topblog Ivoire blogs

26/05/2016

Carprog Full V8.21 v9.31 software Free Download

Now,you can available CARPROG FULL V8.21 Firmware Perfect Online Version with All 21 Adapters Including Much More Authorization and free carprog v9.31 software in obdexpress.

Free Download Carprog Full software:
Carprog V9.31(free, no activation)
http://www.chinaautodiag.com/download/carprog-9.31.zip

Tested with china Carprog like:
http://www.obdexpress.co.uk/wholesale/carprog-full-v4-01....

Carprog V8.21
http://www.chinaautodiag.com/download/carprog-full-v8.21-software.zip
(Needs activation but you will automatically get token renew after it used up)

Tested with china Carprog like:
http://www.obdexpress.co.uk/wholesale/carprog-full-new-fi...

Operating system: Win XP,Win7,Win8,Win10 32-bit
(Note: Disable anti-virus software program)

CARPROG FULL V8.21 Software:
ECU-OPEL - OPEL login reader from motor hybrid ECU. Works with Bosch ME1.5.5, Siemens SIMTEC71, SIMTEC71.1, Delco Diesel, Delco Multec.
OPEL CAN - Opel ECU by CAN programmer - read/change mileage in EDC16, MT35E, HSFI 2.2 read PIN, reset ECU
PSG16 - Opel PSG16 diesel pump by OBDII - read/change mileage, read PIN, reset ECU
OPEC28 - Opel Siemens Simtec ECU Tool Advanced

CARPROG V8.21 software shown as follows:

v8.21-carprog-software-1.jpg

v8.21-carprog-software-2.jpg

v8.21-carprog-software-3.jpg

v8.21-carprog-software-4.jpg

http://www.mileageprogrammer.com/how-to-reprogram-mileage...

How to use SK-670 Super Smart Car Key Machine to Copy ID/IC Card?

SK-670 Super Smart Car Key Machine ID-IC Card Copy Device can read and copy all 125KHz, 250KHz(PID encryption), 375KHz, 500KHz 625KHz,750KHz,875KHz,1000KHz ID card, also 13.56MHz IC card.

SK-670 Super Smart Car Key Machine.png

How to Copy ID Card with SK-670 Super Smart Car Key Machine
1,press (POW) button, screen displays the welcome word and voice prompt.
2, Click(ENT)button into the interface
3, Insert (Or put)your original ID card on the TX-Zone , and press (AUTO)button.
Then the machine will scan and check the frequency and output the card number, then screen display as following:

Copy ID Card with SK-670-1.png
4,Put another our new ID card/tags on TX zone, press “WRITE” button,wait until screen displays as following:

Copy ID Card with SK-670-2.png

How to Copy IC Card with SK-670 Super Smart Car Key Machine
1.If the original IC card hasn’t been encrypted, then you can copy it as ID card operation.
2.If encrypted, when read the card, machine will prompt : the card is encrypted, if crack it , please connect PC
3.Then follow steps as following:(Please remove the battery once connect the computer with USB cable)
1).Connect with computer with USB cable and wait until the USB driver installed well on your computer.(Please don’t press the “ENT”button, otherwise the driver couldn’t install well).
2).Double-click the computer (my computer) there will be a removable disk.

Copy Ic Card with SK-670-3.png
3)Double-click to open the mobile disk, there will be a software:VEB20151025.exe,copy this file to the computer desktop.

Copy Ic Card with SK-670-4.png
4)Press the confirm button(ENT) on the machine, put your original IC card on the TX-ZONE and read it, press double-click the “VEB20151025.exe ” file, then computer screen will display as following:

Copy Ic Card with SK-670-5.png
then click the “OK” button to entry.
5)Now your computer will display this following picture, Click"Start decoding" button to crack IC card

Copy Ic Card with SK-670-6.png
6)Each square represents an IC card data blocks, green color means has been decoded, red block means being decoding, dark gray means not decoding, white means invalid, blue bars represent decode progress.
When screen display "Decoding OK", then put new IC card on the TX-Zone, press "WRITE" button and wait until the screen display”WRITE OK”,that means the code was written well to the new IC card (If screen displays “Fail to write”, please try to move the new IC card and try to write again or change another new IC card.)
It is better to use UID card to work with this machine.

Copy Ic Card with SK-670-7.png

http://www.mileageprogrammer.com/tacho-pro-2008-programme...

25/05/2016

BMW F series model list for Ktag v6.070 , Kess V2 v4.036

Here is the BMW F-series model list for Ktag v6.070 and Kess V2 v4.036 ECU programmer.

Firmware requirement:
              Ktag v6.070      or        Kess V2 v4.036

ktag-6.070-kess-v2-4.036.jpg

ECU types:
- BOSCH EDC17C56
- BOSCH EDC17C50
-SIMENS MSV80
- BOSCH EDC17CP54

F series list can be done with KTAG & kess v2:

ktag-kess-v2-bmw-f-1-2-series.jpg

ktag-kess-v2-bmw-f-3-4-series.jpg

ktag-kess-v2-bmw-f-4-series.jpg

ktag-kess-v2-bmw-f-5-series-1.jpg

ktag-kess-v2-bmw-f-5-series-2.jpg

ktag-kess-v2-bmw-f-6-series.jpg

ktag-kess-v2-bmw-f-7-series.jpg

ktag-kess-v2-bmw-f-x-series.jpg

mileageprogrammer.com

09:55 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)