topblog Ivoire blogs

24/05/2016

CARPROG FULL V8.21 Firmware V8.21/ V9.31 software only 135EURO at obd2express.co.uk

CARPROG FULL V8.21 firmware V8.21 software online version and offline V9.31 is tested ok and available at obdexpress.co.uk. It features in with total 21 pieces of adapters for free of charge, newer version is tested ok on much more authorization than any other lower version.

carprog full V8.21 full package.jpg

carprog full V8.21 test-01.jpg

carprog full V8.21 test-04.jpg

CARPROG FULL fw V8.21 software version:
Considering users' actual needs, the packed CD is recorded with both software V8.21 and V9.31. you are required to active software V8.21 and after use up it will automatically get tokens renew, when you use software V9.31 it directly runs without activation.

Online and offline software:
Software V8.21 can be used online while software V9.31 cannot.

Carprog full fw V8.21 excitting highlights:
Can be used to reset airbag very fine
Cover new audi dash and newer airbags
All Computer Operation Systems (OS) are verified working fine: WINDOWS XP, WIN7, WIN8, WIN10 Operation system.

Carprog full fw V8.21 verified function:
Airbag reset, Dashboard, Immo, processor, EEPROM programmer and Radio Code.
Details as follows:
Carprog Full fw V8.21 is tested on airbag reset function for following car models:

S5.1 - VAG (Audi, VW, Skoda, Seat) Airbag Reset Tool
S5.2 - BMW Airbag Reset Tool
S5.3 - Mercedes Benz Airbag Reset Tool
S5.4 - FORD Airbag Reset Tool
S5.5 - GM Airbag Reset Tool by OBDII
S5.6 - CARPROG CR16 Airbag tool - Audi, Mercedes, Ford, Volvo
S5.7 - Renault Airbag reset tool
S5.8 - Peugeot Airbag Reset tool
S5.9 - Citroen Airbag Reset tool
S5.10 - Honda Airbag Reset tool
S5.11 - Audi Airbag reset tool by direct connection to EEPROM or MPU
S5.14 - Ford Airbag Reset tool by direct connection to EEPROM or MPU
S5.16 - Hyundai Airbag Reset tool
S5.17 - KIA Airbag Reset tool
S5.18 - Lexus Airbag Reset tool
S5.19 - Rover Airbag Reset tool
S5.21 - Mazda Airbag Reset tool
S5.22 - Mitsubishi airbag reset tool
S5.23 - Nissan Airbag reset tool
S5.20 - Mercedes Benz Airbag Reset tool by direct connection
S5.25 - Opel Airbag reset tool by direct connection
S5.27 - Saab Airbag reset tool by direct connection
S5.28 - Subaru Airbag reset tool by direct connection
S5.30 - Toyota Airbag reset tool by direct connection
S5.31 - Alfa Romeo Airbag Reset Tool
S5.32 - Fiat Airbag Reset Tool
S5.33 - Porsche Airbag Reset Tool
S5.34 - Suzuki Airbag Reset Tool
S5.35 - Volvo Airbag Reset Tool
S5.36 - Daewoo Airbag Reset Tool

3. CarProg Full fw V8.21 is tested on dashboard programming function for following car models:

S7.1 - VAG CAN programmer
S7.2 - CarProg Dashboard programming
S7.3 - CarProg Dashboard programming package update
S7.4 - Mercedes Benz ASSYST explorer
S7.5- VDO dash decrypt tool - Skoda Roomster, SuperB, VW Polo, Audi A3, A6, Allroad with 93C86 odometer change and PIN reading
S7.6 - Ford odometer change by OBDII (by CAN)
S7.7 - VW 2007+ by OBD - Golf, Passat, Eos, Touran, Tiguan, Octavia with Micronas by diagnostic
S7.8 - VAG VDO dashboards by K-line OBDII diagnostic - VW T5, Passat B5, Skoda SuperB and others
2J74YAUDI - Audi 2J74Y repair software for CarProg

4. CarProg Full fw V8.21 is tested on Immo function for following car models:
S4.7 - Kessy tool - A8, Touareg, Phaeton, Cayenne PIN code reader

