topblog Ivoire blogs

16/07/2018

FVDI 2018 device from obdexpress.co.uk: Works Good

FVDI 2018 commander feedback from http://mhhauto.com/:

Friend bought from this reseller device, the device did not work, I opened the device and the inside of the tile is from version 2015,

he seller is a fraud

https://www.ebay.de/itm/KFZ-Diagnosegera...Sw9sZa-uEE

after that he initiated a dispute on Paypal and returned the devices to the seller,

Paypal refused his claim for money, left without a 500 euro and no device.

Be careful about which devices you are buying.

I bought it here and it's all right for the device right now.

http://www.obdexpress.co.uk/wholesale/fvdi-abrites-comman...

Good luck

FVDI-2018-in-UK

 

Credits to stefks for the unbiased review

 

http://blog.obdexpress.co.uk/2018/07/16/where-to-buy-a-fv...

10/07/2018

Issues & Causes/Solutions: VCM 2 & Temperature

VCM 2 unit is housed in a shock resistant polycarbonate case with rubber end boots, along with an extended operating temperature and voltage range, for increased durability and ruggedness in service bay and road test environments,

 

BUT do ensure the VCM II is not subjected to extreme temperature or prolonged exposure to direct sunlight that may cause heating of the VCM II.

 

Environmental requirement: Temperature & Humidity

Operating:

VCM II unit: -20ºC to 70ºC (-4ºF to 158ºF)

Wireless USB 2.0 adapter: 0ºC to 50ºC (32ºF to 122ºF) at 10% to 90% RH non-condensing

 

Storage: -40ºC to 85ºC (-40ºF to 185ºF) at 10% to 90% RH non-condensing

 

 

Issues & Causes/Solutions: VCM 2 & Temperature

 

Issue:

VCM II turns off (shutsdown/suspends-operation, all LEDs off) immediately after being powered by the USB cable or DLC cable

 

Cause/Solution:

  • Verify the ambient temperature is within the acceptable operating range for the VCM II device: -20°C to 70°C (-4°F to 158°F)
  • If the ambient temperature is outside this range allow the temperature to return to the acceptable operating range and the VCM II will automatically resume operation
  • If VCM II error persists when the ambient temperature returns to its operating range, contact your regional technical support

 

Issue:

VCM II does not appear in the list of detected wireless devices in IDS and  its Power LED blinks at a periodic rate

 

Cause/Solution:

  • Verify the VCM II is connected to the DLC cable and the DLC cable is connected to the vehicle. The VCM II must be powered using the DLC cable for the wireless interface to be operational
  • Verify the ambient temperature is within the acceptable operating range for the VCM II's wireless interface: 0°C to 50°C (32°F to 122°F)
  • If the ambient temperature is outside this range allow the temperature to return to the acceptable operating range and the VCM II's wireless interface will automatically be enabled and the Power LED will stop blinking and stay illuminated
  • If VCM II wireless interface problem persists when the ambient temperature returns to its operating range, contact your regional technical support

 

Issue:

VCM II's Power LED blinks continuously after being powered using the DLC cable

 

Cause/Solution:

  • Verify the ambient temperature is within the acceptable operating range for the VCM II's wireless interface: 0°C to 50°C (32°F to 122°F)
  • If the ambient temperature is outside this range allow the temperature to return to the acceptable operating range and the VCM II's wireless interface will automatically be enabled and the Power LED will stop blinking and stay illuminated
  • If VCM II wireless interface problem persists when the ambient temperature returns to its operating range, contact your regional technical support or ask obdexpress.co.uk for help

Email: sales@OBDexpress.co.uk

Skype: obd2express.co.uk

WhatsApp: +86-18750906257

 


Src:

05:38 Publié dans Blog, car diagnosis tool | Tags : vcmii | Lien permanent | Commentaires (0)

06/07/2018

Possible to install Ford IDS + Mazda IDS in one PC?

Here,we have 3 ways to install Ford IDS and Mazda IDS in a computer/laptop:

 

Option 1:

One native install (e.g. Mazda IDS) and the other one on VMWare

 

Option 2:

Install and boot multiple operating systems using something like Boot It Bare Metal from Terabyte. Btw, I can recommend this one as it works like a charm. Never had any problems managing my partitions.

 

Option 3:

Have both in vmware –

you can find them on here as premade images just browse to automotive software forum then to vmware

using vmware is very easy and it has the advantage that if you mess up the program installation then you can just reload the image and be up and running in a few minuites

also with vmware you can stop it going onto the internet by disabling the VM network adapter, but still be on the internet with your computer so you can google the problem or find the file you need and then just drag and drop it inot the VM

 

VMWare 12.5.0 download:

https://mega.nz/#!s8lXyC5J!QUf2fV8yyxuKZ_oeniO18d1_7WMxAD...

pass: n8K684gE

it’s SCOTT’s work

 

IMPORTANT: the best way is to use VMware.

Some install both Ford and Mazda on real machine by install Mazda first, after that change the path of Mazda, then install Ford. But not successful by this method!

 

Free download Ford/Mazda IDS 109 latest version: (100% tested)

Ford IDS 109 download:

ford-ids-109-download

 

Mazda IDS 109 download:

MAZDA-ids-109-download

 

Mazda IDS108 download:

Ford IDS 107 download:

Ford IDS 98 VMware download:

 

Ford/Mazda IDS above tested by professional working for obdexpress.co.uk

Confirmed to work 100% with VXDIAG VCX NANO Ford/Mazda

You can use the link with relief!

Src: