topblog Ivoire blogs

17/08/2016

OPCOM v1.59 program Remote Central Locking to Astra Mk4

Just managed program a NEW REMOTE CENTRAL LOCKING BOARD to the Astra Mk4 WITHOUT ALARMS via OPCOM V1.59.

I used:
a NEW remote central locking board; i mean PCB
a key for Astra Mk4
security pass for Mk4
a working Op-Com interface (hardware v1.59)

working software VAUX-COM 120309a
opcom-cable

Here is what i did:

(thanks for sharing in forums)

1. Insert the NEW remote central locking board into the key.

2. Put the key into the ignition and turn so the battery lights etc come on, DO NOT START THE ENGINE.

3. Connect opcom to the car.

4. Start up opcom and click on DIAGNOSTICS.

5. Select year of car.

6. Select model of car.

7. Select BODY from the menu.

8. select CENTRAL DOOR LOCKING from the menu.

9. Select PROGRAMMING on the right hand side of the screen.

10. Select SECURITY CODE from menu (this should be the only one available at the time).

11. Enter the SECURITY CODE and click OK.

12. Select PROGRAMMING REMOTE CAR KEY from menu.

13. Now just follow the on screen instructions.

14. Click on CLOSE.

15. Exit out of OPCOM.

16. Open and close door, and try locking the door and then dead lock it. Have done this unlock, then all should be done.

source:http://obdexpresscouk.blogspot.com/2016/08/opcom-v159-pro...

16/08/2016

OBDSTAR X300 Pro3 correct odometer for Audi Q5 2010/Volvo S80/Porsche

OBDSTAR X300 PRO3 key master by OBDSTAR Company features with the immobiliser key programming function of SKP900,OBDSTAR X100 Pro and X300 Pro ,can do Odometer adjustment, EEPROM/PIC and OBDII.
Its design is fully based on industrial standard, for example, it is designed with bilateral keyboards which make it easy to operate, besides its appearance is processed by special material and reaches to the shockproof level.

Why to Buy OBDSTAR X300 PRO3 for 8 Reasons:
 
1. The main unit system adopts ARM high speed chip to keep it running fast, stable and anti-jamming.
2. Upgrade via SD card at any moment.
3. Modern design and high-definition screen realize the integration of automotive industry and electronic information technologies and make auto diagnosis and key programming easier, practical and economical. 4. Integrity structure design makes it crack resistance, shock resistance and durable.
5. Industrial design ensures the tool work stably under tough environment, such as high and low temperatures.
6. Covers all functions of SKP-900, also add mileage correction function.
Its design is fully based on industrial standard, for example, it is designed with bilateral keyboards which make it easy to operate, besides its appearance is processed by special material and reaches to the shockproof level.

This is obd2express.co.uk  engineers to show Mileage adjustment function.

How to use OBDSTAR X300 Pro3 correct odometer for Audi Q5 2010

https://youtu.be/FiL_SWACcZE

How to use OBDSTAR X300 Pro3 correct odometer for Volvo S80 2000

https://youtu.be/rrjSTzkbdN0

 

How to use OBDSTAR X300 Pro3 correct odometer for Porsche 

https://youtu.be/jGR_FxW9j_c

 source:http://www.mileageprogrammer.com/obdstar-x300-pro3-correct-odometer-for-audi-q5-2010volvo-s80porsche/

 

How to solve CAN Clip v159 RLT 2002 Probe “Failure of reservation of probe”

Here are optional user solutions for the Renault can clip v159 was connected to PC, detected with the number 926 573 and recognized " RLT2002 PROBE”, but CLIP popped an error message- "Failure of the reservation of the probe. Try it again and contact technical assistance in case of another failure” .

 

--> First, you can try the easy solution:

check in device manager, it is alliance B

yes works with both but not work on both on same partition so better to install on different computers or use the boot it.

best to install Clip first and let that update the firmware and then install Consult 3 scan tool  and enter serial you saw in Clip software , as above.

I have made it many many times .

 

--> Still not work??

That is....

You don't have a real CAN CLIP RLT2002 PROBE
You have a hybrid of Alliance VI in CAN CLIP case
It will work good don't bougter of it
It will install only one driver instead of 4 as for real CAN CLIP Probe
And much more of this it is working wit Consult III software till 9.21.02 as well

You can check and see the difference between this two kind of Chinese clones:

 

real CAN CLIP PROBE clone - RLT2002

clip_1

 

Allianbce hybrid Can Clip sonde - 926573

clip_2


This article is from the obdexpress.co.uk official technical blog:CAN Clip v159 RLT 2002 Probe “Failure of reservation of probe” (solved)