topblog Ivoire blogs


How To Install FGTech Galletto V54 correctly with Win 7

Here is our customer experience of how to install FGTech Galletto V54 correctly with Windows 7

(Big thanks to Mr.Tim Thiessen ,good info to share with  FGTech Galletto users in


Here is the error when he was installed the FGTech Galletto V54 on Windows 7



Solution :

Hello, I would like to explain to you step by step how to install your FGTech Galletto V54 correctly with Windows 7. To do this, you must first uninstall the already installed software and the drivers.

Then we start with step:

1. Run “FGTech Galletto Edited v1.0.exe” as an administrator. Important: Do not create a desktop icon and run the program yet.

2. Next, connect the Galletto device to the power supply and then connect it via USB. The automatic driver installation fails. But do not worry, the installation is done manually.

3. Right-click on the “Computer” icon and select “Manage”. As soon as the window opens, click on Device management and select the USB port “FGTech”. Here you have to click “Update driver software”. And then click “Browse the computer for driver software”, then “Select from a list of device drivers on the computer”, then “Have Disk” and “Browse”.

4. Now look for the folder of “FGTech” on drive C. Here you open the folder “fgtech_new_driver” and select the following file: “fgtibus.inf”! Confirm everything, wait for the installation, and close all windows.

5. Run “FGTech Galletto Edited v1.0.exe” again as an administrator. Important: Do not create a desktop icon and run the program yet.

6. Run “Galletto win7.exe” as administrator. Create and install the desktop icon. If the installation is complete, start the program as an administrator.

7. Ignore the next two windows with hints and confirm with OK. FINISHED!!!

Hopefully this guide is understandable.


SDconnect C4 Wlan Error 2 Solved: Reset IP address

I have bought a Chinese SD Connect C4 MUX. Connected via the green LAN cable everything is working great on a EVG7 tablet with SSD and 2017.3 Xentry.


Problem is i cannot get the wireless working.

MUX display WLanError 2 , and the Wlan mac id is blank on the unit.


the Wlan Error2


see the screenshots


sdconnect-c4-wlan-error-2-message-1 sdconnect-c4-wlan-error-2-message-2 sdconnect-c4-wlan-error-2-message-3

Here is a solution…tested OK by professionals.


RESET LAN & WLAN IP address as follows:


On Desktop, right click to go to Personalize


Control Panel-> Network and Internet-> Network and Sharing Center

sdconnect-c4-reset-ip-2 sdconnect-c4-reset-ip-3

Network Connection-> Local Area Connection 2 Properties-> Internet Protocol Version 4 (TCP/Pv4) Properties

Use the following IP address:

IP address:

Subnet mask:


Change adapter settings


Network Connection-> Wireless Network Connection 3 Properties-> Internet Protocol Version 4 (TCP/Pv4) Properties

Use the following IP address:

IP address:

Subnet mask:



Open Road24h Ad-Hoc Connector for C4 Mux

Click on -1- Make Roard24h Ad-hoc Profile, then OK


Click on -2- Connect to MUX via Road24h, then OK

sdconnect-c4-reset-ip-8 sdconnect-c4-reset-ip-9

Road24h now is connecting



Open Administration

SDconnect Toolkit




Setup Encryption: WEP/ Hex


Enter the key


Copy the key as the network security key




Road14h is connected


The network location is now Work


SDconnect Toolkit Preview




It’s working!


Xentry/DAS can be used via WIFI.


Honda HDS v3.101.044, where to download & how to install


Free download Honda HDS software v3.101.044:!nJpERZ4Y!wP3ouC2uuo3U-978ifIfmP26TJTy3biyi2K-lmHb2mo


Pass: Honda

tested 100%

confirmed to work no issues with Honda HIMdiagnostic tool on

work perfectly on Insight 2010



So, how to install Honda HIM HDS 3.101.044 Windows 7 32bit?


HDS 3.101.044 installation explanation via words...



Go to Computer

Open the DVD drive E: Honda 3.101.044

Open the folder Honda 3.101.044

Run the Setup application


Honda HDS 3.101.044 will begin installation.


Accept the agreement

Select the destination. Here: Other (General)

Select the country. Here: the united states

Enter the dealer number 12345789012

Select a language to install



Honda HDS 3.101.044 is installing….

MVCI is installing….

Finish HDS installation



Back to the DVD drive E: Honda 3.101.044

Run GENERAL 64bit registration entries


GENERAL 64bit.reg have been successfully added to the registry



Copy all files in disk E:/new apps for genreg

Run Diagnostic system properties

Open file location

Copy and replace files in disk C:/GenRad/DiagSystem/Runtime/Apps


Close all the interfaces


Open Honda Diagnostic System on Desktop

This is Honda HDS 3.101.044 English Windows 7 32bit version


Press F12

Select HDS diagnostic interface: HIM


Test on INSIGHT 2010


Select Honda system






DTCs/freeze data



So, Honda HDS 3.101.044 is working no issues.

Source from