topblog Ivoire blogs

05/04/2019

Solution to FGTech V54 0475 can't find FGT2XX.dll

The first time the user installed FGTech Galletto 2 V54 0475, he encountered the following problem.

The software cannot be verified! The software may not work.

 FGTech Galletto 2 V54 0475 error

 

Then, he operated by following this video:

 

And got new error "Cannot find "FGT2XX.dll", Please re-install this application".

Cannot find "FGT2XX.dll

Possible reasons and solution by obdexpress.co.uk enginner:

Some files are get lost.

Please connect FGTech V54 to the computer and the car, then complete install the driver, re-install the Galletto software.

Here I leave a email Sales@OBDexpress.co.uk in case anyone need remote assistant.

29/03/2019

Free download and setup pcmflash 1.94 1.95 for KTMflash

Free download and setup pcmflash 1.94 1.95 for KTMflash ECU programmer clone, as well as KTMflash reviews.

 

Part 1: pcmflash 1.94 / 1.95 free download

Please firstly confirm the version number on the USB key.

1) pcmflash 1.94 free download

 

2) pcmflash 1.95 free download

 

Works with KTMflash ECU programmer perfectly.

 

Part 2: pcmflash 1.94 / 1.95 installation

 

PCMflash version: 1.1.94 for example:

download-and-setup-pcmflash-194-195-01

Select Tractrix Inc. – OpenPort 2.0 J2534 ISO/CAN/VPW/PWM

download-and-setup-pcmflash-194-195-02

download-and-setup-pcmflash-194-195-3

download-and-setup-pcmflash-194-195-4

download-and-setup-pcmflash-194-195-5

 

Part 3: reviews on pcmflash 1.94 / 1.95 working with KTMflash

  1. edc17C10 work fine with this tactrix clone.

checksum ok all ok ,read write rapid , excellent

tactrix connected to the rear of the power box and in front gpt and tricore cable,cable gpt and tricore ktag seems to be ok and help of dimsport or ktag yes, good box.

 

  1. edc17cp14 R/W chk ok

 

  1. dsg work fine (not tested by obd2) and you can use with windows 7 with no internet connexion (not tested with connexion)..

this clone work same as ori with good tactrix hardware.

 

  1. Read Audi A4 TC1796 ok

Guide:

  1. Read write MT80 ok

Guide:

 

6.Read Audi C7 DQ gearbox ok

Guide:

  1. Read Bosch ME17 8 8 TC1724/1728 ok

Guide:

 

  1. Read VW DSG DQ250 transmission ok

Part 1:

Part 2:

Because the video is too long to upload for one time.

 

To be continued……

 

27/03/2019

How to rework clone KESS V2 green PCB in the correct method?

Because some people are making some good money out of it (rework clone KESS V2 green PCB ), let’s make it free for everyone.

 

PS: the following red parts are the correct method. 

Transistors to use : 

BCR112

MMUN2113

BC817

Murata filters:

NFE61PT472C1H9L (connect ground for all of them)

Correct method:

Connect MIDDLE PINS MURATTA FILTERS TO GROUND, not the signal

Capacitors:

1uF – 35V

220uF – 10V

10uF – 16V tantalum

 

Go Follow Picture.

I changed Voltage Stabilizators as well
1 x LM1117 3.3v
1 x PZT2907AT1G
1 x LM2575s 5.0V
all diodes SK14 (not required)
Micro SD Card to better quality if is NO NAME (BLANK on the top) but very carefull, is not easy just copy CONTENT, need generate againb becase another card have diffrent CID so will doesn`t work, if you copy 1:1

KESS_REWORK

 

 

Compare with V5.017 Kess China clone green PCB:

 

KESS_REWORK 2

 

KESS_REWORK 3

 

 

BTW, reword has certain requirements on the user’s skills, please be careful. Invest the original one or the clone one will be better.

 

Thanks to @pocinas from DK forum.

Thanks Laurance editor.