5. CarProg Full Processor:
S2.1 - CARPROG Motorola (Freescale) HC05 MPU programmer
S2.2 - CARPROG Motorola (Freescale) HC11 MPU programmer
S2.3 - CARPROG Motorola (Freescale) HC08 MPU programmer
S2.4 - CARPROG Motorola (Freescale) 912 and 9S12 MPU

6. CarProg Full fw V8.21 is tested on EEPROM funciton for following car models:
ST92 - ST92F120, ST92F150, ST92F250 internal EEPROM programmer

7. CarProg Full fw V8.21 is tested on radio Code function for following car models:
S6.1 - CARPROG CC1
S6.2 - CARPROG CC2
S6.3 - CARPROG CCN
S6.4 - Philips Car Radio decoder
S6.5 - Renault Car Radio decoder by serial number
S6.6 - Audi/VW/Seat/Skoda car radio decoding software
RNS510 - Navigation decoding tool by Navi diagnostic

www.mileageprogrammer.com

09:07 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

23/05/2016

How to update FPMC001 incode calculator to V1.7

FMPC001 INCODE Calculator for FORD and MAZDA no token limitation new software V1.7 has newly released in obd2express.

new-fmpc001-incode-calculator-for-ford-mazda-des-1.jpg
1. Latest version: V1.7
2. No computer is needed. Connect to OBD2 connector and play!
3. Support 6 digits OUTCODE transfer to 4 digits INCODE for old Ford and Mazda.
4. Also work for 2014+ new Focus3, 2010+ Kuga, 2014+ Mondeo, etc.
5. Updated online.
6. NO TOKEN LIMITATION
(Attention: For most vehicles, it does not need tokens. But for latest Ford Mondeo, Ford ESCORT, ford Mustang and so on, still need tokens. This machine comes with 50 tokens. After this tokens are run over, you can buy tokens from us, 105USD for 50 tokens.)

How to update FPMC001 incode calculator to V1.7?
Note:
1. Update will automatically add/recharge 50 tokens, no need to add token.
2.Do follow these steps, otherwise you will have update error.)
1)Connect FMPC001 to PC via USB cable
2)install drivers
3)copy FMPC DFU V1.1.exe and FMPC_V1.7 Upgrade.bin to desktop
4)rename: FMPC_V1.7 Upgrade.bin to 1.bin
5)start update

How to update FMPC001 INCODE Calculator for FORD and MAZDA


How To Get tokens after used up the previews 50 tokens
1. Each 50 Tokens price is €102.00, need contact our customer sevice to buy the token sevice
2. After you make the payment, please tell us your serial number, we will contact the factory to add the tokens for you
3. We will inform you after tokens are added.
5. We will give you the account to add the tokens. Including ID and password.
6. Connect FMPC001 with PC and install the driver, after finish the installation, open the Update Tool to update and finish it.

PS:If you need the V1.7 update file,please contact our customer service.
E-mail:sales@obd2express.co.uk
Skype:obd2express.co.uk

mileageprogrammer.com

05:37 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)

20/05/2016

(Fixed) BMW E90 errors Winkpf errors after update MRS

This post starts with the errors that I have in MRS (airbags and seatbelts) after I updated MRS module using WinKpf. Finally I got it fixed, how to do? Go on reading following parts.

Tool I use:
WinKpf
Btw, I bought from
http://www.obdexpress.co.uk/wholesale/icom-hdd-with-engin...

What I did:
I updated MRS module using WinKpf

Issue:
I have errors in MRS (airbags and seatbelts), I used tool32 (sfz.prg / systemzeit_starten) but no luck. I've heard that is possible to reset system time using ISTA/D to fix it. But I couldn't find it.
I updated CAS because of error with ELV steering blocks problem. And after that I wanted to update rest of module.
I've heard that I should use NCS to coding new version of MRS.

errors in MRS.jpg
Finally, Solved!!!
It's working properly, I've done:
Detei-> Profil laden -> Expert mode -> VIN/ZCS/FA ->ZCS/Fa f. ECU -> E89 -> CAS -> BACK -> Process ECU -> ABG -> (SG Codieren) Excute job.
Note: It doesn't matter if you choose CAS or FRM, very important is expert mode profile. Once you load this, go for updated module and choose job sg_codieren. It wil code module to factory data setup.

05:01 Publié dans Blog, Shopping, Web | Lien permanent | Commentaires (0)