar;
WHEN ICOM state is free, need to reserve;
Connect ICOM via LAN;

super ICOM WinKFP Error 300-4.jpg
Then click OK.

super ICOM WinKFP Error 300-5.jpg
The software of super icom is greatly different from that of normal icom (icom a2). If you did something wrong on one module, it may cost more than a million and cause several modules broken at the same time. Thus, plaese learn as more as possible for preparation before using super icom.

07:38 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)


Ford VCMII IDS Remove Speed Limiter on Ford Transit

This is an instruction on how to remove speed limiter on Ford Transit with China Ford VCMII diagnostic tool.

Device used:
Ford vcm2 diagnostic tool

Ford vcm2 diagnostic tool-1.jpg
Once VCMII IDS has commmunicated with your Transit Connect,

Select toolbox>> module programming, click on the tick button.

Selecr Programmable parameters>>speed items, click on the tick button.

Ford-VCMII IDS-Remove-Speed-Limiter-2.jpg
Select vehicle speed limit>>disable speed limiter, click on the tick button.

Ford-VCMII IDS-Remove-Speed-Limiter-3.jpg
Is the vehicle equipped with PATS? Select Yes for PATS.

Ford-VCMII IDS-Remove-Speed-Limiter-4.jpg
IDS erase PCM (ECU).

Ford-VCMII IDS-Remove-Speed-Limiter-5.jpg
IDS download data to PCM (ECU).

Ford-VCMII IDS-Remove-Speed-Limiter-6.jpg
Click on the tick button to continue.

Ford-VCMII IDS-Remove-Speed-Limiter-7.jpg
IDS prompts: Turn ignition off & on for several times.
Run PATS service function - click on the tick button to continue.

Ford-VCMII IDS-Remove-Speed-Limiter-8.jpg
IDS prompts: Turn ignition off & on for several times.
Operation complete. Click on the tick button to continue.

Ford-VCMII IDS-Remove-Speed-Limiter-9.jpg
The process is completed after DTCs have been cleared.

Ford-VCMII IDS-Remove-Speed-Limiter-10.jpg
Top 2 reasons to get Ford diagnostic tool VCM II:
1. Ford VCM II provides full dealer diagnostic capabilities for most 16 pin Fords, including Ford vehicles from old to latest.
2. Powerful function: Read/Clear DTCs, program ECUs, keys, PCM, ABS, Instrument Cluster, Air Bag, Injector Coding and so on.

PS. Clone VCM2 PCB display:

Clone VCM2 PCB display-11.jpg

Clone VCM2 PCB display-12.jpg

07:57 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)