topblog Ivoire blogs


Which can program new keys to Renault Megane 2 3 4?

Lonsdor K518ISE test report:

Have added new keys to Renault Megane 2 3 4


Here you go.


Lonsdor k518 and Megane 2:

Yes. Renault Megane 2 2008 year add new keys OK

Card smart key



Lonsdor k518 and Megane 3:

Already done with Lonsdor for Megane3 2014.




Lonsdor k518 and Megane 4:

Megane4 is not only able to be made by Avdi...

but now, MEGANE 4 done with lonsdor

Have made the card with 4 buttons

That's what the Megan 4 Card looks like.




Lonsdor K518ise and Megane 2: Yes!

Lonsdor K518ise and Megane 3: Yes!

Lonsdor K518ise and Megane 4: yes!


Lonsdor K518ise key programming at a decent price:


How to use Condor Mini + Tibbe Jaw M3 cut Jaguar 8 cut key

How-to's:How to use Condor Mini + Tibbe Jaw M3 cut Jaguar 8 cut key 


It’s aimed to cut a Jaguar 8 cut key with a Condor Mini machine


Have just cut the key and it seems to be 1 cut in front / 1 cut behind in placement.







Q: How far should this screw be in / how far out should it be??


A: tbe1






Q: How much does the rear screw need to stick out?


A: It is necessary to re-adjust the position of the key in the vice.




Q: what the best way to make sure it lines up in the correct place perfectly.


A: With the correct attitude, the machine itself will go to the right distance to puncture the key into the position of the first secret. at Ford it is shorter.




Q: I will give it another go fingers crossed lol


A: if properly configured for the Ford device, then do not re-adjust the vise of the length of the bolt. stand the workpiece of the key and cut it






Q: how far out do you have your screw?


A: in the vice, the key is the Ford, and the milling cutter has entered the required length independently. Do not be afraid




Q: the last cut i did was wrong it was to far forward by nearly a complete cut




A: It is necessary to adjust when the milling cutter stands in such position as at me on a photo. remove the vice and adjust the depth of the key with the screw, each time looking closely at how the milling cutter is positioned. The cutter must be in the position of the first secret


you do not have a vise


as you adjust the screw, tighten the fixing nut so that the screw does not hang and unwind. I'm sorry, I've got to go to the client.


try to insert the key deeper. with effort.




04:36 Publié dans car key programmer | Tags : xhorse | Lien permanent | Commentaires (0)


Otosys IM100 will work like Auro IM600,How to do?


Confirmed! OtoSys 100 will be able to do the same key programming as im600


About same, but if you need to do Mercedes-Benz, you need to buy a UP400 programmer

IM100+UP400 will have the same immo functions as IM600


With the up400 apart from the Mercedes key programming, your Otosys IM100 will have features like bmw cas4 key learning, 2015-2018 Land Rover&Jaguar Key Writing, Volvo Smart Key Learning


Most require eeprom work!


Otosys IM100 will work like Auro IM600 for immobilizer features and read PIN/CS from AUDI Q5/A4/A5 2015-2017 and learn keys to Mercedes-Benz


IMMO Functions: OtoSys IM100 + UP400 = OtoSys IM600



OtoSys IM100 immobilizer functions:


Immobilizer functions and features

Otosys IM100

Otosys IM600

Smart Mode (Guided and Automated Key Learning Function)



Auto Detect Make/Model/Year/System






Read PIN/CS (All Keys Lost)



Key Learning



IMMO ECU Reset/Adaption



IMMO ECU Refresh/Coding



Remote Learning



AUDI Q5/A4/A5 2015-2017 Read PIN/CS

With UP400


BMW FEM/BDC Key Learning and Adaption



Mercedes Key Learning

With UP400



Contact with our customer service center to get best price:

3. Skype:

4. WhatsApp: +86-18750906257